The kinematic analysis of the third class mechanism

It is necessary to make link mechanisms calculation to the strength at designing of flat link mechanisms of high class after definition of block diagrams and link linear sizes i.e. it is rationally to choose their forms and to determine the section sizes. The algorithm of the definition of dimension of link mechanism lengths of high classes (MHC) and their metric parameters at successive approach is offered in this work

ReSCon '10, Research Student Conference: Book of Abstracts

The third SED Research Student Conference (ReSCon2010) was hosted over three days, 21-23 June 2010, in the Hamilton Centre at Brunel University. The conference consisted of oral and poster presentations, which showcased the high quality and diversity of the research being conducted within the School of Engineering and Design. The abstracts and presentations were the result of ongoing research by postgraduate research students from the School. The conference is held annually, and ReSCon plays a key role in contributing to research and innovations within the School

Distributed sensing in flexible robotic fins: propulsive force prediction and underwater contact sensing

There is recent biological evidence that the pectoral fins of bluegill sunfish are innervated with nerves that respond to bending, and these fish contact obstacles with their fins. However, it is not known how fin-intrinsic sensing could be used to mediate propulsion and touch in engineered fins. The objective of this thesis is to understand the use of distributed sensing in robotic fins, inspired by bony fish fins, for the prediction of propulsive forces and for the discrimination between fluidic loading and contact loading during underwater touch. The research integrates engineering and biology and builds an understanding of fin-intrinsic sensing through study of swimming fish and robotic models of fish fins and sensors. Multiple studies identify which sensor types, sensor placement locations, and model conditions are best for predicting fin propulsive forces and for predicting the state of contact. Comparisons are made between linear and nonlinear Volterra-series convolution models to represent the mapping from sensory data to forces. Best practices for instrumentation and model selection are extracted for a broad range of swimming conditions on a complex, multi-DOF, flexible fin. This knowledge will guide the development of multi-functional systems to navigate and propel through complex, occluded, underwater environments and for sensing and responding to environmental perturbations and obstacles.Ph.D., Mechanical Engineering and Mechanics -- Drexel University, 201

Humanoid Robots

For many years, the human being has been trying, in all ways, to recreate the complex mechanisms that form the human body. Such task is extremely complicated and the results are not totally satisfactory. However, with increasing technological advances based on theoretical and experimental researches, man gets, in a way, to copy or to imitate some systems of the human body. These researches not only intended to create humanoid robots, great part of them constituting autonomous systems, but also, in some way, to offer a higher knowledge of the systems that form the human body, objectifying possible applications in the technology of rehabilitation of human beings, gathering in a whole studies related not only to Robotics, but also to Biomechanics, Biomimmetics, Cybernetics, among other areas. This book presents a series of researches inspired by this ideal, carried through by various researchers worldwide, looking for to analyze and to discuss diverse subjects related to humanoid robots. The presented contributions explore aspects about robotic hands, learning, language, vision and locomotion

Deep Learning Based Upper-limb Motion Estimation Using Surface Electromyography

To advance human-machine interfaces (HMI) that can help disabled people reconstruct lost functions of upper-limbs, machine learning (ML) techniques, particularly classification-based pattern recognition (PR), have been extensively implemented to decode human movement intentions from surface electromyography (sEMG) signals. However, performances of ML can be substantially affected, or even limited, by feature engineering that requires expertise in both domain knowledge and experimental experience. To overcome this limitation, researchers are now focusing on deep learning (DL) techniques to derive informative, representative, and transferable features from raw data automatically. Despite some progress reported in recent literature, it is still very challenging to achieve reliable and robust interpretation of user intentions in practical scenarios. This is mainly because of the high complexity of upper-limb motions and the non-stable characteristics of sEMG signals. Besides, the PR scheme only identifies discrete states of motion. To complete coordinated tasks such as grasping, users have to rely on a sequential on/off control of each individual function, which is inherently different from the simultaneous and proportional control (SPC) strategy adopted by the natural motions of upper-limbs. The aim of this thesis is to develop and advance several DL techniques for the estimation of upper-limb motions from sEMG, and the work is centred on three themes: 1) to improve the reliability of gesture recognition by rejecting uncertain classification outcomes; 2) to build regression frameworks for joint kinematics estimation that enables SPC; and 3) to reduce the degradation of estimation performances when DL model is applied to a new individual. In order to achieve these objectives, the following efforts were made: 1) a confidence model was designed to predict the possibility of correctness with regard to each classification of convolutional neural networks (CNN), such that the uncertain recognition can be identified and rejected; 2) a hybrid framework using CNN for deep feature extraction and long short-term memory neural network (LSTM) was constructed to conduct sequence regression, which could simultaneously exploit the temporal and spatial information in sEMG data; 3) the hybrid framework was further extended by integrating Kalman filter with LSTM units in the recursive learning process, obtaining a deep Kalman filter network (DKFN) to perform kinematics estimation more effectively; and 4) a novel regression scheme was proposed for supervised domain adaptation (SDA), based on which the model generalisation among subjects can be substantially enhanced

Towards the development of safe, collaborative robotic freehand ultrasound

The use of robotics in medicine is of growing importance for modern health services, as robotic systems have the capacity to improve upon human tasks, thereby enhancing the treatment ability of a healthcare provider. In the medical sector, ultrasound imaging is an inexpensive approach without the high radiation emissions often associated with other modalities, especially when compared to MRI and CT imaging respectively. Over the past two decades, considerable effort has been invested into freehand ultrasound robotics research and development. However, this research has focused on the feasibility of the application, not the robotic fundamentals, such as motion control, calibration, and contextual awareness. Instead, much of the work is concentrated on custom designed robots, ultrasound image generation and visual servoing, or teleoperation. Research based on these topics often suffer from important limitations that impede their use in an adaptable, scalable, and real-world manner. Particularly, while custom robots may be designed for a specific application, commercial collaborative robots are a more robust and economical solution. Otherwise, various robotic ultrasound studies have shown the feasibility of using basic force control, but rarely explore controller tuning in the context of patient safety and deformable skin in an unstructured environment. Moreover, many studies evaluate novel visual servoing approaches, but do not consider the practicality of relying on external measurement devices for motion control. These studies neglect the importance of robot accuracy and calibration, which allow a system to safely navigate its environment while reducing the imaging errors associated with positioning. Hence, while the feasibility of robotic ultrasound has been the focal point in previous studies, there is a lack of attention to what occurs between system design and image output. This thesis addresses limitations of the current literature through three distinct contributions. Given the force-controlled nature of an ultrasound robot, the first contribution presents a closed-loop calibration approach using impedance control and low-cost equipment. Accuracy is a fundamental requirement for high-quality ultrasound image generation and targeting. This is especially true when following a specified path along a patient or synthesizing 2D slices into a 3D ultrasound image. However, even though most industrial robots are inherently precise, they are not necessarily accurate. While robot calibration itself has been extensively studied, many of the approaches rely on expensive and highly delicate equipment. Experimental testing showed that this method is comparable in quality to traditional calibration using a laser tracker. As demonstrated through an experimental study and validated with a laser tracker, the absolute accuracy of a collaborative robot was improved to a maximum error of 0.990mm, representing a 58.4% improvement when compared to the nominal model. The second contribution explores collisions and contact events, as they are a natural by-product of applications involving physical human-robot interaction (pHRI) in unstructured environments. Robot-assisted medical ultrasound is an example of a task where simply stopping the robot upon contact detection may not be an appropriate reaction strategy. Thus, the robot should have an awareness of body contact location to properly plan force-controlled trajectories along the human body using the imaging probe. This is especially true for remote ultrasound systems where safety and manipulability are important elements to consider when operating a remote medical system through a communication network. A framework is proposed for robot contact classification using the built-in sensor data of a collaborative robot. Unlike previous studies, this classification does not discern between intended vs. unintended contact scenarios, but rather classifies what was involved in the contact event. The classifier can discern different ISO/TS 15066:2016 specific body areas along a human-model leg with 89.37% accuracy. Altogether, this contact distinction framework allows for more complex reaction strategies and tailored robot behaviour during pHRI. Lastly, given that the success of an ultrasound task depends on the capability of the robot system to handle pHRI, pure motion control is insufficient. Force control techniques are necessary to achieve effective and adaptable behaviour of a robotic system in the unstructured ultrasound environment while also ensuring safe pHRI. While force control does not require explicit knowledge of the environment, to achieve an acceptable dynamic behaviour, the control parameters must be tuned. The third contribution proposes a simple and effective online tuning framework for force-based robotic freehand ultrasound motion control. Within the context of medical ultrasound, different human body locations have a different stiffness and will require unique tunings. Through real-world experiments with a collaborative robot, the framework tuned motion control for optimal and safe trajectories along a human leg phantom. The optimization process was able to successfully reduce the mean absolute error (MAE) of the motion contact force to 0.537N through the evolution of eight motion control parameters. Furthermore, contextual awareness through motion classification can offer a framework for pHRI optimization and safety through predictive motion behaviour with a future goal of autonomous pHRI. As such, a classification pipeline, trained using the tuning process motion data, was able to reliably classify the future force tracking quality of a motion session with an accuracy of 91.82 %

Phantom-Mobility-Based Prosthesis Control in Transhumeral Amputees Without Surgical Reinnervation: A Preliminary Study

Transhumeral amputees face substantial difficulties in efficiently controlling their prosthetic limb, leading to a high rate of rejection of these devices. Actual myoelectric control approaches make their use slow, sequential and unnatural, especially for these patients with a high level of amputation who need a prosthesis with numerous active degrees of freedom (powered elbow, wrist, and hand). While surgical muscle-reinnervation is becoming a generic solution for amputees to increase their control capabilities over a prosthesis, research is still being conducted on the possibility of using the surface myoelectric patterns specifically associated to voluntary Phantom Limb Mobilization (PLM), appearing naturally in most upper-limb amputees without requiring specific surgery. The objective of this study was to evaluate the possibility for transhumeral amputees to use a PLM-based control approach to perform more realistic functional grasping tasks. Two transhumeral amputated participants were asked to repetitively grasp one out of three different objects with an unworn eight-active-DoF prosthetic arm and release it in a dedicated drawer. The prosthesis control was based on phantom limb mobilization and myoelectric pattern recognition techniques, using only two repetitions of each PLM to train the classification architecture. The results show that the task could be successfully achieved with rather optimal strategies and joint trajectories, even if the completion time was increased in comparison with the performances obtained by a control group using a simple GUI control, and the control strategies required numerous corrections. While numerous limitations related to robustness of pattern recognition techniques and to the perturbations generated by actual wearing of the prosthesis remain to be solved, these preliminary results encourage further exploration and deeper understanding of the phenomenon of natural residual myoelectric activity related to PLM, since it could possibly be a viable option in some transhumeral amputees to extend their control abilities of functional upper limb prosthetics with multiple active joints without undergoing muscular reinnervation surgery