Loss-resilient Coding of Texture and Depth for Free-viewpoint Video Conferencing

Free-viewpoint video conferencing allows a participant to observe the remote 3D scene from any freely chosen viewpoint. An intermediate virtual viewpoint image is commonly synthesized using two pairs of transmitted texture and depth maps from two neighboring captured viewpoints via depth-image-based rendering (DIBR). To maintain high quality of synthesized images, it is imperative to contain the adverse effects of network packet losses that may arise during texture and depth video transmission. Towards this end, we develop an integrated approach that exploits the representation redundancy inherent in the multiple streamed videos a voxel in the 3D scene visible to two captured views is sampled and coded twice in the two views. In particular, at the receiver we first develop an error concealment strategy that adaptively blends corresponding pixels in the two captured views during DIBR, so that pixels from the more reliable transmitted view are weighted more heavily. We then couple it with a sender-side optimization of reference picture selection (RPS) during real-time video coding, so that blocks containing samples of voxels that are visible in both views are more error-resiliently coded in one view only, given adaptive blending will erase errors in the other view. Further, synthesized view distortion sensitivities to texture versus depth errors are analyzed, so that relative importance of texture and depth code blocks can be computed for system-wide RPS optimization. Experimental results show that the proposed scheme can outperform the use of a traditional feedback channel by up to 0.82 dB on average at 8% packet loss rate, and by as much as 3 dB for particular frames

Subjective quality assessment of error concealment strategies for 3DTV in the presence of asymmetric transmission errors

International audienceThe transmission of 3DTV sequences over packet based networks may result in degradations of the video quality due to packet loss. In the conventional 2D case, several different strategies are known for extrapolating the missing information and thus concealing the error. In 3D however, the residual error after concealment of one view might leads to binocular rivalry with the correctly received second view. In this paper, three simple alternatives are presented: frame freezing, a reduced playback speed, and displaying only a single view for both eyes, thus effectively switching to 2D presentation. In a subjective experiment the performance in terms of quality of experience of the three methods is evaluated for different packet loss scenarios. Error-free encoded videos at different bit rates have been included as anchor conditions. The subjective experiment method contains special precautions for measuring the Quality of Experience (QoE) for 3D content and also contains an indicator for visual discomfort. The results indicate that switching to 2D is currently the best choice but difficulties with visual discomfort should be expected even for this method

Providing 3D video services: the challenge from 2D to 3DTV quality of experience

Recently, three-dimensional (3D) video has decisively burst onto the entertainment industry scene, and has arrived in households even before the standardization process has been completed. 3D television (3DTV) adoption and deployment can be seen as a major leap in television history, similar to previous transitions from black and white (B&W) to color, from analog to digital television (TV), and from standard definition to high definition. In this paper, we analyze current 3D video technology trends in order to define a taxonomy of the availability and possible introduction of 3D-based services. We also propose an audiovisual network services architecture which provides a smooth transition from two-dimensional (2D) to 3DTV in an Internet Protocol (IP)-based scenario. Based on subjective assessment tests, we also analyze those factors which will influence the quality of experience in those 3D video services, focusing on effects of both coding and transmission errors. In addition, examples of the application of the architecture and results of assessment tests are provided

3D video coding and transmission

The capture, transmission, and display of 3D content has gained a lot of attention in the last few years. 3D multimedia content is no longer con fined to cinema theatres but is being transmitted using stereoscopic video over satellite, shared on Blu-RayTMdisks, or sent over Internet technologies. Stereoscopic displays are needed at the receiving end and the viewer needs to wear special glasses to present the two versions of the video to the human vision system that then generates the 3D illusion. To be more e ffective and improve the immersive experience, more views are acquired from a larger number of cameras and presented on di fferent displays, such as autostereoscopic and light field displays. These multiple views, combined with depth data, also allow enhanced user experiences and new forms of interaction with the 3D content from virtual viewpoints. This type of audiovisual information is represented by a huge amount of data that needs to be compressed and transmitted over bandwidth-limited channels. Part of the COST Action IC1105 \3D Content Creation, Coding and Transmission over Future Media Networks" (3DConTourNet) focuses on this research challenge.peer-reviewe

QoE Enhancement for Stereoscopic 3DVideo Quality Based on Depth and Color Transmission over IP Networks: A Review

In this review paper we focus on the enhancement of Quality of Experience (QoE) for stereoscopic 3D video based on depth information. We focus on stereoscopic video format because it takes less bandwidth than other format when 3D video is transmitted over an error channel but it is easily affected by the network parameters such as packets loss, delay and jitter. The packet loss on 3D video has more impact in the depth information than other 3D video factors such as comfort, motion, disparity and discomfort. The packet loss on depth information causes undesired effect on color and depth maps. Therefore, in order to minimize quality degradation, the application of frame loss concealment technique is preferred. This technique is expected to improve the QoE for end users. In this paper we will also review 3D video factors and their challenges, methods of measuring the QOE, algorithms used for packets loss recovery.

Cross-layer Optimized Wireless Video Surveillance

A wireless video surveillance system contains three major components, the video capture and preprocessing, the video compression and transmission over wireless sensor networks (WSNs), and the video analysis at the receiving end. The coordination of different components is important for improving the end-to-end video quality, especially under the communication resource constraint. Cross-layer control proves to be an efficient measure for optimal system configuration. In this dissertation, we address the problem of implementing cross-layer optimization in the wireless video surveillance system. The thesis work is based on three research projects. In the first project, a single PTU (pan-tilt-unit) camera is used for video object tracking. The problem studied is how to improve the quality of the received video by jointly considering the coding and transmission process. The cross-layer controller determines the optimal coding and transmission parameters, according to the dynamic channel condition and the transmission delay. Multiple error concealment strategies are developed utilizing the special property of the PTU camera motion. In the second project, the binocular PTU camera is adopted for video object tracking. The presented work studied the fast disparity estimation algorithm and the 3D video transcoding over the WSN for real-time applications. The disparity/depth information is estimated in a coarse-to-fine manner using both local and global methods. The transcoding is coordinated by the cross-layer controller based on the channel condition and the data rate constraint, in order to achieve the best view synthesis quality. The third project is applied for multi-camera motion capture in remote healthcare monitoring. The challenge is the resource allocation for multiple video sequences. The presented cross-layer design incorporates the delay sensitive, content-aware video coding and transmission, and the adaptive video coding and transmission to ensure the optimal and balanced quality for the multi-view videos. In these projects, interdisciplinary study is conducted to synergize the surveillance system under the cross-layer optimization framework. Experimental results demonstrate the efficiency of the proposed schemes. The challenges of cross-layer design in existing wireless video surveillance systems are also analyzed to enlighten the future work. Adviser: Song C

Cross-layer Optimized Wireless Video Surveillance

A wireless video surveillance system contains three major components, the video capture and preprocessing, the video compression and transmission over wireless sensor networks (WSNs), and the video analysis at the receiving end. The coordination of different components is important for improving the end-to-end video quality, especially under the communication resource constraint. Cross-layer control proves to be an efficient measure for optimal system configuration. In this dissertation, we address the problem of implementing cross-layer optimization in the wireless video surveillance system. The thesis work is based on three research projects. In the first project, a single PTU (pan-tilt-unit) camera is used for video object tracking. The problem studied is how to improve the quality of the received video by jointly considering the coding and transmission process. The cross-layer controller determines the optimal coding and transmission parameters, according to the dynamic channel condition and the transmission delay. Multiple error concealment strategies are developed utilizing the special property of the PTU camera motion. In the second project, the binocular PTU camera is adopted for video object tracking. The presented work studied the fast disparity estimation algorithm and the 3D video transcoding over the WSN for real-time applications. The disparity/depth information is estimated in a coarse-to-fine manner using both local and global methods. The transcoding is coordinated by the cross-layer controller based on the channel condition and the data rate constraint, in order to achieve the best view synthesis quality. The third project is applied for multi-camera motion capture in remote healthcare monitoring. The challenge is the resource allocation for multiple video sequences. The presented cross-layer design incorporates the delay sensitive, content-aware video coding and transmission, and the adaptive video coding and transmission to ensure the optimal and balanced quality for the multi-view videos. In these projects, interdisciplinary study is conducted to synergize the surveillance system under the cross-layer optimization framework. Experimental results demonstrate the efficiency of the proposed schemes. The challenges of cross-layer design in existing wireless video surveillance systems are also analyzed to enlighten the future work. Adviser: Song C

End-to-end 3D video communication over heterogeneous networks

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Three-dimensional technology, more commonly referred to as 3D technology, has revolutionised many fields including entertainment, medicine, and communications to name a few. In addition to 3D films, games, and sports channels, 3D perception has made tele-medicine a reality. By the year 2015, 30% of the all HD panels at home will be 3D enabled, predicted by consumer electronics manufacturers. Stereoscopic cameras, a comparatively mature technology compared to other 3D systems, are now being used by ordinary citizens to produce 3D content and share at a click of a button just like they do with the 2D counterparts via sites like YouTube. But technical challenges still exist, including with autostereoscopic multiview displays. 3D content requires many complex considerations--including how to represent it, and deciphering what is the best compression format--when considering transmission or storage, because of its increased amount of data. Any decision must be taken in the light of the available bandwidth or storage capacity, quality and user expectations. Free viewpoint navigation also remains partly unsolved. The most pressing issue getting in the way of widespread uptake of consumer 3D systems is the ability to deliver 3D content to heterogeneous consumer displays over the heterogeneous networks. Optimising 3D video communication solutions must consider the entire pipeline, starting with optimisation at the video source to the end display and transmission optimisation. Multi-view offers the most compelling solution for 3D videos with motion parallax and freedom from wearing headgear for 3D video perception. Optimising multi-view video for delivery and display could increase the demand for true 3D in the consumer market. This thesis focuses on an end-to-end quality optimisation in 3D video communication/transmission, offering solutions for optimisation at the compression, transmission, and decoder levels.Brunel University - Isambard Research Scholarshi

Error-resilient multi-view video plus depth based 3-D video coding

Three Dimensional (3-D) video, by definition, is a collection of signals that can provide depth perception of a 3-D scene. With the development of 3-D display technologies and interactive multimedia systems, 3-D video has attracted significant interest from both industries and academia with a variety of applications. In order to provide desired services in various 3-D video applications, the multiview video plus depth (MVD) representation, which can facilitate the generation of virtual views, has been determined to be the best format for 3-D video data. Similar to 2-D video, compressed 3-D video is highly sensitive to transmission errors due to errors propagated from the current frame to the future predicted frames. Moreover, since the virtual views required for auto-stereoscopic displays are rendered from the compressed texture videos and depth maps, transmission errors of the distorted texture videos and depth maps can be further propagated to the virtual views. Besides, the distortions in texture and depth show different effects on the rendering views. Therefore, compared to the reliability of the transmission of the 2-D video, error-resilient texture video and depth map coding are facing major new challenges. This research concentrates on improving the error resilience performance of MVD-based 3-D video in packet loss scenarios. Based on the analysis of the propagating behaviour of transmission errors, a Wyner-Ziv (WZ)-based error-resilient algorithm is first designed for coding of the multi-view video data or depth data. In this scheme, an auxiliary redundant stream encoded according to WZ principle is employed to protect a primary stream encoded with standard multi-view video coding codec. Then, considering the fact that different combinations of texture and depth coding mode will exhibit varying robustness to transmission errors, a rate-distortion optimized mode switching scheme is proposed to strike the optimal trade-off between robustness and compression effciency. In this approach, the texture and depth modes are jointly optimized by minimizing the overall distortion of both the coded and synthesized views subject to a given bit rate. Finally, this study extends the research on the reliable transmission of view synthesis prediction (VSP)-based 3-D video. In order to mitigate the prediction position error caused by packet losses in the depth map, a novel disparity vector correction algorithm is developed, where the corrected disparity vector is calculated from the depth error. To facilitate decoder error concealment, the depth error is recursively estimated at the decoder. The contributions of this dissertation are multifold. First, the proposed WZbased error-resilient algorithm can accurately characterize the effect of transmission error on multi-view distortion at the transform domain in consideration of both temporal and inter-view error propagation, and based on the estimated distortion, this algorithm can perform optimal WZ bit allocation at the encoder through explicitly developing a sophisticated rate allocation strategy. This proposed algorithm is able to provide a finer granularity in performing rate adaptivity and unequal error protection for multi-view data, not only at the frame level, but also at the bit-plane level. Secondly, in the proposed mode switching scheme, a new analytic model is formulated to optimally estimate the view synthesis distortion due to packet losses, in which the compound impact of the transmission distortions of both the texture video and the depth map on the quality of the synthesized view is mathematically analysed. The accuracy of this view synthesis distortion model is demonstrated via simulation results and, further, the estimated distortion is integrated into a rate-distortion framework for optimal mode switching to achieve substantial performance gains over state-of-the-art algorithms. Last, but not least, this dissertation provides a preliminary investigation of VSP-based 3-D video over unreliable channel. In the proposed disparity vector correction algorithm, the pixel-level depth map error can be precisely estimated at the decoder without the deterministic knowledge of the error-free reconstructed depth. The approximation of the innovation term involved in depth error estimation is proved theoretically. This algorithm is very useful to conceal the position-erroneous pixels whose disparity vectors are correctly received