59 research outputs found
Application of variable zero-moment point in walking control of the biped robot
Using the predictive control based on zero-moment point (ZMP), the biped robot can walk comparatively stably. However, the problems such as lack of self-adaptivity are also highlighted mainly on account of modeling errors and environmental perturbations; specifically, the tracking errors of ZMP are generated, leading to a reduced walking stability. To address this problem, in the present work, the expected ZMP was decomposed into the reference ZMP which is pre-planned offline, and the variable ZMP which can be varied in real time. With the addition of the variable ZMP, the outside interferences can be eliminated. By combining the predictive control system and the inverse system of variable ZMP, the walking pattern of the robot with favorable self-adaptivity can be achieved. Finally, the simulation results indicate that the self-adaptivity of the robot can be effectively improved using the proposed control system
Imprecise dynamic walking with time-projection control
We present a new walking foot-placement controller based on 3LP, a 3D model
of bipedal walking that is composed of three pendulums to simulate falling,
swing and torso dynamics. Taking advantage of linear equations and closed-form
solutions of the 3LP model, our proposed controller projects intermediate
states of the biped back to the beginning of the phase for which a discrete LQR
controller is designed. After the projection, a proper control policy is
generated by this LQR controller and used at the intermediate time. This
control paradigm reacts to disturbances immediately and includes rules to
account for swing dynamics and leg-retraction. We apply it to a simulated Atlas
robot in position-control, always commanded to perform in-place walking. The
stance hip joint in our robot keeps the torso upright to let the robot
naturally fall, and the swing hip joint tracks the desired footstep location.
Combined with simple Center of Pressure (CoP) damping rules in the low-level
controller, our foot-placement enables the robot to recover from strong pushes
and produce periodic walking gaits when subject to persistent sources of
disturbance, externally or internally. These gaits are imprecise, i.e.,
emergent from asymmetry sources rather than precisely imposing a desired
velocity to the robot. Also in extreme conditions, restricting linearity
assumptions of the 3LP model are often violated, but the system remains robust
in our simulations. An extensive analysis of closed-loop eigenvalues, viable
regions and sensitivity to push timings further demonstrate the strengths of
our simple controller
A Bio-inspired architecture for adaptive quadruped locomotion over irregular terrain
Tese de doutoramento
Programa Doutoral em Engenharia Electrónica e de ComputadoresThis thesis presents a tentative advancement on walking control of small quadruped and humanoid
position controlled robots, addressing the problem of walk generation by combining dynamical systems
approach to motor control, insights from neuroethology research on vertebrate motor control and
computational neuroscience.
Legged locomotion is a complex dynamical process, despite the seemingly easy and natural behavior
of the constantly present proficiency of legged animals. Research on locomotion and motor control
in vertebrate animals from the last decades has brought to the attention of roboticists, the potential of
the nature’s solutions to robot applications. Recent knowledge on the organization of complex motor
generation and on mechanics and dynamics of locomotion has been successfully exploited to pursue
agile robot locomotion.
The work presented on this manuscript is part of an effort on the pursuit in devising a general,
model free solution, for the generation of robust and adaptable walking behaviors. It strives to devise a
practical solution applicable to real robots, such as the Sony’s quadruped AIBO and Robotis’ DARwIn-
OP humanoid. The discussed solutions are inspired on the functional description of the vertebrate
neural systems, especially on the concept of Central Pattern Generators (CPGs), their structure and
organization, components and sensorimotor interactions. They use a dynamical systems approach for
the implementation of the controller, especially on the use of nonlinear oscillators and exploitation of
their properties.
The main topics of this thesis are divided into three parts.
The first part concerns quadruped locomotion, extending a previous CPG solution using nonlinear
oscillators, and discussing an organization on three hierarchical levels of abstraction, sharing the purpose
and knowledge of other works. It proposes a CPG solution which generates the walking motion
for the whole-leg, which is then organized in a network for the production of quadrupedal gaits. The
devised solution is able to produce goal-oriented locomotion and navigation as directed through highlevel
commands from local planning methods. In this part, active balance on a standing quadruped is
also addressed, proposing a method based on dynamical systems approach, exploring the integration of
parallel postural mechanisms from several sensory modalities. The solutions are all successfully tested on the quadruped AIBO robot.
In the second part, is addressed bipedal walking for humanoid robots. A CPG solution for biped
walking based on the concept of motion primitives is proposed, loosely based on the idea of synergistic
organization of vertebrate motor control. A set of motion primitives is shown to produce the basis
of simple biped walking, and generalizable to goal-oriented walking. Using the proposed CPG, the
inclusion of feedback mechanisms is investigated, for modulation and adaptation of walking, through
phase transition control according to foot load information. The proposed solution is validated on the
humanoid DARwIn-OP, and its application is evaluated within a whole-body control framework.
The third part sidesteps a little from the other two topics. It discusses the CPG as having an alternative
role to direct motor generation in locomotion, serving instead as a processor of sensory information
for a feedback based motor generation. In this work a reflex based walking controller is devised for the
compliant quadruped Oncilla robot, to serve as purely feedback based walking generation. The capabilities
of the reflex network are shown in simulations, followed by a brief discussion on its limitations,
and how they could be improved by the inclusion of a CPG.Esta tese apresenta uma tentativa de avanço no controlo de locomoção para pequenos robôs quadrúpedes
e bipedes controlados por posição, endereçando o problema de geração motora através da combinação
da abordagem de sistemas dinâmicos para o controlo motor, e perspectivas de investigação
neuroetologia no controlo motor vertebrado e neurociência computacional.
Andar é um processo dinâmico e complexo, apesar de parecer um comportamento fácil e natural
devido à presença constante de animais proficientes em locomoção terrestre. Investigação na área da locomoção
e controlo motor em animais vertebrados nas últimas decadas, trouxe à atenção dos roboticistas
o potencial das soluções encontradas pela natureza aplicadas a aplicações robóticas. Conhecimento
recente relativo à geração de comportamentos motores complexos e da mecânica da locomoção tem
sido explorada com sucesso na procura de locomoção ágil na robótica.
O trabalho apresentado neste documento é parte de um esforço no desenho de uma solução geral,
e independente de modelos, para a geração robusta e adaptável de comportamentos locomotores. O
foco é desenhar uma solução prática, aplicável a robôs reais, tal como o quadrúpede Sony AIBO e
o humanóide DARwIn-OP. As soluções discutidas são inspiradas na descrição funcional do sistema
nervoso vertebrado, especialmente no conceito de Central Pattern Generators (CPGs), a sua estrutura e
organização, componentes e interacção sensorimotora. Estas soluções são implementadas usando uma
abordagem em sistemas dinâmicos, focandos o uso de osciladores não lineares e a explorando as suas
propriedades.
Os tópicos principais desta tese estão divididos em três partes.
A primeira parte explora o tema de locomoção quadrúpede, expandindo soluções prévias de CPGs
usando osciladores não lineares, e discutindo uma organização em três níveis de abstracção, partilhando
as ideias de outros trabalhos. Propõe uma solução de CPG que gera os movimentos locomotores
para uma perna, que é depois organizado numa rede, para a produção de marcha quadrúpede. A
solução concebida é capaz de produzir locomoção e navegação, comandada através de comandos de alto
nível, produzidos por métodos de planeamento local. Nesta parte também endereçado o problema da
manutenção do equilíbrio num robô quadrúpede parado, propondo um método baseado na abordagem
em sistemas dinâmicos, explorando a integração de mecanismos posturais em paralelo, provenientes de várias modalidades sensoriais. As soluções são todas testadas com sucesso no robô quadrupede AIBO.
Na segunda parte é endereçado o problema de locomoção bípede. É proposto um CPG baseado
no conceito de motion primitives, baseadas na ideia de uma organização sinergética do controlo motor
vertebrado. Um conjunto de motion primitives é usado para produzir a base de uma locomoção bípede
simples e generalizável para navegação. Esta proposta de CPG é usada para de seguida se investigar
a inclusão de mecanismos de feedback para modulação e adaptação da marcha, através do controlo de
transições entre fases, de acordo com a informação de carga dos pés. A solução proposta é validada
no robô humanóide DARwIn-OP, e a sua aplicação no contexto do framework de whole-body control é
também avaliada.
A terceira parte desvia um pouco dos outros dois tópicos. Discute o CPG como tendo um papel
alternativo ao controlo motor directo, servindo em vez como um processador de informação sensorial
para um mecanismo de locomoção puramente em feedback. Neste trabalho é desenhado um controlador
baseado em reflexos para a geração da marcha de um quadrúpede compliant. As suas capacidades são
demonstradas em simulação, seguidas por uma breve discussão nas suas limitações, e como estas podem
ser ultrapassadas pela inclusão de um CPG.The presented work was possible thanks to the support by the Portuguese Science and Technology Foundation through the PhD grant SFRH/BD/62047/2009
Metastable legged-robot locomotion
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2008.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Includes bibliographical references (p. 195-215).A variety of impressive approaches to legged locomotion exist; however, the science of legged robotics is still far from demonstrating a solution which performs with a level of flexibility, reliability and careful foot placement that would enable practical locomotion on the variety of rough and intermittent terrain humans negotiate with ease on a regular basis. In this thesis, we strive toward this particular goal by developing a methodology for designing control algorithms for moving a legged robot across such terrain in a qualitatively satisfying manner, without falling down very often. We feel the definition of a meaningful metric for legged locomotion is a useful goal in and of itself. Specifically, the mean first-passage time (MFPT), also called the mean time to failure (MTTF), is an intuitively practical cost function to optimize for a legged robot, and we present the reader with a systematic, mathematical process for obtaining estimates of this MFPT metric. Of particular significance, our models of walking on stochastically rough terrain generally result in dynamics with a fast mixing time, where initial conditions are largely "forgotten" within 1 to 3 steps. Additionally, we can often find a near-optimal solution for motion planning using only a short time-horizon look-ahead. Although we openly recognize that there are important classes of optimization problems for which long-term planning is required to avoid "running into a dead end" (or off of a cliff!), we demonstrate that many classes of rough terrain can in fact be successfully negotiated with a surprisingly high level of long-term reliability by selecting the short-sighted motion with the greatest probability of success. The methods used throughout have direct relevance to machine learning, providing a physics-based approach to reduce state space dimensionality and mathematical tools to obtain a scalar metric quantifying performance of the resulting reduced-order system.by Katie Byl.Ph.D
Preference-Based Learning for User-Guided HZD Gait Generation on Bipedal Walking Robots
This paper presents a framework that unifies control theory and machine learning in the setting of bipedal locomotion. Traditionally, gaits are generated through trajectory optimization methods and then realized experimentally -- a process that often requires extensive tuning due to differences between the models and hardware. In this work, the process of gait realization via hybrid zero dynamics (HZD) based optimization problems is formally combined with preference-based learning to systematically realize dynamically stable walking. Importantly, this learning approach does not require a carefully constructed reward function, but instead utilizes human pairwise preferences. The power of the proposed approach is demonstrated through two experiments on a planar biped AMBER-3M: the first with rigid point feet, and the second with induced model uncertainty through the addition of springs where the added compliance was not accounted for in the gait generation or in the controller. In both experiments, the framework achieves stable, robust, efficient, and natural walking in fewer than 50 iterations with no reliance on a simulation environment. These results demonstrate a promising step in the unification of control theory and learning
Climbing and Walking Robots
Nowadays robotics is one of the most dynamic fields of scientific researches. The shift of robotics researches from manufacturing to services applications is clear. During the last decades interest in studying climbing and walking robots has been increased. This increasing interest has been in many areas that most important ones of them are: mechanics, electronics, medical engineering, cybernetics, controls, and computers. Today’s climbing and walking robots are a combination of manipulative, perceptive, communicative, and cognitive abilities and they are capable of performing many tasks in industrial and non- industrial environments. Surveillance, planetary exploration, emergence rescue operations, reconnaissance, petrochemical applications, construction, entertainment, personal services, intervention in severe environments, transportation, medical and etc are some applications from a very diverse application fields of climbing and walking robots. By great progress in this area of robotics it is anticipated that next generation climbing and walking robots will enhance lives and will change the way the human works, thinks and makes decisions. This book presents the state of the art achievments, recent developments, applications and future challenges of climbing and walking robots. These are presented in 24 chapters by authors throughtot the world The book serves as a reference especially for the researchers who are interested in mobile robots. It also is useful for industrial engineers and graduate students in advanced study
Sample-based motion planning in high-dimensional and differentially-constrained systems
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2010.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Cataloged from student submitted PDF version of thesis.Includes bibliographical references (p. 115-124).State of the art sample-based path planning algorithms, such as the Rapidly-exploring Random Tree (RRT), have proven to be effective in path planning for systems subject to complex kinematic and geometric constraints. The performance of these algorithms, however, degrade as the dimension of the system increases. Furthermore, sample-based planners rely on distance metrics which do not work well when the system has differential constraints. Such constraints are particularly challenging in systems with non-holonomic and underactuated dynamics. This thesis develops two intelligent sampling strategies to help guide the search process. To reduce sensitivity to dimension, sampling can be done in a low-dimensional task space rather than in the high-dimensional state space. Altering the sampling strategy in this way creates a Voronoi Bias in task space, which helps to guide the search, while the RRT continues to verify trajectory feasibility in the full state space. Fast path planning is demonstrated using this approach on a 1500-link manipulator. To enable task-space biasing for underactuated systems, a hierarchical task space controller is developed by utilizing partial feedback linearization. Another sampling strategy is also presented, where the local reachability of the tree is approximated, and used to bias the search, for systems subject to differential constraints. Reachability guidance is shown to improve search performance of the RRT by an order of magnitude when planning on a pendulum and non-holonomic car. The ideas of task-space biasing and reachability guidance are then combined for demonstration of a motion planning algorithm implemented on LittleDog, a quadruped robot. The motion planning algorithm successfully planned bounding trajectories over extremely rough terrain.by Alexander C. Shkolnik.Ph.D
- …