273 research outputs found

    Carrier Frequency Offset Estimation for OFDM Systems using Repetitive Patterns

    Get PDF
    This paper deals with Carrier Frequency Offset (CFO) estimation for OFDM systems using repetitive patterns in the training symbol. A theoretical comparison based on Cramer Rao Bounds (CRB) for two kinds of CFO estimation methods has been presented in this paper. Through the comparison, it is shown that the performance of CFO estimation can be improved by exploiting the repetition property and the exact training symbol rather than exploiting the repetition property only. The selection of Q (number of repetition patterns) is discussed for both situations as well. Moreover, for exploiting the repetition and the exact training symbol, a new numerical procedure for the Maximum-Likelihood (ML) estimation is designed in this paper to save computational complexity. Analysis and numerical result are also given, demonstrating the conclusions in this paper

    A robust timing and frequency synchronization for OFDM systems

    Get PDF
    Abstract—A robust symbol-timing and carrier-frequency synchronization scheme applicable to orthogonal frequency-division-multiplexing systems is presented. The proposed method is based on a training symbol specifically designed to have a steep rolloff timing metric. The proposed timing metric also provides a robust sync detection capability. Both time domain training and frequency domain (FD) training are investigated. For FD training, maintaining a low peak-to-average power ratio of the training symbol was taken into consideration. The channel estimation scheme based on the designed training symbol was also incorporated in the system in order to give both fine-timing and frequency-offset estimates. For fine frequency estimation, two approaches are presented. The first one is based on the suppression of the interference introduced in the frequency estimation process by the training symbol pattern in the context of multipath dispersive channels. The second one is based on the maximum likelihood principle and does not suffer from any interference. A new performance measure is introduced for timing estimation, which is based on the plot of signal to timing-error-induced average interference power ratio against the timing estimate shift. A simple approach for finding the optimal setting of the timing estimator is presented. Finally, the sync detection, timing estimation, frequency estimation, and bit-error-rate performance of the proposed method are presented in a multipath Rayleigh fading channel. Index Terms—Frequency-offset estimation, orthogonal frequency-division multiplexing (OFDM), symbol-timing estimation, synchronization, training symbol. I

    A frame synchronization and frequency offset estimation algorithm for OFDM system and its analysis

    Get PDF
    Orthogonal frequency division multiplexing (OFDM) is a parallel transmission scheme for transmitting data at very high rates over time dispersive radio channels. In an OFDM system, frame synchronization and frequency offset estimation are extremely important for maintaining orthogonality among the subcarriers. In this paper, for a preamble having two identical halves in time, a timing metric is proposed for OFDM frame synchronization. The timing metric is analyzed and its mean values at the preamble boundary and in its neighborhood are evaluated, for AWGN and for frequency selective channels with specified mean power profile of the channel taps, and the variance expression is derived for AWGN case. Since the derivation of the variance expression for frequency selective channel case is tedious, we used simulations to estimate the same. Based on the theoretical value of the mean and estimate of the variance, we suggest a threshold for detection of the preamble boundary and evaluating the probability of false and correct detections. We also suggest a method for a threshold selection and the preamble boundary detection in practical applications. A simple and computationally efficient method for estimating fractional and integer frequency offset, using the same preamble, is also described. Simulations are used to corroborate the results of the analysis. The proposed method of frame synchronization and frequency offset estimation is applied to the downlink synchronization in OFDM mode of wireless metropolitan area network (WMAN) standard IEEE 802.16-2004, and its performance is studied through simulations

    Low Complexity Time Synchronization Algorithm for OFDM Systems with Repetitive Preambles

    Full text link
    In this paper, a new time synchronization algorithm for OFDM systems with repetitive preamble is proposed. This algorithm makes use of coarse and fine time estimation; the fine time estimation is performed using a cross-correlation similar to previous proposals in the literature, whereas the coarse time estimation is made using a new metric and an iterative search of the last sample of the repetitive preamble. A complete analysis of the new metric is included, as well as a wide performance comparison, for multipath channel and carrier frequency offset, with the main time synchronization algorithms found in the literature. Finally, the complexity of the VLSI implementation of this proposal is discussed. © 2011 Springer Science+Business Media, LLC.This work was supported by the Spanish Ministerio de Educacion y Ciencia under grants TEC2006-14204-C02-01 and TEC2008-06787.Canet Subiela, MJ.; Almenar Terre, V.; Flores Asenjo, SJ.; Valls Coquillat, J. (2012). Low Complexity Time Synchronization Algorithm for OFDM Systems with Repetitive Preambles. Journal of Signal Processing Systems. 68(3):287-301. doi:10.1007/s11265-011-0618-6S287301683IEEE 802.11a standard (1999). Wireless LAN medium access control (MAC) and physical layer (PHY) specifications: high-speed physical layer in the 5 GHz band.IEEE 802.11 g standard (2003). Wireless LAN specifications: Further higher data rate extension in the 2.4 GHz band.IEEE 802.16-2004 (2004). Standard for local and metropolitan area networks, part 16: Air interface for fixed broadband wireless access systems.Lee, D., & Cheun, K. (2002). Coarse symbol synchronization algorithms for OFDM systems in multipath channels. IEEE Communications Letters, 6(10), 446–448.Park, B., Cheon, H., Ko, E., Kang, C., & Hong, D. (2004). A blind OFDM synchronization algorithm based on cyclic correlation. IEEE Signal Processing Letters, 11(2), 83–85.Beek, J. J., Sandell, M., & Börjesson, P. O. (1997). ML estimation of time and frequency offset in OFDM system. IEEE Transactions on Signal Processing, 45(7), 1800–1805.Ma, S., Pan, X., Yang, G., & Ng, T. (2009). Blind symbol synchronization based on cyclic prefix for OFDM systems. IEEE Transactions on Vehicular Technology, 58(4), 1746–1751.Schmidl, T., & Cox, D. (1997). Robust frequency and timing synchronization for OFDM. IEEE Transactions on Communications, 45(12), 1613–1621.Coulson, A. J. (2001). Maximum likelihood synchronization for OFDM using a pilot symbol: Algorithms. IEEE Journal on Selected Areas in Communications, 19(12), 2495–2503.Tufvesson, F., Edfors, O., & Faulker, M. (1999). Time and frequency synchronization for OFDM using PN-sequence preambles. Proceedings of the Vehicular Technology Conference (VTC), 4, 2203–2207.Shi, K., & Serpedin, E. (2004). Coarse frame and carrier synchronization of OFDM systems: a new metric and comparison. IEEE Transactions on Wireless Communications, 3(4), 1271–1284.Minn, H., Zeng, M., & Bhargava, V. K. (2000). On timing offset estimation for OFDM Systems. IEEE Communications Letters, 4, 242–244.Minn, H., Bhargava, V. K., & Letaief, K. B. (2003). A robust timing and frequency synchronization for OFDM systems. IEEE Transactions on Wireless Communications, 2(4), 822–839.Minn, H., Bhargava, V. K., & Letaief, K. B. (2006). A combined timing and frequency synchronization and channel estimation for OFDM. IEEE Transactions on Communications, 54(3), 416–422.Park, B., Cheon, H., Ko, E., Kang, C., & Hong, D. (2003). A novel timing estimation method for OFDM systems. IEEE Communications Letters, 7(5), 239–241.Chang, S., & Kelley, B. (2003). Time synchronization for OFDM-based WLAN systems. Electronics Letters, 39(13), 1024–1026.Wu, Y., Yip, K., Ng, T., & Serpedin, E. (2005). Maximum-likelihood symbol synchronization for IEEE 802.11a WLANs in unknown frequency-selective fading channels. IEEE Transactions on Wireless Communications, 4(6), 2751–2763.Larsson, E. G., Liu, G., Li, J., & Giannakis, G. B. (2001). Joint symbol timing and channel estimation for OFDM based WLANs. IEEE Communications Letters, 5(8), 325–327.Troya, A., Maharatna, K., Krstic, M., Grass, E., Jagdhold, U., & Kraemer, R. (2007). Efficient inner receiver design for OFDM-based WLAN systems: algorithm and architecture. IEEE Transactions on Wireless Communications, 6(4), 1374–1385.Yang, J., & Cheun, K. (2006). Improved symbol timing synchronization in IEEE 802.11a/g wireless LAN systems in multipath channels. International Conference on Consumer Electronics. doi: 10.1109/ICCE.2006.1598425 .Manusani, S. K., Hshetrimayum, R. S., & Bhattacharjee, R. (2006). Robust time and frequency synchronization in OFDM based 802.11a WLAN systems. Annual India Conference. doi: 10.1109/INDCON.2006.302775 .Zhou, L., & Saito, M. (2004). A new symbol timing synchronization for OFDM based WLANs under multipath fading channels. 15th IEEE International Symposium on Personal, Indoor and Mobile Radio Communications. doi: 10.1109/PIMRC.2004.1373890 .Kim, T., & Park, S.-C. (2007). A new symbol timing and frequency synchronization design for OFDM-based WLAN systems. 9th Conference on Advanced Communication Technology. doi: 10.1109/ICACT.2007.358691 .Baek, J. H., Kim, S. D., & Sunwoo, M. H. (2008). SPOCS: Application specific signal processor for OFDM communication systems. Journal of Signal Processing Systems, 53(3), 383–397.Van Kempen, G., & van Vliet, L. (2000). Mean and variance of ratio estimators used in fluorescence ratio imaging. Cytometry, 39(4), 300–305.J. Melbo, J., & Schramm, P. (1998). Channel models for HIPERLAN/2 in different indoor scenarios. 3ERI085B, HIPERLAN/2 ETSI/BRAN contribution.Abramowitz, M., & Stegun, I. A. (1972). Handbook of mathematical functions. Dover.López-Martínez, F. J., del Castillo-Sánchez, E., Entrambasaguas, J. T., & Martos-Naya, E. (2010). Iterative-gradient based complex divider FPGA core with dynamic configurability of accuracy and throughput. Journal of Signal Processing Systems. doi: 10.1007/s11265-010-0464-y .Angarita, F., Canet, M. J., Sansaloni, T., Perez-Pascual, A., & Valls, J. (2008). Efficient mapping of CORDIC Algorithm for OFDM-based WLAN. Journal of Signal Processing Systems, 52(2), 181–191

    Develop of CFO in High Mobility Environments for OFDM-DMWT Based Mobile Wireless Applications

    Get PDF
    An “Orthogonal Frequency division Multiplexing (OFDM)” systems are sensitive to “service Frequency Offset (CFO)” mistakes. OFDM- “Discrete Multi-wavelet remodel (DMWT)” based totally cellular wireless with a sender, a provider Frequency Offset errors turns into similarly tough for cellular applications in view that power postpone outline of the channel may trade quick because of the sporadic start and dying of the channel paths. We discover analytical expressions for channel estimation mistakes inside the existence of CFO mistakes and excessive mobility. We display that the sensitivity of the channel estimator be capable of still be exploited to increase CFO in high mobility environments. A comparative have a look at amongst extraordinary techniques of service frequency offset estimation in OFDM systems is offered. We keep in mind strategies in frequency area are considered, namely; training image approach and Pilot tone technique. Mean square blunders (MSE) is the evaluation criteria used within the look at. Simulation consequences display that the CFO estimation strategies the schooling image technique outperforms the pilot tone approach with the aid of about 2dB. The contrast results are considered at MSE of 10-4 and normalized CFO of 0.2. Keywords— CFO, ICI, BER, SNR, OFDM, DMWT, MSE, Frequency domain. DOI: 10.7176/NCS/10-04 Publication date:July 31st 201

    Waveform Advancements and Synchronization Techniques for Generalized Frequency Division Multiplexing

    Get PDF
    To enable a new level of connectivity among machines as well as between people and machines, future wireless applications will demand higher requirements on data rates, response time, and reliability from the communication system. This will lead to a different system design, comprising a wide range of deployment scenarios. One important aspect is the evolution of physical layer (PHY), specifically the waveform modulation. The novel generalized frequency division multiplexing (GFDM) technique is a prominent proposal for a flexible block filtered multicarrier modulation. This thesis introduces an advanced GFDM concept that enables the emulation of other prominent waveform candidates in scenarios where they perform best. Hence, a unique modulation framework is presented that is capable of addressing a wide range of scenarios and to upgrade the PHY for 5G networks. In particular, for a subset of system parameters of the modulation framework, the problem of symbol time offset (STO) and carrier frequency offset (CFO) estimation is investigated and synchronization approaches, which can operate in burst and continuous transmissions, are designed. The first part of this work presents the modulation principles of prominent 5G candidate waveforms and then focuses on the GFDM basic and advanced attributes. The GFDM concept is extended towards the use of OQAM, introducing the novel frequency-shift OQAM-GFDM, and a new low complexity model based on signal processing carried out in the time domain. A new prototype filter proposal highlights the benefits obtained in terms of a reduced out-of-band (OOB) radiation and more attractive hardware implementation cost. With proper parameterization of the advanced GFDM, the achieved gains are applicable to other filtered OFDM waveforms. In the second part, a search approach for estimating STO and CFO in GFDM is evaluated. A self-interference metric is proposed to quantify the effective SNR penalty caused by the residual time and frequency misalignment or intrinsic inter-symbol interference (ISI) and inter-carrier interference (ICI) for arbitrary pulse shape design in GFDM. In particular, the ICI can be used as a non-data aided approach for frequency estimation. Then, GFDM training sequences, defined either as an isolated preamble or embedded as a midamble or pseudo-circular pre/post-amble, are designed. Simulations show better OOB emission and good estimation results, either comparable or superior, to state-of-the-art OFDM system in wireless channels

    Periodic Preamble-Based Frequency Recovery in OFDM Receivers Plagued by I/Q Imbalance

    Get PDF
    The direct conversion receiver (DCR) architecture has received much attention in the last few years as an effective means to obtain user terminals with reduced cost, size, and power consumption. A major drawback of a DCR device is the possible insertion of I/Q imbalances in the demodulated signal, which can seriously degrade the performance of conventional synchronization algorithms. In this paper, we investigate the problem of carrier frequency offset (CFO) recovery in an OFDM receiver equipped with a DCR front-end. Our approach is based on maximum likelihood (ML) arguments and aims at jointly estimating the CFO, the useful signal component, and its mirror image. In doing so, we exploit knowledge of the pilot symbols transmitted within a conventional repeated training preamble appended in front of each data packet. Since the exact ML solution turns out to be too complex for practical purposes, we propose two alternative schemes which can provide nearly optimal performance with substantial computational saving. One of them provides the CFO in closed-form, thereby avoiding any grid-search procedure. The accuracy of the proposed methods is assessed in a scenario compliant with the 802.11a WLAN standard. Compared with existing solutions, the novel schemes achieve improved performance at the price of a tolerable increase of the processing load
    • …
    corecore