Electronic Photonic Integrated Circuits and Control Systems

Photonic systems can operate at frequencies several orders of magnitude higher than electronics, whereas electronics offers extremely high density and easily built memories. Integrated photonic-electronic systems promise to combine advantage of both, leading to advantages in accuracy, reconfigurability and energy efficiency. This work concerns of hybrid and monolithic electronic-photonic system design. First, a high resolution voltage supply to control the thermooptic photonic chip for time-bin entanglement is described, in which the electronics system controller can be scaled with more number of power channels and the ability to daisy-chain the devices. Second, a system identification technique embedded with feedback control for wavelength stabilization and control model in silicon nitride photonic integrated circuits is proposed. Using the system, the wavelength in thermooptic device can be stabilized in dynamic environment. Third, the generation of more deterministic photon sources with temporal multiplexing established using field programmable gate arrays (FPGAs) as controller photonic device is demonstrated for the first time. The result shows an enhancement to the single photon output probability without introducing additional multi-photon noise. Fourth, multiple-input and multiple-output (MIMO) control of a silicon nitride thermooptic photonic circuits incorporating Mach Zehnder interferometers (MZIs) is demonstrated for the first time using a dual proportional integral reference tracking technique. The system exhibits improved performance in term of control accuracy by reducing wavelength peak drift due to internal and external disturbances. Finally, a monolithically integrated complementary metal oxide semiconductor (CMOS) nanophotonic segmented transmitter is characterized. With segmented design, the monolithic Mach Zehnder modulator (MZM) shows a low link sensitivity and low insertion loss with driver flexibility

Destination directed packet switch architecture for a 30/20 GHz FDMA/TDM geostationary communication satellite network

Emphasis is on a destination directed packet switching architecture for a 30/20 GHz frequency division multiplex access/time division multiplex (FDMA/TDM) geostationary satellite communication network. Critical subsystems and problem areas are identified and addressed. Efforts have concentrated heavily on the space segment; however, the ground segment was considered concurrently to ensure cost efficiency and realistic operational constraints

Hardware-Software Integrated Silicon Photonic Systems

Fabrication of integrated photonic devices and circuits in a CMOS-compatible process or foundry is the essence of the silicon photonic platform. Optical devices in this platform are enabled by the high index contrast between silicon and silicon on insulator. These devices offer potential benefits when integrated with existing and emerging high performance microelectronics. Integration of silicon photonics with small footprints and power-efficient and high-bandwidth operation has long been cited as a solution to existing issues in high performance interconnects for telecommunications and data communication. Stemming from this historic application in communications, new applications in sensing arrays, biochemistry, and even entertainment continue to grow. However, for many technologies to successfully adopt silicon photonics and reap the perceived benefits, the silicon photonic platform must extend toward development of a full ecosystem. Such extension includes implementation of low cost and robust electronic-photonic packaging techniques for all applications. In an ecosystem implemented with services ranging from device fabrication all the way to packaged products, ease-of-use and ease-of-deployment in systems that require many hardware and software components becomes possible. With the onset of the Internet of Things (IoT), nearly all technologies—sensors, compute, communication devices, etc.—persist in systems with some level of localized or distributed software interaction. These interactions often require a level of networked communications. For silicon photonics to penetrate technologies comprising IoT, it is advantageous to implement such devices in a hardware-software integrated way. Meaning, all functionalities and interactions related to the silicon photonic devices are well defined in terms of the physicality of the hardware. This hardware is then abstracted into various levels of software as needed in the system. The power of hardware-software integration allows many of the piece-wise demonstrated functionalities of silicon photonics to easily translate to commercial implementation. This work begins by briefly highlighting the challenges and solutions for transforming existing silicon photonic platforms to a full-fledged silicon photonic ecosystem. The highlighted solutions in development consist of tools for fabrication, testing, subsystem packaging, and system validation. Building off the knowledge of a silicon photonic ecosystem in development, this work continues by demonstrating various levels of hardware-software integration. These are primarily focused on silicon photonic interconnects. The first hardware-software integration-focused portion of this work explores silicon microring-based devices as a key building block for greater silicon photonic subsystems. The microring’s sensitivity to thermal fluctuations is identified not as a flaw, but as a tool for functionalization. A logical control system is implemented to mitigate thermal effects that would normally render a microring resonator inoperable. The mechanism to control the microring is extended and abstracted with software programmability to offer wavelength routing as a network primitive. This functionality, available through hardware-software integration, offers the possibility for ubiquitous deployment of such microring devices in future photonic interconnection networks. The second hardware-software integration-focused portion of this work explores dynamic silicon photonic switching devices and circuits. Specifically, interactions with and implications of high-speed data propagation and link layer control are demonstrated. The characteristics of photonic link setup include transients due to physical layer optical effects, latencies involved with initializing burst mode links, and optical link quality. The impacts on the functionalities and performance offered by photonic devices are explored. An optical network interface platform is devised using FPGAs to encapsulate hardware and software for controlling these characteristics using custom hardware description language, firmware, and software. A basic version of a silicon photonic network controller using FPGAs is used as a tool to demonstrate a highly scalable switch architecture using microring resonators. This architecture would not be possible without some semblance of this controller, combined with advanced electronic-photonic packaging. A more advanced deployment of the network interface platform is used to demonstrate a method for accelerating photonic links using out-of-band arbitration. A first demonstration of this platform is performed on a silicon photonic microring router network. A second demonstration is used to further explore the feasibility of full hardware-software integrated photonic device actuation, link layer control, and out-of-band arbitration. The demonstration is performed on a complete silicon photonic network with both spatial switching and wavelength routing functionalities. The aforementioned hardware-software integration mechanisms are rigorously tested for data communications applications. Capabilities are shown for very reliable, low latency, and dynamic high-speed data delivery using silicon photonic devices. Applying these mechanisms to complete electronic-photonic packaged subsystems provides a strong path to commercial manifestations of functional silicon photonic devices

A tunable-channel multi-access wavelength division multiplexed network and surveillance schemes for optical cross-connects.

by Eddie Ting Pong Kong.Thesis (M.Phil.)--Chinese University of Hong Kong, 1999.Includes bibliographical references (leaves 61-68).Abstracts in English and Chinese.Chapter 1 --- Introduction --- p.1Chapter 1.1 --- Optical Network Architecture --- p.1Chapter 1.2 --- High-Speed All-Optical Tunable-Channel Multi-Access Networks --- p.3Chapter 1.3 --- Fault Surveillance of Optical Cross-Connects in Wavelength Routing Network --- p.3Chapter 1.4 --- Outline of the Thesis --- p.5Chapter 2 --- Optical Multi-Access Networks --- p.6Chapter 2.1 --- All-Optical Networks --- p.6Chapter 2.2 --- Optical Multi-Access Schemes --- p.8Chapter 2.2.1 --- Wavelength-Division Multi-Access (WDMA) --- p.9Chapter 2.2.2 --- Time-Division Multi-Access (TDMA) --- p.12Chapter 2.2.3 --- Subcarrier Multi-Access (SCMA) --- p.14Chapter 2.3 --- Design Considerations --- p.14Chapter 3 --- All-Optical Tunable-Channel Multi-Access Networks --- p.18Chapter 3.1 --- Tunable-Channel Multi-Access Networks --- p.19Chapter 3.2 --- Protocols for TCMA Networks --- p.20Chapter 3.3 --- Photonic Implementation of a Wavelength Division TCMA Network with Time- Slot Access --- p.23Chapter 3.3.1 --- Proposed Network Architecture --- p.25Chapter 3.3.2 --- Experimental Results --- p.30Chapter 3.3.3 --- Discussion --- p.34Chapter 3.3.4 --- Summary --- p.35Chapter 4 --- Fault Surveillance for Optical Cross-Connects in Wavelength Routing Networks --- p.36Chapter 4.1 --- Wavelength Routing Networks --- p.37Chapter 4.2 --- Options in Fault Surveillance --- p.39Chapter 4.3 --- Optical Path Surveillance of Optical Cross-Connects in Wavelength Routing Networks --- p.41Chapter 4.3.1 --- Scanning Amplified Spontaneous Emission Identification Surveillance Scheme --- p.43Chapter 4.3.2 --- Pilot-Tone Based Surveillance and Removal Scheme --- p.49Chapter 4.4 --- Summary --- p.55Chapter 5 --- Conclusion --- p.57Chapter 5.1 --- Summary of the Thesis --- p.57Chapter 5.2 --- Future Work --- p.60Bibliography --- p.61Publication List --- p.5

Cross-Layer Platform for Dynamic, Energy-Efficient Optical Networks

The design of the next-generation Internet infrastructure is driven by the need to sustain the massive growth in bandwidth demands. Novel, energy-efficient, optical networking technologies and architectures are required to effectively meet the stringent performance requirements with low cost and ultrahigh energy efficiencies. In this thesis, a cross-layer communications platform is proposed to enable greater intelligence and functionality on the physical layer. Providing the optical layer with advanced networking capabilities will facilitate the dynamic management and optimization of optical switching based on performance monitoring measurements and higher-layer attributes. The cross-layer platform aims to create a new framework for networks to incorporate packet-scale measurement subsystems and techniques for monitoring the health of the optical channel. This will allow for quality-of-service- and energy-aware routing schemes, as well as an enhanced awareness of the optical data signals. This thesis first presents the design and development of an optical packet switching fabric. Leveraging a networking test-bed environment to validate networking hypotheses, advanced switching functionalities are demonstrated, including the support for quality-of-service based routing and packet multicasting. The investigated cross-layering is based on emerging optical technologies, enabling packet protection techniques and packet-rate switching fabric reconfiguration. Coupled with fast performance monitoring, the platform will achieve significant performance gains within the endeavor of all-optical switching. Allowing for a more intelligent, programmable optical layer aims to support greater flexibility with respect to bandwidth allocation and potentially a significant reduction in the network's energy consumption. The ultimate deliverable of this work is a high-performance, cross-layer enabled optical network node. The experimental demonstration of an initial prototype creates a dynamic network element with distributed control plane management, featuring fast packet-rate optical switching capabilities and embedded physical-layer performance monitoring modules. The cross-layer box enables an intelligent traffic delivery system that can dynamically manipulate optical switching on a packet-granular scale. With the goal of achieving advanced multi-layer routing and control algorithms, the network node requires an intelligent co-optimization across all the layers. The proposed cross-layer design should drive optical technologies and architectures in an innovative way, in order to fulfill the void between the design of basic photonic devices and the networking protocols that use them. The performance of the entire network -- from the optical components, to the routing algorithms and user applications -- should be optimized in concert. This contribution to the area of cross-layer network design creates an adaptable optical pipe that is extremely flexible and intelligent aware of both the physical optical signals and higher-layer requirements. The impact of this work will be seen in the realization of dynamic, energy-efficient optical communication links in future networking infrastructures

Performance analysis of packet switched all-optical networks

All-optical packet switching has been intensively investigated in recent years as an alternative to static, crossconnect based networks. Several switch architectures have been proposed, all of them using buffers made of fibre delay lines. The paper addresses the basic concepts of packet switching in the optical domain and describes an analytical approach to evaluate the end-to-end performance of networks employing slotted (fixed length) optical packets. Thus, for a given topology and traffic matrix, the end-to-end cell loss ratio is computed assuming an uncorrelated traffic. A network dimensioning procedure relying on this approach is also presented

Quantum Key Distribution

This chapter describes the application of lasers, specifically diode lasers, in the area of quantum key distribution (QKD). First, we motivate the distribution of cryptographic keys based on quantum physical properties of light, give a brief introduction to QKD assuming the reader has no or very little knowledge about cryptography, and briefly present the state-of-the-art of QKD. In the second half of the chapter we describe, as an example of a real-world QKD system, the system deployed between the University of Calgary and SAIT Polytechnic. We conclude the chapter with a brief discussion of quantum networks and future steps.Comment: 20 pages, 12 figure