Comparative Analysis of Mobile 3D Scanning Technologies for Design, Manufacture of Interior and Exterior Tensile Material Structures and Canvasman Ltd. Case Study

This report aimed to investigate mobile 3D Scanning technologies to improve the 3D data capture and efficiency into Canvasman’s CAD design and manufacturing processes with focus on accurate resolution. The Santander funded Collaborative Venture Fund (CVF) project has provided research, survey data, evaluation and analysis for Canvasman Ltd. on 3D portable scanning hardware and software. The project solutions recommended in this report offers impartial product information on the current appropriate 3D scanning technology that potentially could improve efficiency of data capturing, design and manufacture of interior and exterior spaces, boats, vehicles and other similar constructions for creating and installing flexible coverings and indoor and outdoor structures

A novel haptic model and environment for maxillofacial surgical operation planning and manipulation

This paper presents a practical method and a new haptic model to support manipulations of bones and their segments during the planning of a surgical operation in a virtual environment using a haptic interface. To perform an effective dental surgery it is important to have all the operation related information of the patient available beforehand in order to plan the operation and avoid any complications. A haptic interface with a virtual and accurate patient model to support the planning of bone cuts is therefore critical, useful and necessary for the surgeons. The system proposed uses DICOM images taken from a digital tomography scanner and creates a mesh model of the filtered skull, from which the jaw bone can be isolated for further use. A novel solution for cutting the bones has been developed and it uses the haptic tool to determine and define the bone-cutting plane in the bone, and this new approach creates three new meshes of the original model. Using this approach the computational power is optimized and a real time feedback can be achieved during all bone manipulations. During the movement of the mesh cutting, a novel friction profile is predefined in the haptical system to simulate the force feedback feel of different densities in the bone

An analytical approach to converting vibration signal to combustion characteristics of homogeneous charge compression ignition engines

Homogeneous charge compression ignition (HCCI) is a promising low-temperature combustion technique for low-emission internal combustion engines. Unlike conventional engines, HCCI lacks a direct ignition control mechanism, necessitating closed-loop combustion control. This study proposes a phenomenological-based, cost-effective, and non-intrusive approach using vibration data analysis to determine essential combustion parameters. Experiments were conducted on a single-cylinder research engine with an accelerometer attached to the engine head. The engine operation envelope covered the whole engine’s operating area in naturally aspirated HCCI mode. Wavelet analysis revealed that combustion-related frequencies centered around 500 Hz, independent of operating conditions. The correlation-seeking analysis included peak acceleration amplitude and its crank angle with peak heat release rate (HRR) data. The peak HRR location was accurately identified within one degree when vibration amplitude exceeded the 100 m/s2 threshold. This encompassed 98.5% of the analyzed combustion cycles. The peak HRR prediction accuracy had a maximum error below 21% and was suitable to monitor reaction rates, especially in incomplete combustion and high ringing cycles.© 2023 The Author(s). Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).fi=vertaisarvioitu|en=peerReviewed

Influence of the CAD-CAM Systems on the Marginal Accuracy and Mechanical Properties of Dental Restorations

The aim of this study was to compare the quality of different computer-assisted-design and computer assisted manufacturing systems (CAD-CAM) generated by only one scanner, focusing on vertical fit discrepancies and the mechanical properties. A master model was obtained from a real clinical situation: the replacement of an absent (pontic) tooth, with the construction of a fixed partial denture on natural abutments with three elements. Nine scans were performed by each tested and 36 copies were designed using a dental CAD-CAM software (Exocad). The frameworks were manufactured using three-axis and five-axis, with the same batch of the chrome-cobalt (CrCo) alloy. The frameworks were not cemented. A focus ion beam-high resolution scanning electron microscope (FIB-HRSEM) allowed us to obtain the vertical gap measurements in five points for each specimen. Roughness parameters were measured using white light interferometry (WLI). The samples were mechanically characterized by means of flexural tests. A servo-hydraulic testing machine was used with a cross-head rate of 1 mm/min. One-way ANOVA statistical analysis was performed to determine whether the vertical discrepancies and mechanical properties were significantly different between each group (significance level p < 0.05). The overall mean marginal gap values ranged: from 92.38 ± 19.24 µm to 19.46 ± 10.20 µm, for the samples produced by three-axis and five-axis machines, respectively. Roughness was lower in the five-axis machine than the three-axis one, and as a consequence, the surface quality was better when the five-axis machine was used. These results revealed a statistically significant difference (p < 0.005) in the mean marginal gap between the CAD-CAM systems studied. The flexural strength for these restorations range from 6500 to 7000 N, and does not present any statistical differences’ significance between two CAD-CAM systems studied. This contribution suggests that the number of axes improves vertical fit and surface quality due to the lower roughness. These claims show some discrepancies with other studies

Mechanical properties of CoCr dental-prosthesis restorations made by three manufacturing processes. Influence of the microstructure and topography

The aim of this study is to compare the mechanical properties of three different dental restorations’ manufacturing processes (CADCAM milling, casting and laser sintering) generated by only one laboratory scanner focusing on marginal fit analysis and their mechanical properties. A chrome-cobalt (Cr-Co) alloy from the same batch was used for three different methods to make an implant abutment. This simulates a maxillary right first molar that was fixed in a hemi-maxillary stone model. Five scans were performed by each tested framework. Nine frameworks were manufactured for each manufacture procedure. Field-Emission Scanning Electron Microscope (FE-SEM) direct vision was used to marginal gap measurement in five critical points for each specimen. In order to fix the samples in the microscope chamber, the restorations were submitted at a compression load of 50 N. The samples always have the same orientation and conditions. The resolution of the microscope is 4 nm and it is equipped by J image software. The microstructure of the samples was also determined with the FE-SEM equipped with EDS-microanalysis. Roughness parameters were measured using White Light Interferometry (WLI). The arithmetical mean for the Ra and Rq of each sample was calculated. The samples were mechanically characterized by means of microhardness and flexural testing. Servo-hydraulic testing machine was used with cross-head rate of 1 mm/min. Two-way ANOVA statistical analysis was performed to determine whether the marginal discrepancies and mechanical properties were significantly different between each group (significance level p < 0.05). The overall mean marginal gap values were: from 50.53 ± 10.30 µm for the samples produced by CADCAM to 85.76 ± 22.56 µm for the samples produced by the casting method. Laser sintering presents a marginal gap of 60.95 ± 20.66 µm. The results revealed a statistically significant difference (p-value < 0.005) in the mean marginal gap between the CADCAM systems studied. The higher flexure load to fracture for these restorations were for CADCAM restoration and the lower was for the casting samples. For these restorations, CADCAM Restoration yielded a higher flexure load to fracture and Casting ones yielded the lower. Porosity and microstructure play a very important role in the mechanical properties.Peer ReviewedPostprint (published version

Fracture strength of endocrown maxillary restorations using different preparation designs and materials.

PURPOSE This study investigated the impact of preparation design and material types on fracture strength in maxillary premolars endocrowns after thermodynamic aging. MATERIALS AND METHODS Eighty two-rooted maxillary premolar crowns underwent endodontic treatment (N = 80, n = 10). The teeth were categorized into ten groups (4-mm deep with no intracanal extension lithium disilicate glass ceramic & multilayer zirconia endocrowns (LE0 & ZE0); 4-mm deep with 4-mm intracanal extension in one canal (LE1 & ZE1); 4-mm deep with 2-mm intracanal extensions in both canals (LE2 & ZE2); flat overlays with no endocore (LO & ZO); glass fiber reinforced post & core and crown (LC & ZC)). After cementation, all specimens were subjected to 1500 thermocycles and 1,200,000 chewing cycles with an axial occlusal load of 49 N. A static loading test was performed at a non-axial 45° loading using a universal testing machine and failure modes (Type I: restoration debonding; Type II: restoration fracture; Type III: restoration/tooth complex fracture above bone level; Type IV: restoration/tooth complex fracture below bone level) were evaluated using a stereoscope. Data were ananalzed using 2-way ANOVA and Tukey's tests (alpha = 0.05). RESULTS The endocrowns manufactured from multilayered zirconia and pressed lithium disilicate glass ceramic exhibited a fracture load ranging between 1334 ± 332 N and 756 ± 150 N, with ZC presenting the highest and LE2 the lowest values. The differences were not statistically significant (p > 0.05). CONCLUSION All endocrowns tested in this study performed similar considering the different designs and materials tested. The distribution of fracture modes did not differ significantly depending on the design of the restoration and the type of material used

A longitudinal analysis of the choice between technology-based strategic alliances and acquisitions in high-tech industries : the case of the ASIC industry

Firms producing application specific integrated circuits (ASICs) have established numerous technology based strategic alliances (SAs) and were involved in merger and acquisition activities (M&As) to enhance their competitive position by improving their learning capabilities and the timely access to technological knowledge that is otherwise unavailable. There exist broad economic and managerial strands of literature about SAs and M&As, but they tell us virtually nothing about the strategic choice of firms between technology based SAs and M&As. This article intends to fill this void. It examines the circumstances in which ASIC-producers choose for SAs or M&As and it analyses how prior SAs influence this choice. Finally, implications for innovation management in high-tech industries are examined.research and development ;