The GLAS physical inversion method for analysis of HIRS2/MSU sounding data

Goddard Laboratory for Atmospheric Sciences has developed a method to derive atmospheric temperature profiles, sea or land surface temperatures, sea ice extent and snow cover, and cloud heights and fractional cloud, from HIRS2/MSU radiance data. Chapter 1 describes the physics used in the radiative transfer calculations and demonstrates the accuracy of the calculations. Chapter 2 describes the rapid transmittance algorithm used and demonstrates its accuracy. Chapter 3 describes the theory and application of the techniques used to analyze the satellite data. Chapter 4 shows results obtained for January 1979

Combining visible and infrared radiometry and lidar data to test simulations in clear and ice cloud conditions

Measurements taken during the 2003 Pacific THORPEX Observing System Test (P-TOST) by the MODIS Airborne Simulator (MAS), the Scanning High-resolution Interferometer Sounder (S-HIS) and the Cloud Physics Lidar (CPL) are compared to simulations performed with a line-by-line and multiple scattering modeling methodology (LBLMS). Formerly used for infrared hyper-spectral data analysis, LBLMS has been extended to the visible and near infrared with the inclusion of surface bi-directional reflectance properties. A number of scenes are evaluated: two clear scenes, one with nadir geometry and one cross-track encompassing sun glint, and three cloudy scenes, all with nadir geometry. <br><br> CPL data is used to estimate the particulate optical depth at 532 nm for the clear and cloudy scenes and cloud upper and lower boundaries. Cloud optical depth is retrieved from S-HIS infrared window radiances, and it agrees with CPL values, to within natural variability. MAS data are simulated convolving high resolution radiances. The paper discusses the results of the comparisons for the clear and cloudy cases. LBLMS clear simulations agree with MAS data to within 20% in the shortwave (SW) and near infrared (NIR) spectrum and within 2 K in the infrared (IR) range. It is shown that cloudy sky simulations using cloud parameters retrieved from IR radiances systematically underestimate the measured radiance in the SW and NIR by nearly 50%, although the IR retrieved optical thickness agree with same measured by CPL. <br><br> MODIS radiances measured from Terra are also compared to LBLMS simulations in cloudy conditions, using retrieved cloud optical depth and effective radius from MODIS, to understand the origin for the observed discrepancies. It is shown that the simulations agree, to within natural variability, with measurements in selected MODIS SW bands. <br><br> The impact of the assumed particles size distribution and vertical profile of ice content on results is evaluated. Sensitivity is much smaller than differences between measured and simulated radiances in the SW and NIR. <br><br> The paper dwells on a possible explanation of these contradictory results, involving the phase function of ice particles in the shortwave

Retrieving sea ice drag coefficients and turning angles from in situ and satellite observations using an inverse modeling framework

Author Posting. © American Geophysical Union, 2019. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Journal of Geophysical Research-Oceans 124(8), (2019): 6388-6413, doi: 10.1029/2018JC014881.For ice concentrations less than 85%, internal ice stresses in the sea ice pack are small and sea ice is said to be in free drift. The sea ice drift is then the result of a balance between Coriolis acceleration and stresses from the ocean and atmosphere. We investigate sea ice drift using data from individual drifting buoys as well as Arctic‐wide gridded fields of wind, sea ice, and ocean velocity. We perform probabilistic inverse modeling of the momentum balance of free‐drifting sea ice, implemented to retrieve the Nansen number, scaled Rossby number, and stress turning angles. Since this problem involves a nonlinear, underconstrained system, we used a Monte Carlo guided search scheme—the Neighborhood Algorithm—to seek optimal parameter values for multiple observation points. We retrieve optimal drag coefficients of CA=1.2×10−3 and CO=2.4×10−3 from 10‐day averaged Arctic‐wide data from July 2014 that agree with the AIDJEX standard, with clear temporal and spatial variations. Inverting daily averaged buoy data give parameters that, while more accurately resolved, suggest that the forward model oversimplifies the physical system at these spatial and temporal scales. Our results show the importance of the correct representation of geostrophic currents. Both atmospheric and oceanic drag coefficients are found to decrease with shorter temporal averaging period, informing the selection of drag coefficient for short timescale climate models.The scripts developed for this publication are available at the GitHub (https://github.com/hheorton/Freedrift_inverse_submit). The Neighborhood Algorithm was developed and kindly supplied by M. Sambridge (http://www.iearth.org.au/codes/NA/). Ice‐Tethered Profiler data are available via the Ice‐Tethered Profiler program website (http://whoi.edu/itp). Buoy data were collected as part of the Marginal Ice Zone program (www.apl.washington.edu/miz) funded by the U.S. Office of Naval Research. The ice drift data were kindly supplied by N. Kimura. H. H. was funded by the Natural Environment Research Council (Grants NE/I029439/1 and NE/R000263/1). M. T. was partially funded by the SKIM Mission Science Study (SKIM‐SciSoc) Project ESA RFP 3‐15456/18/NL/CT/gp. T. A. was supported at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration. M. T. and H. H. thank Dr. Nicolas Brantut for early discussions on the implementation of inverse modeling techniques.2020-02-1

Inverse electromagnetic scattering models for sea ice

Journal ArticleInverse scattering algorithms for reconstructing the physical properties of sea ice from scattered electromagnetic field data are presented. The development of these algorithms has advanced the theory of remote sensing, particularly in the microwave region, and has the potential to form the basis for a new generation of techniques for recovering sea ice properties, such as ice thickness, a parameter of geophysical and climatological importance. Moreover, the analysis underlying the algorithms has led to significant advances in the mathematical theory of inverse problems

Investigation of antenna pattern constraints for passive geosynchronous microwave imaging radiometers

Progress by investigators at Georgia Tech in defining the requirements for large space antennas for passive microwave Earth imaging systems is reviewed. In order to determine antenna constraints (e.g., the aperture size, illumination taper, and gain uncertainty limits) necessary for the retrieval of geophysical parameters (e.g., rain rate) with adequate spatial resolution and accuracy, a numerical simulation of the passive microwave observation and retrieval process is being developed. Due to the small spatial scale of precipitation and the nonlinear relationships between precipitation parameters (e.g., rain rate, water density profile) and observed brightness temperatures, the retrieval of precipitation parameters are of primary interest in the simulation studies. Major components of the simulation are described as well as progress and plans for completion. The overall goal of providing quantitative assessments of the accuracy of candidate geosynchronous and low-Earth orbiting imaging systems will continue under a separate grant

Exploring the limits of variational passive microwave retrievals

2017 Summer.Includes bibliographical references.Passive microwave observations from satellite platforms constitute one of the most important data records of the global observing system. Operational since the late 1970s, passive microwave data underpin climate records of precipitation, sea ice extent, water vapor, and more, and contribute significantly to numerical weather prediction via data assimilation. Detailed understanding of the observation errors in these data is key to maximizing their utility for research and operational applications alike. However, the treatment of observation errors in this data record has been lacking and somewhat divergent when considering the retrieval and data assimilation communities. In this study, some limits of passive microwave imager data are considered in light of more holistic treatment of observation errors. A variational retrieval, named the CSU 1DVAR, was developed for microwave imagers and applied to the GMI and AMSR2 sensors for ocean scenes. Via an innovative method to determine forward model error, this retrieval accounts for error covariances across all channels used in the iteration. This improves validation in more complex scenes such as high wind speed and persistently cloudy regimes. In addition, it validates on par with a benchmark dataset without any tuning to in-situ observations. The algorithm yields full posterior error diagnostics and its physical forward model is applicable to other sensors, pending intercalibration. This retrieval is used to explore the viability of retrieving parameters at the limits of the available information content from a typical microwave imager. Retrieval of warm rain, marginal sea ice, and falling snow are explored with the variational retrieval. Warm rain retrieval shows some promise, with greater sensitivity than operational GPM algorithms due to leveraging CloudSat data and accounting for drop size distribution variability. Marginal sea ice is also detected with greater sensitivity than a standard operational retrieval. These studies ultimately show that while a variational algorithm maximizes the effective signal to noise ratio of these observations, hard limitations exist due to the finite information content afforded by a typical microwave imager

On the properties of cirrus clouds over the tropical West Pacific

June 2002.Includes bibliographical references.Sponsored by DOE/ARM DE-FG03-94ER61748.Sponsored by DOE/ARM DE-FG03-98ER62569

Innovative Techniques for the Retrieval of Earth’s Surface and Atmosphere Geophysical Parameters: Spaceborne Infrared/Microwave Combined Analyses

With the advent of the first satellites for Earth Observation: Landsat-1 in July 1972 and ERS-1 in May 1991, the discipline of environmental remote sensing has become, over time, increasingly fundamental for the study of phenomena characterizing the planet Earth. The goal of environmental remote sensing is to perform detailed analyses and to monitor the temporal evolution of different physical phenomena, exploiting the mechanisms of interaction between the objects that are present in an observed scene and the electromagnetic radiation detected by sensors, placed at a distance from the scene, operating at different frequencies. The analyzed physical phenomena are those related to climate change, weather forecasts, global ocean circulation, greenhouse gas profiling, earthquakes, volcanic eruptions, soil subsidence, and the effects of rapid urbanization processes. Generally, remote sensing sensors are of two primary types: active and passive. Active sensors use their own source of electromagnetic radiation to illuminate and analyze an area of interest. An active sensor emits radiation in the direction of the area to be investigated and then detects and measures the radiation that is backscattered from the objects contained in that area. Passive sensors, on the other hand, detect natural electromagnetic radiation (e.g., from the Sun in the visible band and the Earth in the infrared and microwave bands) emitted or reflected by the object contained in the observed scene. The scientific community has dedicated many resources to developing techniques to estimate, study and analyze Earth’s geophysical parameters. These techniques differ for active and passive sensors because they depend strictly on the type of the measured physical quantity. In my P.h.D. work, inversion techniques for estimating Earth’s surface and atmosphere geophysical parameters will be addressed, emphasizing methods based on machine learning (ML). In particular, the study of cloud microphysics and the characterization of Earth’s surface changes phenomenon are the critical points of this work

Retrieval of Aerosol Optical Thickness in the Arctic Snow-Covered Regions Using Passive Remote Sensing: Impact of Aerosol Typing and Surface Reflection Model

Currently, no aerosol optical thickness (AOT) data set over the Arctic snow/ice-covered regions derived from space-borne passive remote sensing is available. The challenge is to develop an accurate and robust technique to derive AOT above highly variable and bright snow/ice surfaces. To extend data coverage of the eXtensible Bremen Aerosol/cloud and surfacE Retrieval (XBAER) AOT data product in the future, we propose a new algorithm for the retrieval of AOT and surface properties over snow/ice simultaneously. The algorithm utilizes the linear perturbation theory and does not use any simplified atmospheric correction techniques. Key issues like the selection of a proper aerosol type and optimal surface parameterization method for the retrieval of AOT over the Arctic have been investigated. The aerosol type is investigated using the aerosol climatology microphysical properties derived from four Aerosol Robotic Network (AERONET) sites (Barrow, Hornsund, Kangerlussuaq, and Tiksi). The three-parametric Ross-Li linear kernel model is used to describe the snow bidirectional reflectance distribution function (BRDF). The a priori knowledge of wavelength-dependent features of the coefficients in the Ross-Li linear kernel model is derived from Polarization and Directionality of the Earth's Reflectances (POLDER) measurements over the Arctic and utilized as constraints in the retrieval. The studies show that the combination of Ross-Li surface model and weakly absorbing aerosol parameterization provides an optimal way to derive AOT over the Arctic snow/ice-covered regions from passive remote sensing observations. The retrieved AOTs using POLDER show good agreement with AERONET observations

Electromagnetic Wave Theory and Applications

Contains table of contents for Section 3, reports on ten research projects and a list of publications.National Aeronautics and Space Administration Contract 958461U.S. Navy - Office of Naval Research Grant N00014-92-J-1616U.S. Navy - Office of Naval Research Grant N00014-89-J-1019U.S. Navy - Office of Naval Research Grant N00014-90-J-1002U.S. Army Cold Regions Research and Engineering Laboratory Contract PACA89-95-K-0014Mitsubishi Corporation Agreement Dated 8/31/95U.S. Navy - Office of Naval Research Grant N00014-92-J-4098U.S. Federal Aviation Administration Grant 94-G-007DEMACO Corporation Contract DEM-95-MIT-55Joint Services Electronics Program Contract DAAH04-95-1-003