Finding Organized Structures in 3-D Ladar Data

In this paper, we address the problem of finding organized thin structures in three-dimensional (3-D) data. Linear and planar structures segmentation received much attention but thin structures organized in complex patterns remain a challenge for segmentation algorithms. We are interested especially in the problems posed by repetitive and symmetric structures acquired with a laser range finder. The method relies on 3-D data projections along specific directions and 2-D histograms comparison. The sensitivity of the classification algorithm to the parameter settings is evaluated and a segmentation method proposed. We illustrate our approach with data from a concertina wire in terrain with vegetation

Multi-wavelength, multi-beam, photonic based sensor for object discrimination and positioning

Over the last decade, substantial research efforts have been dedicated towards the development of advanced laser scanning systems for discrimination in perimeter security, defence, agriculture, transportation, surveying and geosciences. Military forces, in particular, have already started employing laser scanning technologies for projectile guidance, surveillance, satellite and missile tracking; and target discrimination and recognition. However, laser scanning is relatively a new security technology. It has previously been utilized for a wide variety of civil and military applications. Terrestrial laser scanning has found new use as an active optical sensor for indoors and outdoors perimeter security. A laser scanning technique with moving parts was tested in the British Home Office - Police Scientific Development Branch (PSDB) in 2004. It was found that laser scanning has the capability to detect humans in 30m range and vehicles in 80m range with low false alarm rates. However, laser scanning with moving parts is much more sensitive to vibrations than a multi-beam stationary optic approach. Mirror device scanners are slow, bulky and expensive and being inherently mechanical they wear out as a result of acceleration, cause deflection errors and require regular calibration. Multi-wavelength laser scanning represent a potential evolution from object detection to object identification and classification, where detailed features of objects and materials are discriminated by measuring their reflectance characteristics at specific wavelengths and matching them with their spectral reflectance curves. With the recent advances in the development of high-speed sensors and high-speed data processors, the implementation of multi-wavelength laser scanners for object identification has now become feasible. A two-wavelength photonic-based sensor for object discrimination has recently been reported, based on the use of an optical cavity for generating a laser spot array and maintaining adequate overlapping between tapped collimated laser beams of different wavelengths over a long optical path. While this approach is capable of discriminating between objects of different colours, its main drawback is the limited number of security-related objects that can be discriminated. This thesis proposes and demonstrates the concept of a novel photonic based multi-wavelength sensor for object identification and position finding. The sensor employs a laser combination module for input wavelength signal multiplexing and beam overlapping, a custom-made curved optical cavity for multi-beam spot generation through internal beam reflection and transmission and a high-speed imager for scattered reflectance spectral measurements. Experimental results show that five different laser wavelengths, namely 473nm, 532nm, 635nm, 670nm and 785nm, are necessary for discriminating various intruding objects of interest through spectral reflectance and slope measurements. Various objects were selected to demonstrate the proof of concept. We also demonstrate that the object position (coordinates) is determined using the triangulation method, which is based on the projection of laser spots along determined angles onto intruding objects and the measurement of their reflectance spectra using an image sensor. Experimental results demonstrate the ability of the multi-wavelength spectral reflectance sensor to simultaneously discriminate between different objects and predict their positions over a 6m range with an accuracy exceeding 92%. A novel optical design is used to provide additional transverse laser beam scanning for the identification of camouflage materials. A camouflage material is chosen to illustrate the discrimination capability of the sensor, which has complex patterns within a single sample, and is successfully detected and discriminated from other objects over a 6m range by scanning the laser beam spots along the transverse direction. By using more wavelengths at optimised points in the spectrum where different objects show different optical characteristics, better discrimination can be accomplished

Spectral LADAR: Active Range-Resolved Imaging Spectroscopy

Imaging spectroscopy using ambient or thermally generated optical sources is a well developed technique for capturing two dimensional images with high per-pixel spectral resolution. The per-pixel spectral data is often a sufficient sampling of a material's backscatter spectrum to infer chemical properties of the constituent material to aid in substance identification. Separately, conventional LADAR sensors use quasi-monochromatic laser radiation to create three dimensional images of objects at high angular resolution, compared to RADAR. Advances in dispersion engineered photonic crystal fibers in recent years have made high spectral radiance optical supercontinuum sources practical, enabling this study of Spectral LADAR, a continuous polychromatic spectrum augmentation of conventional LADAR. This imaging concept, which combines multi-spectral and 3D sensing at a physical level, is demonstrated with 25 independent and parallel LADAR channels and generates point cloud images with three spatial dimensions and one spectral dimension. The independence of spectral bands is a key characteristic of Spectral LADAR. Each spectral band maintains a separate time waveform record, from which target parameters are estimated. Accordingly, the spectrum computed for each backscatter reflection is independently and unambiguously range unmixed from multiple target reflections that may arise from transmission of a single panchromatic pulse. This dissertation presents the theoretical background of Spectral LADAR, a shortwave infrared laboratory demonstrator system constructed as a proof-of-concept prototype, and the experimental results obtained by the prototype when imaging scenes at stand off ranges of 45 meters. The resultant point cloud voxels are spectrally classified into a number of material categories which enhances object and feature recognition. Experimental results demonstrate the physical level combination of active backscatter spectroscopy and range resolved sensing to produce images with a level of complexity, detail, and accuracy that is not obtainable with data-level registration and fusion of conventional imaging spectroscopy and LADAR. The capabilities of Spectral LADAR are expected to be useful in a range of applications, such as biomedical imaging and agriculture, but particularly when applied as a sensor in unmanned ground vehicle navigation. Applications to autonomous mobile robotics are the principal motivators of this study, and are specifically addressed

Estimation of forest variables using airborne laser scanning

Airborne laser scanning can provide three-dimensional measurements of the forest canopy with high efficiency and precision. There are presently a large number of airborne laser scanning instruments in operation. The aims of the studies reported in this thesis were, to develop and validate methods for estimation of forest variables using laser data, and to investigate the influence of laser system parameters on the estimates. All studies were carried out in hemi-boreal forest at a test area in southwestern Sweden (lat. 58°30’N, long. 13°40’ E). Forest variables were estimated using regression models. On plot level, the Root Mean Square Error (RMSE) for mean tree height estimations ranged between 6% and 11% of the average value for different datasets and methods. The RMSE for stem volume estimations ranged between 19% and 26% of the average value for different datasets and methods. On stand level (area 0.64 ha), the RMSE was 3% and 11% of the average value for mean tree height and stem volume estimations, respectively. A simulation model was used to investigate the effect of different scanning angles on laser measurement of tree height and canopy closure. The effect of different scanning angles was different within different simulated forest types, e.g., different tree species. High resolution laser data were used for detection of individual trees. In total, 71% of the field measurements were detected representing 91% of the total stem volume. Height and crown diameter of the detected trees could be estimated with a RMSE of 0.63 m and 0.61 m, respectively. The magnitude of the height estimation errors was similar to what is usually achieved using field inventory. Using different laser footprint diameters (0.26 to 3.68 m) gave similar estimation accuracies. The tree species Norway spruce (Picea abies L. Karst.) and Scots pine (Pinus sylvestris L.) were discriminated at individual tree level with an accuracy of 95%. The results in this thesis show that airborne laser scanners are useful as forest inventory tools. Forest variables can be estimated on tree level, plot level and stand level with similar accuracies as traditional field inventories

Single-photon counting lidar for long-range three-dimensional imaging

Single-photon time-of-flight (ToF) distance ranging lidar is a candidate technology for high-resolution depth imaging for use, for example, from airborne platforms. This approach enables low average power pulsed laser sources to be used while allowing imaging from significantly longer target ranges compared to analogue imaging. The recent availability of Geiger-mode (Gm) arrays has revolutionised photon-counting lidar as they provide single-photon full-frame data in short acquisition times. This thesis presents work on the opto-mechanical design, tolerance analysis and performance evaluation of a re-configurable single-photon counting lidar which can accommodate either a single-element single-photon avalanche photodiode (SPAD) or a 32 × 32 Gm-array. By incorporating an inter-changeable lens, the two configurations were designed to provide identical pixel resolution for both the single-pixel system and the Gm-array configurations in order to permit a performance comparison to be conducted. This is the first time that such a comparison has been reported and the lidar is one of the earliest to assess the performance of a short-wave infra-red (SWIR) Gm-array. Both detection configurations used InGaAs/InP SPAD detectors and operated at a wavelength of 1550 nm. The main benefits of operating within the SWIR band include reduced solar background, lower atmospheric loss, improved covertness, as well as improved laser eye-safety thresholds. The system estimates target range by measuring the ToF using time-correlated single-photon counting (TCSPC) and was used to produce high-resolution three-dimensional images of targets at between 800 m and 10.5 km range. The single-element system has the potential to provide improved depth resolution over the array due to a smaller timing jitter but requires longer acquisition times due to the need for two-dimensional scanning. The acquisition time of the array configuration can be up to three orders of magnitude faster than the single-element configuration but requires significantly higher average laser power levels. The Gm-array provided a simultaneous estimation of angle-of-arrival and intensity fluctuations from which a comparable strength of atmospheric turbulence could be measured. This demonstrated that Gm-arrays provide a new way of high-speed turbulence measurement with time intervals much shorter than those offered by existing scintillometers

NASA Tech Briefs, January 2003

Topics covered include: Optoelectronic Tool Adds Scale Marks to Photographic Images; Compact Interconnection Networks Based on Quantum Dots; Laterally Coupled Quantum-Dot Distributed-Feedback Lasers; Bit-Serial Adder Based on Quantum Dots; Stabilized Fiber-Optic Distribution of Reference Frequency; Delay/Doppler-Mapping GPS-Reflection Remote-Sensing System; Ladar System Identifies Obstacles Partly Hidden by Grass; Survivable Failure Data Recorders for Spacecraft; Fiber-Optic Ammonia Sensors; Silicon Membrane Mirrors with Electrostatic Shape Actuators; Nanoscale Hot-Wire Probes for Boundary-Layer Flows; Theodolite with CCD Camera for Safe Measurement of Laser-Beam Pointing; Efficient Coupling of Lasers to Telescopes with Obscuration; Aligning Three Off-Axis Mirrors with Help of a DOE; Calibrating Laser Gas Measurements by Use of Natural CO2; Laser Ranging Simulation Program; Micro-Ball-Lens Optical Switch Driven by SMA Actuator; Evaluation of Charge Storage and Decay in Spacecraft Insulators; Alkaline Capacitors Based on Nitride Nanoparticles; Low-EC-Content Electrolytes for Low-Temperature Li-Ion Cells; Software for a GPS-Reflection Remote-Sensing System; Software for Building Models of 3D Objects via the Internet; "Virtual Cockpit Window" for a Windowless Aerospacecraft; CLARAty Functional-Layer Software; Java Library for Input and Output of Image Data and Metadata; Software for Estimating Costs of Testing Rocket Engines; Energy-Absorbing, Lightweight Wheels; Viscoelastic Vibration Dampers for Turbomachine Blades; Soft Landing of Spacecraft on Energy-Absorbing Self-Deployable Cushions; Pneumatically Actuated Miniature Peristaltic Vacuum Pumps; Miniature Gas-Turbine Power Generator; Pressure-Sensor Assembly Technique; Wafer-Level Membrane-Transfer Process for Fabricating MEMS; A Reactive-Ion Etch for Patterning Piezoelectric Thin Film; Wavelet-Based Real-Time Diagnosis of Complex Systems; Quantum Search in Hilbert Space; Analytic Method for Computing Instrument Pointing Jitter; and Semiselective Optoelectronic Sensors for Monitoring Microbes