1,807 research outputs found
Asynchronous Data Processing Platforms for Energy Efficiency, Performance, and Scalability
The global technology revolution is changing the integrated circuit industry from the one driven by performance to the one driven by energy, scalability and more-balanced design goals. Without clock-related issues, asynchronous circuits enable further design tradeoffs and in operation adaptive adjustments for energy efficiency. This dissertation work presents the design methodology of the asynchronous circuit using NULL Convention Logic (NCL) and multi-threshold CMOS techniques for energy efficiency and throughput optimization in digital signal processing circuits. Parallel homogeneous and heterogeneous platforms implementing adaptive dynamic voltage scaling (DVS) based on the observation of system fullness and workload prediction are developed for balanced control of the performance and energy efficiency. Datapath control logic with NULL Cycle Reduction (NCR) and arbitration network are incorporated in the heterogeneous platform for large scale cascading. The platforms have been integrated with the data processing units using the IBM 130 nm 8RF process and fabricated using the MITLL 90 nm FDSOI process. Simulation and physical testing results show the energy efficiency advantage of asynchronous designs and the effective of the adaptive DVS mechanism in balancing the energy and performance in both platforms
Design and Comparison of Asynchronous FFT Implementations
Fast Fourier Transform (FFT) is a widely used digital signal processing technology in a large variety of applications. For battery-powered embedded systems incorporating FFT, its physical implementation is constrained by strict power consumption, especially during idle periods. Compared to the prevailing clocked synchronous counterpart, quasi-delay insensitive asynchronous circuits offer a series of advantages including flexible timing requirement and lower leakage power, making them ideal choices for these systems. In this thesis work, various FFT configurations were implemented in the low-power Multi-Threshold NULL Convention Logic (MTNCL) paradigm. Analysis illustrates the area and power consumption trends along the changing of the number of points, data widths, and the number of pipeline stages
Design and Comparison of Asynchronous FFT Implementations
Fast Fourier Transform (FFT) is a widely used digital signal processing technology in a large variety of applications. For battery-powered embedded systems incorporating FFT, its physical implementation is constrained by strict power consumption, especially during idle periods. Compared to the prevailing clocked synchronous counterpart, quasi-delay insensitive asynchronous circuits offer a series of advantages including flexible timing requirement and lower leakage power, making them ideal choices for these systems. In this thesis work, various FFT configurations were implemented in the low-power Multi-Threshold NULL Convention Logic (MTNCL) paradigm. Analysis illustrates the area and power consumption trends along the changing of the number of points, data widths, and the number of pipeline stages
A scalable multi-core architecture with heterogeneous memory structures for Dynamic Neuromorphic Asynchronous Processors (DYNAPs)
Neuromorphic computing systems comprise networks of neurons that use
asynchronous events for both computation and communication. This type of
representation offers several advantages in terms of bandwidth and power
consumption in neuromorphic electronic systems. However, managing the traffic
of asynchronous events in large scale systems is a daunting task, both in terms
of circuit complexity and memory requirements. Here we present a novel routing
methodology that employs both hierarchical and mesh routing strategies and
combines heterogeneous memory structures for minimizing both memory
requirements and latency, while maximizing programming flexibility to support a
wide range of event-based neural network architectures, through parameter
configuration. We validated the proposed scheme in a prototype multi-core
neuromorphic processor chip that employs hybrid analog/digital circuits for
emulating synapse and neuron dynamics together with asynchronous digital
circuits for managing the address-event traffic. We present a theoretical
analysis of the proposed connectivity scheme, describe the methods and circuits
used to implement such scheme, and characterize the prototype chip. Finally, we
demonstrate the use of the neuromorphic processor with a convolutional neural
network for the real-time classification of visual symbols being flashed to a
dynamic vision sensor (DVS) at high speed.Comment: 17 pages, 14 figure
Circuit design and analysis for on-FPGA communication systems
On-chip communication system has emerged as a prominently important subject in Very-Large-
Scale-Integration (VLSI) design, as the trend of technology scaling favours logics more than interconnects.
Interconnects often dictates the system performance, and, therefore, research for new
methodologies and system architectures that deliver high-performance communication services
across the chip is mandatory. The interconnect challenge is exacerbated in Field-Programmable
Gate Array (FPGA), as a type of ASIC where the hardware can be programmed post-fabrication.
Communication across an FPGA will be deteriorating as a result of interconnect scaling. The programmable
fabrics, switches and the specific routing architecture also introduce additional latency
and bandwidth degradation further hindering intra-chip communication performance.
Past research efforts mainly focused on optimizing logic elements and functional units in FPGAs.
Communication with programmable interconnect received little attention and is inadequately understood.
This thesis is among the first to research on-chip communication systems that are built on
top of programmable fabrics and proposes methodologies to maximize the interconnect throughput
performance. There are three major contributions in this thesis: (i) an analysis of on-chip
interconnect fringing, which degrades the bandwidth of communication channels due to routing
congestions in reconfigurable architectures; (ii) a new analogue wave signalling scheme that significantly
improves the interconnect throughput by exploiting the fundamental electrical characteristics
of the reconfigurable interconnect structures. This new scheme can potentially mitigate
the interconnect scaling challenges. (iii) a novel Dynamic Programming (DP)-network to provide
adaptive routing in network-on-chip (NoC) systems. The DP-network architecture performs runtime
optimization for route planning and dynamic routing which, effectively utilizes the in-silicon
bandwidth. This thesis explores a new horizon in reconfigurable system design, in which new
methodologies and concepts are proposed to enhance the on-FPGA communication throughput
performance that is of vital importance in new technology processes
Exploration and Design of High Performance Variation Tolerant On-Chip Interconnects
Siirretty Doriast
Doctor of Philosophy
dissertationPortable electronic devices will be limited to available energy of existing battery chemistries for the foreseeable future. However, system-on-chips (SoCs) used in these devices are under a demand to offer more functionality and increased battery life. A difficult problem in SoC design is providing energy-efficient communication between its components while maintaining the required performance. This dissertation introduces a novel energy-efficient network-on-chip (NoC) communication architecture. A NoC is used within complex SoCs due it its superior performance, energy usage, modularity, and scalability over traditional bus and point-to-point methods of connecting SoC components. This is the first academic research that combines asynchronous NoC circuits, a focus on energy-efficient design, and a software framework to customize a NoC for a particular SoC. Its key contribution is demonstrating that a simple, asynchronous NoC concept is a good match for low-power devices, and is a fruitful area for additional investigation. The proposed NoC is energy-efficient in several ways: simple switch and arbitration logic, low port radix, latch-based router buffering, a topology with the minimum number of 3-port routers, and the asynchronous advantages of zero dynamic power consumption while idle and the lack of a clock tree. The tool framework developed for this work uses novel methods to optimize the topology and router oorplan based on simulated annealing and force-directed movement. It studies link pipelining techniques that yield improved throughput in an energy-efficient manner. A simulator is automatically generated for each customized NoC, and its traffic generators use a self-similar message distribution, as opposed to Poisson, to better match application behavior. Compared to a conventional synchronous NoC, this design is superior by achieving comparable message latency with half the energy
- …