Free-boundary Linear Parameterization of 3D Meshes in the Presence of Constraints

Linear parameterization of 3D meshes with disk topology is usually performed using the method of barycentric coordinates pioneered by Tutte and Floater. This imposes a convex boundary on the parameterization which can significantly distort the result. Recently, several methods showed how to relax the convex boundary requirement while still using the barycentric coordinates formulation. However, this relaxation can result in other artifacts in the parameterization. In this paper we explore these methods and give a general recipe for "natural" boundary conditions for the family of so-called "three point" barycentric coordinates. We discuss the shortcomings of these methods and show how they may be rectified using an iterative scheme or a carefully crafted "virtual boundary". Finally, we show how these methods adapt easily to solve the problem of constrained parameterization.Engineering and Applied Science

Repairing triangle meshes built from scanned point cloud

The Reverse Engineering process consists of a succession of operations that aim at creating a digital representation of a physical model. The reconstructed geometric model is often a triangle mesh built from a point cloud acquired with a scanner. Depending on both the object complexity and the scanning process, some areas of the object outer surface may never be accessible, thus inducing some deficiencies in the point cloud and, as a consequence, some holes in the resulting mesh. This is simply not acceptable in an integrated design process where the geometric models are often shared between the various applications (e.g. design, simulation, manufacturing). In this paper, we propose a complete toolbox to fill in these undesirable holes. The hole contour is first cleaned to remove badly-shaped triangles that are due to the scanner noise. A topological grid is then inserted and deformed to satisfy blending conditions with the surrounding mesh. In our approach, the shape of the inserted mesh results from the minimization of a quadratic function based on a linear mechanical model that is used to approximate the curvature variation between the inner and surrounding meshes. Additional geometric constraints can also be specified to further shape the inserted mesh. The proposed approach is illustrated with some examples coming from our prototype software

Towards recovery of complex shapes in meshes using digital images for reverse engineering applications

When an object owns complex shapes, or when its outer surfaces are simply inaccessible, some of its parts may not be captured during its reverse engineering. These deficiencies in the point cloud result in a set of holes in the reconstructed mesh. This paper deals with the use of information extracted from digital images to recover missing areas of a physical object. The proposed algorithm fills in these holes by solving an optimization problem that combines two kinds of information: (1) the geometric information available on the surrounding of the holes, (2) the information contained in an image of the real object. The constraints come from the image irradiance equation, a first-order non-linear partial differential equation that links the position of the mesh vertices to the light intensity of the image pixels. The blending conditions are satisfied by using an objective function based on a mechanical model of bar network that simulates the curvature evolution over the mesh. The inherent shortcomings both to the current holefilling algorithms and the resolution of the image irradiance equations are overcom