Resilient networking in wireless sensor networks

This report deals with security in wireless sensor networks (WSNs), especially in network layer. Multiple secure routing protocols have been proposed in the literature. However, they often use the cryptography to secure routing functionalities. The cryptography alone is not enough to defend against multiple attacks due to the node compromise. Therefore, we need more algorithmic solutions. In this report, we focus on the behavior of routing protocols to determine which properties make them more resilient to attacks. Our aim is to find some answers to the following questions. Are there any existing protocols, not designed initially for security, but which already contain some inherently resilient properties against attacks under which some portion of the network nodes is compromised? If yes, which specific behaviors are making these protocols more resilient? We propose in this report an overview of security strategies for WSNs in general, including existing attacks and defensive measures. In this report we focus at the network layer in particular, and an analysis of the behavior of four particular routing protocols is provided to determine their inherent resiliency to insider attacks. The protocols considered are: Dynamic Source Routing (DSR), Gradient-Based Routing (GBR), Greedy Forwarding (GF) and Random Walk Routing (RWR)

Secure Multi-Path Selection with Optimal Controller Placement Using Hybrid Software-Defined Networks with Optimization Algorithm

The Internet's growth in popularity requires computer networks for both agility and resilience. Recently, unable to satisfy the computer needs for traditional networking systems. Software Defined Networking (SDN) is known as a paradigm shift in the networking industry. Many organizations are used SDN due to their efficiency of transmission. Striking the right balance between SDN and legacy switching capabilities will enable successful network scenarios in architecture networks. Therefore, this object grand scenario for a hybrid network where the external perimeter transport device is replaced with an SDN device in the service provider network. With the moving away from older networks to SDN, hybrid SDN includes both legacy and SDN switches. Existing models of SDN have limitations such as overfitting, local optimal trapping, and poor path selection efficiency. This paper proposed a Deep Kronecker Neural Network (DKNN) to improve its efficiency with a moderate optimization method for multipath selection in SDN. Dynamic resource scheduling is used for the reward function the learning performance is improved by the deep reinforcement learning (DRL) technique. The controller for centralised SDN acts as a network brain in the control plane. Among the most important duties network is selected for the best SDN controller. It is vulnerable to invasions and the controller becomes a network bottleneck. This study presents an intrusion detection system (IDS) based on the SDN model that runs as an application module within the controller. Therefore, this study suggested the feature extraction and classification of contractive auto-encoder with a triple attention-based classifier. Additionally, this study leveraged the best performing SDN controllers on which many other SDN controllers are based on OpenDayLight (ODL) provides an open northbound API and supports multiple southbound protocols. Therefore, one of the main issues in the multi-controller placement problem (CPP) that addresses needed in the setting of SDN specifically when different aspects in interruption, ability, authenticity and load distribution are being considered. Introducing the scenario concept, CPP is formulated as a robust optimization problem that considers changes in network status due to power outages, controller’s capacity, load fluctuations and changes in switches demand. Therefore, to improve network performance, it is planned to improve the optimal amount of controller placements by simulated annealing using different topologies the modified Dragonfly optimization algorithm (MDOA)

TORKAMELEON. IMPROVING TOR’S CENSORSHIP RESISTANCE WITH K-ANONYMIZATION MEDIA MORPHING COVERT INPUT CHANNELS

Anonymity networks such as Tor and other related tools are powerful means of increas- ing the anonymity and privacy of Internet users’ communications. Tor is currently the most widely used solution by whistleblowers to disclose confidential information and denounce censorship measures, including violations of civil rights, freedom of expres- sion, or guarantees of free access to information. However, recent research studies have shown that Tor is vulnerable to so-called powerful correlation attacks carried out by global adversaries or collaborative Internet censorship parties. In the Tor ”arms race” scenario, we can see that as new censorship, surveillance, and deep correlation tools have been researched, new, improved solutions for preserving anonymity have also emerged. In recent research proposals, unobservable encapsulation of IP packets in covert media channels is one of the most promising defenses against such threat models. They leverage WebRTC-based covert channels as a robust and practical approach against powerful traf- fic correlation analysis. At the same time, these solutions are difficult to combat through the traffic-blocking measures commonly used by censorship authorities. In this dissertation, we propose TorKameleon, a censorship evasion solution de- signed to protect Tor users with increased censorship resistance against powerful traffic correlation attacks executed by global adversaries. The system is based on flexible K- anonymization input circuits that can support TLS tunneling and WebRTC-based covert channels before forwarding users’ original input traffic to the Tor network. Our goal is to protect users from machine and deep learning correlation attacks between incom- ing user traffic and observed traffic at different Tor network relays, such as middle and egress relays. TorKameleon is the first system to implement a Tor pluggable transport based on parameterizable TLS tunneling and WebRTC-based covert channels. We have implemented the TorKameleon prototype and performed extensive validations to ob- serve the correctness and experimental performance of the proposed solution in the Tor environment. With these evaluations, we analyze the necessary tradeoffs between the performance of the standard Tor network and the achieved effectiveness and performance of TorKameleon, capable of preserving the required unobservability properties.Redes de anonimização como o Tor e soluções ou ferramentas semelhantes são meios poderosos de aumentar a anonimidade e a privacidade das comunicações de utilizadores da Internet . O Tor é atualmente a rede de anonimato mais utilizada por delatores para divulgar informações confidenciais e denunciar medidas de censura tais como violações de direitos civis e da liberdade de expressão, ou falhas nas garantias de livre acesso à informação. No entanto, estudos recentes mostram que o Tor é vulnerável a adversários globais ou a entidades que colaboram entre si para garantir a censura online. Neste cenário competitivo e de jogo do “gato e do rato”, é possível verificar que à medida que novas soluções de censura e vigilância são investigadas, novos sistemas melhorados para a preservação de anonimato são também apresentados e refinados. O encapsulamento de pacotes IP em túneis encapsulados em protocolos de media são uma das mais promissoras soluções contra os novos modelos de ataque à anonimidade. Estas soluções alavancam canais encobertos em protocolos de media baseados em WebRTC para resistir a poderosos ataques de correlação de tráfego e a medidas de bloqueios normalmente usadas pelos censores. Nesta dissertação propomos o TorKameleon, uma solução desenhada para protoger os utilizadores da rede Tor contra os mais recentes ataques de correlação feitos por um modelo de adversário global. O sistema é baseado em estratégias de anonimização e reencaminhamento do tráfego do utilizador através de K nós, utilizando também encap- sulamento do tráfego em canais encobertos em túneis TLS ou WebRTC. O nosso objetivo é proteger os utilizadores da rede Tor de ataques de correlação implementados através de modelos de aprendizagem automática feitos entre o tráfego do utilizador que entra na rede Tor e esse mesmo tráfego noutro segmento da rede, como por exemplo nos nós de saída da rede. O TorKameleon é o primeiro sistema a implementar um Tor pluggable transport parametrizável, baseado em túneis TLS ou em canais encobertos em protocolos media. Implementamos um protótipo do sistema e realizamos uma extensa avalição expe- rimental, inserindo a solução no ambiente da rede Tor. Com base nestas avaliações, anali- zamos o tradeoff necessário entre a performance da rede Tor e a eficácia e a performance obtida do TorKameleon, que garante as propriedades de preservação de anonimato

A lightweight blockchain based framework for underwater ioT

The Internet of Things (IoT) has facilitated services without human intervention for a wide range of applications, including underwater monitoring, where sensors are located at various depths, and data must be transmitted to surface base stations for storage and processing. Ensuring that data transmitted across hierarchical sensor networks are kept secure and private without high computational cost remains a challenge. In this paper, we propose a multilevel sensor monitoring architecture. Our proposal includes a layer-based architecture consisting of Fog and Cloud elements to process and store and process the Internet of Underwater Things (IoUT) data securely with customized Blockchain technology. The secure routing of IoUT data through the hierarchical topology ensures the legitimacy of data sources. A security and performance analysis was performed to show that the architecture can collect data from IoUT devices in the monitoring region efficiently and securely. © 2020 by the authors. Licensee MDPI, Basel, Switzerland

End-to-End Resilience Mechanisms for Network Transport Protocols

The universal reliance on and hence the need for resilience in network communications has been well established. Current transport protocols are designed to provide fixed mechanisms for error remediation (if any), using techniques such as ARQ, and offer little or no adaptability to underlying network conditions, or to different sets of application requirements. The ubiquitous TCP transport protocol makes too many assumptions about underlying layers to provide resilient end-to-end service in all network scenarios, especially those which include significant heterogeneity. Additionally the properties of reliability, performability, availability, dependability, and survivability are not explicitly addressed in the design, so there is no support for resilience. This dissertation presents considerations which must be taken in designing new resilience mechanisms for future transport protocols to meet service requirements in the face of various attacks and challenges. The primary mechanisms addressed include diverse end-to-end paths, and multi-mode operation for changing network conditions

Development of a Security-Focused Multi-Channel Communication Protocol and Associated Quality of Secure Service (QoSS) Metrics

The threat of eavesdropping, and the challenge of recognizing and correcting for corrupted or suppressed information in communication systems is a consistent challenge. Effectively managing protection mechanisms requires an ability to accurately gauge the likelihood or severity of a threat, and adapt the security features available in a system to mitigate the threat. This research focuses on the design and development of a security-focused communication protocol at the session-layer based on a re-prioritized communication architecture model and associated metrics. From a probabilistic model that considers data leakage and data corruption as surrogates for breaches of confidentiality and integrity, a set of metrics allows the direct and repeatable quantification of the security available in single- or multi-channel networks. The quantification of security is based directly upon the probabilities that adversarial listeners and malicious disruptors are able to gain access to or change the original message. Fragmenting data across multiple channels demonstrates potential improvements to confidentiality, while duplication improves the integrity of the data against disruptions. Finally, the model and metrics are exercised in simulation. The ultimate goal is to minimize the information available to adversaries

Intrusion detection in IPv6-enabled sensor networks.

In this research, we study efficient and lightweight Intrusion Detection Systems (IDS) for ad-hoc networks through the lens of IPv6-enabled Wireless Sensor Actuator Networks. These networks consist of highly constrained devices able to communicate wirelessly in an ad-hoc fashion, thus following the architecture of ad-hoc networks. Current state of the art IDS in IoT and WSNs have been developed considering the architecture of conventional computer networks, and as such they do not efficiently address the paradigm of ad-hoc networks, which is highly relevant in emerging network paradigms, such as the Internet of Things (IoT). In this context, the network properties of resilience and redundancy have not been extensively studied. In this thesis, we first identify a trade-off between the communication and energy overheads of an IDS (as captured by the number of active IDS agents in the network) and the performance of the system in terms of successfully identifying attacks. In order to fine-tune this trade-off, we model networks as Random Geometric Graphs; these are a rigorous approach that allows us to capture underlying structural properties of the network. We then introduce a novel IDS architectural approach that consists of a central IDS agent and set of distributed IDS agents deployed uniformly at random over the network area. These nodes are able to efficiently detect attacks at the networking layer in a collaborative manner by monitoring locally available network information provided by IoT routing protocols, such as RPL. The detailed experimental evaluation conducted in this research demonstrates significant performance gains in terms of communication overhead and energy dissipation while maintaining high detection rates. We also show that the performance of our IDS in ad-hoc networks does not rely on the size of the network but on fundamental underling network properties, such as the network topology and the average degree of the nodes. The experiments show that our proposed IDS architecture is resilient against frequent topology changes due to node failures

Smart Wireless Sensor Networks

The recent development of communication and sensor technology results in the growth of a new attractive and challenging area - wireless sensor networks (WSNs). A wireless sensor network which consists of a large number of sensor nodes is deployed in environmental fields to serve various applications. Facilitated with the ability of wireless communication and intelligent computation, these nodes become smart sensors which do not only perceive ambient physical parameters but also be able to process information, cooperate with each other and self-organize into the network. These new features assist the sensor nodes as well as the network to operate more efficiently in terms of both data acquisition and energy consumption. Special purposes of the applications require design and operation of WSNs different from conventional networks such as the internet. The network design must take into account of the objectives of specific applications. The nature of deployed environment must be considered. The limited of sensor nodes� resources such as memory, computational ability, communication bandwidth and energy source are the challenges in network design. A smart wireless sensor network must be able to deal with these constraints as well as to guarantee the connectivity, coverage, reliability and security of network's operation for a maximized lifetime. This book discusses various aspects of designing such smart wireless sensor networks. Main topics includes: design methodologies, network protocols and algorithms, quality of service management, coverage optimization, time synchronization and security techniques for sensor networks

Routing and Mobility on IPv6 over LoWPAN

The IoT means a world-wide network of interconnected objects based on standard communication protocols. An object in this context is a quotidian physical device augmented with sensing/actuating, processing, storing and communication capabilities. These objects must be able to interact with the surrounding environment where they are placed and to cooperate with neighbouring objects in order to accomplish a common objective. The IoT objects have also the capabilities of converting the sensed data into automated instructions and communicating them to other objects through the communication networks, avoiding the human intervention in several tasks. Most of IoT deployments are based on small devices with restricted computational resources and energy constraints. For this reason, initially the scientific community did not consider the use of IP protocol suite in this scenarios because there was the perception that it was too heavy to the available resources on such devices. Meanwhile, the scientific community and the industry started to rethink about the use of IP protocol suite in all IoT devices and now it is considered as the solution to provide connectivity between the IoT devices, independently of the Layer 2 protocol in use, and to connect them to the Internet. Despite the use of IP suite protocol in all devices and the amount of solutions proposed, many open issues remain unsolved in order to reach a seamless integration between the IoT and the Internet and to provide the conditions to IoT service widespread. This thesis addressed the challenges associated with the interconnectivity between the Internet and the IoT devices and with the security aspects of the IoT. In the interconnectivity between the IoT devices and the Internet the problem is how to provide valuable information to the Internet connected devices, independently of the supported IP protocol version, without being necessary accessed directly to the IoT nodes. In order to solve this problem, solutions based on Representational state transfer (REST) web services and IPv4 to IPv6 dual stack transition mechanism were proposed and evaluated. The REST web service and the transition mechanism runs only at the border router without penalizing the IoT constrained devices. The mitigation of the effects of internal and external security attacks minimizing the overhead imposed on the IoT devices is the security challenge addressed in this thesis. Three different solutions were proposed. The first is a mechanism to prevent remotely initiated transport level Denial of Service attacks that avoids the use of inefficient and hard to manage traditional firewalls. It is based on filtering at the border router the traffic received from the Internet and destined to the IoT network according to the conditions announced by each IoT device. The second is a network access security framework that can be used to control the nodes that have access to the network, based on administrative approval, and to enforce security compliance to the authorized nodes. The third is a network admission control framework that prevents IoT unauthorized nodes to communicate with IoT authorized nodes or with the Internet, which drastically reduces the number of possible security attacks. The network admission control was also exploited as a management mechanism as it can be used to manage the network size in terms of number of nodes, making the network more manageable, increasing its reliability and extending its lifetime.A IoT (Internet of Things) tem suscitado o interesse tanto da comunidade académica como da indústria, uma vez que os campos de aplicação são inúmeros assim como os potenciais ganhos que podem ser obtidos através do uso deste tipo de tecnologia. A IoT significa uma rede global de objetos ligados entre si através de uma rede de comunicações baseada em protocolos standard. Neste contexto, um objeto é um objeto físico do dia a dia ao qual foi adicionada a capacidade de medir e de atuar sobre variáveis físicas, de processar e armazenar dados e de comunicar. Estes objetos têm a capacidade de interagir com o meio ambiente envolvente e de cooperar com outros objetos vizinhos de forma a atingirem um objetivo comum. Estes objetos também têm a capacidade de converter os dados lidos em instruções e de as comunicar a outros objetos através da rede de comunicações, evitando desta forma a intervenção humana em diversas tarefas. A maior parte das concretizações de sistemas IoT são baseados em pequenos dispositivos autónomos com restrições ao nível dos recursos computacionais e de retenção de energia. Por esta razão, inicialmente a comunidade científica não considerou adequado o uso da pilha protocolar IP neste tipo de dispositivos, uma vez que havia a perceção de que era muito pesada para os recursos computacionais disponíveis. Entretanto, a comunidade científica e a indústria retomaram a discussão acerca dos benefícios do uso da pilha protocolar em todos os dispositivos da IoT e atualmente é considerada a solução para estabelecer a conetividade entre os dispositivos IoT independentemente do protocolo da camada dois em uso e para os ligar à Internet. Apesar do uso da pilha protocolar IP em todos os dispositivos e da quantidade de soluções propostas, são vários os problemas por resolver no que concerne à integração contínua e sem interrupções da IoT na Internet e de criar as condições para a adoção generalizada deste tipo de tecnologias. Esta tese versa sobre os desafios associados à integração da IoT na Internet e dos aspetos de segurança da IoT. Relativamente à integração da IoT na Internet o problema é como fornecer informação válida aos dispositivos ligados à Internet, independentemente da versão do protocolo IP em uso, evitando o acesso direto aos dispositivos IoT. Para a resolução deste problema foram propostas e avaliadas soluções baseadas em web services REST e em mecanismos de transição IPv4 para IPv6 do tipo pilha dupla (dual stack). O web service e o mecanismo de transição são suportados apenas no router de fronteira, sem penalizar os dispositivos IoT. No que concerne à segurança, o problema é mitigar os efeitos dos ataques de segurança internos e externos iniciados local e remotamente. Foram propostas três soluções diferentes, a primeira é um mecanismo que minimiza os efeitos dos ataques de negação de serviço com origem na Internet e que evita o uso de mecanismos de firewalls ineficientes e de gestão complexa. Este mecanismo filtra no router de fronteira o tráfego com origem na Internet é destinado à IoT de acordo com as condições anunciadas por cada um dos dispositivos IoT da rede. A segunda solução, é uma framework de network admission control que controla quais os dispositivos que podem aceder à rede com base na autorização administrativa e que aplica políticas de conformidade relativas à segurança aos dispositivos autorizados. A terceira é um mecanismo de network admission control para redes 6LoWPAN que evita que dispositivos não autorizados comuniquem com outros dispositivos legítimos e com a Internet o que reduz drasticamente o número de ataques à segurança. Este mecanismo também foi explorado como um mecanismo de gestão uma vez que pode ser utilizado a dimensão da rede quanto ao número de dispositivos, tornando-a mais fácil de gerir e aumentando a sua fiabilidade e o seu tempo de vida