Smart Embedded Passive Acoustic Devices for Real-Time Hydroacoustic Surveys

This paper describes cost-efficient, innovative and interoperable ocean passive acoustics sensors systems, developed within the European FP7 project NeXOS (Next generation Low-Cost Multifunctional Web Enabled Ocean Sensor Systems Empowering Marine, Maritime and Fisheries Management) These passive acoustic sensors consist of two low power, innovative digital hydrophone systems with embedded processing of acoustic data, A1 and A2, enabling real-time measurement of the underwater soundscape. An important part of the effort is focused on achieving greater dynamic range and effortless integration on autonomous platforms, such as gliders and profilers. A1 is a small standalone, compact, low power, low consumption digital hydrophone with embedded pre-processing of acoustic data, suitable for mobile platforms with limited autonomy and communication capability. A2 consists of four A1 digital hydrophones with Ethernet interface and one master unit for data processing, enabling real-time measurement of underwater noise and soundscape sources. In this work the real-time acoustic processing algorithms implemented for A1 and A2 are described, including computational load evaluations of the algorithms. The results obtained from the real time test done with the A2 assembly at OBSEA observatory collected during the verification phase of the project are presented.Postprint (author's final draft

Unattended acoustic sensor systems for noise monitoring in national parks

2017 Spring.Includes bibliographical references.Detection and classification of transient acoustic signals is a difficult problem. The problem is often complicated by factors such as the variety of sources that may be encountered, the presence of strong interference and substantial variations in the acoustic environment. Furthermore, for most applications of transient detection and classification, such as speech recognition and environmental monitoring, online detection and classification of these transient events is required. This is even more crucial for applications such as environmental monitoring as it is often done at remote locations where it is unfeasible to set up a large, general-purpose processing system. Instead, some type of custom-designed system is needed which is power efficient yet able to run the necessary signal processing algorithms in near real-time. In this thesis, we describe a custom-designed environmental monitoring system (EMS) which was specifically designed for monitoring air traffic and other sources of interest in national parks. More specifically, this thesis focuses on the capabilities of the EMS and how transient detection, classification and tracking are implemented on it. The Sparse Coefficient State Tracking (SCST) transient detection and classification algorithm was implemented on the EMS board in order to detect and classify transient events. This algorithm was chosen because it was designed for this particular application and was shown to have superior performance compared to other algorithms commonly used for transient detection and classification. The SCST algorithm was implemented on an Artix 7 FPGA with parts of the algorithm running as dedicated custom logic and other parts running sequentially on a soft-core processor. In this thesis, the partitioning and pipelining of this algorithm is explained. Each of the partitions was tested independently to very their functionality with respect to the overall system. Furthermore, the entire SCST algorithm was tested in the field on actual acoustic data and the performance of this implementation was evaluated using receiver operator characteristic (ROC) curves and confusion matrices. In this test the FPGA implementation of SCST was able to achieve acceptable source detection and classification results despite a difficult data set and limited training data. The tracking of acoustic sources is done through successive direction of arrival (DOA) angle estimation using a wideband extension of the Capon beamforming algorithm. This algorithm was also implemented on the EMS in order to provide real-time DOA estimates for the detected sources. This algorithm was partitioned into several stages with some stages implemented in custom logic while others were implemented as software running on the soft-core processor. Just as with SCST, each partition of this beamforming algorithm was verified independently and then a full system test was conducted to evaluate whether it would be able to track an airborne source. For the full system test, a model airplane was flown at various trajectories relative to the EMS and the trajectories estimated by the system were compared to the ground truth. Although in this test the accuracy of the DOA estimates could not be evaluated, it was show that the algorithm was able to approximately form the general trajectory of a moving source which is sufficient for our application as only a general heading of the acoustic sources is desired

Low-Power and Programmable Analog Circuitry for Wireless Sensors

Embedding networks of secure, wirelessly-connected sensors and actuators will help us to conscientiously manage our local and extended environments. One major challenge for this vision is to create networks of wireless sensor devices that provide maximal knowledge of their environment while using only the energy that is available within that environment. In this work, it is argued that the energy constraints in wireless sensor design are best addressed by incorporating analog signal processors. The low power-consumption of an analog signal processor allows persistent monitoring of multiple sensors while the device\u27s analog-to-digital converter, microcontroller, and transceiver are all in sleep mode. This dissertation describes the development of analog signal processing integrated circuits for wireless sensor networks. Specific technology problems that are addressed include reconfigurable processing architectures for low-power sensing applications, as well as the development of reprogrammable biasing for analog circuits

Low-Power and Programmable Analog Circuitry for Wireless Sensors

Embedding networks of secure, wirelessly-connected sensors and actuators will help us to conscientiously manage our local and extended environments. One major challenge for this vision is to create networks of wireless sensor devices that provide maximal knowledge of their environment while using only the energy that is available within that environment. In this work, it is argued that the energy constraints in wireless sensor design are best addressed by incorporating analog signal processors. The low power-consumption of an analog signal processor allows persistent monitoring of multiple sensors while the device\u27s analog-to-digital converter, microcontroller, and transceiver are all in sleep mode. This dissertation describes the development of analog signal processing integrated circuits for wireless sensor networks. Specific technology problems that are addressed include reconfigurable processing architectures for low-power sensing applications, as well as the development of reprogrammable biasing for analog circuits

Personal Sound Zones by Subband Filtering and Time Domain Optimization

[EN] Personal Sound Zones (PSZ) systems aim to render independent sound signals to multiple listeners within a room by using arrays of loudspeakers. One of the algorithms used to provide PSZ is Weighted Pressure Matching (wPM), which computes the filters required to render a desired response in the listening zones while reducing the acoustic energy arriving to the quiet zones. This algorithm can be formulated in time and frequency domains. In general, the time-domain formulation (wPM-TD) can obtain good performance with shorter filters and delays than the frequency-domain formulation (wPM-FD). However, wPM-TD requires higher computation for obtaining the optimal filters. In this article, we propose a novel approach to the wPM algorithm named Weighted Pressure Matching with Subband Decomposition (wPMSD), which formulates an independent time-domain optimization problem for each of the subbands of a Generalized Discrete Fourier Transform (GDFT) filter bank. Solving the optimization independently for each subband has two main advantages: 1) lower computational complexity than wPM-TD to compute the optimal filters; 2) higher versatility than the classic wPM algorithms, as it allows different configurations (sets of loudspeakers, filter lengths, etc.) in each subband. Moreover, filtering the input signals with a GDFT filter bank (as in wPM-SD) requires lower computational effort than broadband filtering (as in wPM-TD and wPM-FD), which is beneficial for practical PSZ systems. We present experimental evaluations showing that wPM-SD offers very similar performance to wPM-TD. In addition, two cases where the versatility of wPM-SD is beneficial for a PSZ system are presented and experimentally validated.This work was supported by Grants RTI2018-098085-B-C41 (MCIU/AEI/FEDER, UE), RED2018-102668-T and PROMETEO/2019/109. The work of Vicent Moles-Cases has been supported by Spanish Ministry of Education under Grant FPU17/01288.Molés-Cases, V.; Piñero, G.; Diego Antón, MD.; Gonzalez, A. (2020). Personal Sound Zones by Subband Filtering and Time Domain Optimization. IEEE/ACM Transactions on Audio Speech and Language Processing. 28:2684-2696. https://doi.org/10.1109/TASLP.2020.3023628S268426962

Advances in Front-end Enabling Technologies for Thermal Infrared ‘THz Torch’ Wireless Communications

The thermal (emitted) infrared frequency bands (typically 20-40 THz and 60-100 THz) are best known for remote sensing applications that include temperature measurement (e.g., noncontacting thermometers and thermography), night vision and surveillance (e.g., ubiquitous motion sensing and target acquisition). This unregulated part of the electromagnetic spectrum also offers commercial opportunities for the development of short-range secure communications. The ‘THz Torch’ concept, which fundamentally exploits engineered blackbody radiation by partitioning thermally-generated spectral radiance into pre-defined frequency channels, was recently demonstrated by the authors. The thermal radiation within each channel can be independently pulsemodulated, transmitted and detected, to create a robust form of short-range secure communications within the thermal infrared. In this paper, recent progress in the front-end enabling technologies associated with the ‘THz Torch’ concept is reported. Fundamental limitations of this technology are discussed; possible engineering solutions for further improving the performance of such thermalbased wireless links are proposed and verified either experimentally or through numerical simulations. By exploring a raft of enabling technologies, significant enhancements to both data rate and transmission range can be expected. With good engineering solutions, the ‘THz Torch’ concept can exploit 19th century physics with 20th century multiplexing schemes for low-cost 21st century ubiquitous applications in security and defence

Transceiver architectures and sub-mW fast frequency-hopping synthesizers for ultra-low power WSNs

Wireless sensor networks (WSN) have the potential to become the third wireless revolution after wireless voice networks in the 80s and wireless data networks in the late 90s. This revolution will finally connect together the physical world of the human and the virtual world of the electronic devices. Though in the recent years large progress in power consumption reduction has been made in the wireless arena in order to increase the battery life, this is still not enough to achieve a wide adoption of this technology. Indeed, while nowadays consumers are used to charge batteries in laptops, mobile phones and other high-tech products, this operation becomes infeasible when scaled up to large industrial, enterprise or home networks composed of thousands of wireless nodes. Wireless sensor networks come as a new way to connect electronic equipments reducing, in this way, the costs associated with the installation and maintenance of large wired networks. To accomplish this task, it is necessary to reduce the energy consumption of the wireless node to a point where energy harvesting becomes feasible and the node energy autonomy exceeds the life time of the wireless node itself. This thesis focuses on the radio design, which is the backbone of any wireless node. A common approach to radio design for WSNs is to start from a very simple radio (like an RFID) adding more functionalities up to the point in which the power budget is reached. In this way, the robustness of the wireless link is traded off for power reducing the range of applications that can draw benefit form a WSN. In this thesis, we propose a novel approach to the radio design for WSNs. We started from a proven architecture like Bluetooth, and progressively we removed all the functionalities that are not required for WSNs. The robustness of the wireless link is guaranteed by using a fast frequency hopping spread spectrum technique while the power budget is achieved by optimizing the radio architecture and the frequency hopping synthesizer Two different radio architectures and a novel fast frequency hopping synthesizer are proposed that cover the large space of applications for WSNs. The two architectures make use of the peculiarities of each scenario and, together with a novel fast frequency hopping synthesizer, proved that spread spectrum techniques can be used also in severely power constrained scenarios like WSNs. This solution opens a new window toward a radio design, which ultimately trades off flexibility, rather than robustness, for power consumption. In this way, we broadened the range of applications for WSNs to areas in which security and reliability of the communication link are mandatory

Wavelet Theory

The wavelet is a powerful mathematical tool that plays an important role in science and technology. This book looks at some of the most creative and popular applications of wavelets including biomedical signal processing, image processing, communication signal processing, Internet of Things (IoT), acoustical signal processing, financial market data analysis, energy and power management, and COVID-19 pandemic measurements and calculations. The editor’s personal interest is the application of wavelet transform to identify time domain changes on signals and corresponding frequency components and in improving power amplifier behavior

Electron-proton spectrometer design summary

The electron-proton spectrometer (EPS) will be placed aboard the Skylab in order to provide data from which electron and proton radiation dose can be determined. The EPS has five sensors, each consisting of a shielded silicon detector. These provide four integral electron channels and five integral proton channels from which can be deduced four differential proton increments