An efficient imaging algorithm for GNSS-R bi-static SAR

Global Navigation Satellite System Reflectometry (GNSS-R) based Bi-static Synthetic Aperture Radar (BSAR) is becoming more and more important in remote sensing, given its low power, low mass, low cost, and real-time global coverage capability. Due to its complex configuration, the imaging for GNSS-R BSAR is usually based on the Back-Projection Algorithm (BPA), which is very time consuming. In this paper, an efficient and general imaging algorithm for GNSS-R BSAR is presented. A Two Step Range Cell Migration (TSRCM) correction is firstly applied. The first step roughly compensates the RCM and Doppler phase caused by the motion of the transmitter, which simplifies the SAR data into the quasi-mono-static case. The second step removes the residual RCM caused by the motion of the receiver using the modified frequency scaling algorithm. Then, a cubic phase perturbation operation is introduced to equalize the Doppler frequency modulation rate along the same range cell. Finally, azimuth phase compensation and geometric correction are completed to obtain the focused SAR image. A simulation and experiment are conducted to demonstrate the feasibility of the proposed algorithm, showing that the proposed algorithm is more efficient than the BPA, without causing significant degradation in imaging quality

An imaging algorithm for spaceborne high-squint L-band SAR based on time-domain rotation

For spaceborne high-squint L-band synthetic aperture radar (SAR), the long wavelength and high-squint angle result in strong coupling between the range and azimuth directions. In conventional imaging algorithms, linear range walk correction (LRWC) is commonly used to correct linear range cell migration which dominates the coupling. However, LRWC introduces spatial variation in the azimuth direction, limits the depth-of-azimuth-focus (DOAF) and affects the imaging quality. This article constructs a polynomial range model and develops a modified omega-k algorithm to achieve spaceborne high-squint L-band SAR imaging. The key to this algorithm is to rotate the two-dimensional (2-D) data after LRWC in the time domain by a proposed time-rotation (TR) operation that eliminates the DOAF degradation caused by LRWC. The proposed algorithm, which is composed of LRWC, bulk compression, TR, and modified Stolt interpolation, achieves well-focused results at a 1-m resolution and a swath of 4 km × 4 km at a squint angle of 45°

Frequency-modulated continuous-wave synthetic-aperture radar: improvements in signal processing

With the advance of solid state devices, frequency-modulated continuous-wave (FMCW) designs have recently been used in synthetic-aperture radar (SAR) to decrease cost, size, weight and power consumption, making it deployable on smaller mobile plat-forms, including small (< 25 kg) unmanned aerial vehicle(s) (UAV). To foster its mobile uses, several SAR capabilities were studied: moving target indication (MTI) for increased situational awareness, bistatic operation, e.g. in UAV formation flights, for increased range, and signal processing algorithms for faster real-time performance. Most off-the-shelf SAR systems for small mobile platforms are commercial proprie-tary and/or military (ITAR, International Trades in Arms Regulations) restricted. As such, it necessitated the design and build of a prototype FMCW SAR system at the early stage to serve as a research tool. This enabled unrestricted hardware and software modifica-tions and experimentation. A model to analyze the triangularly modulated (TM) linear frequency modulated (LFM) waveform as one signal was established and used to develop a MTI algorithm which is effective for slow moving targets detection. Experimental field data collected by the prototyped FMCW SAR was then used to validate and demonstrate the effectiveness of the proposed MTI method. A bistatic FMCW SAR model was next introduced: Bistatic configuration is a poten-tial technique to overcome the power leakage problem in monostatic FMCW SAR. By mounting the transmitter and receiver on spatially separate mobile (UAV) platforms in formation deployment, the operation range of a bistatic FMCW SAR can be significantly improved. The proposed approximation algorithm established a signal model for bistatic FMCW SAR by using the Fresnel approximation. This model allows the existing signal processing algorithms to be used in bistatic FMCW SAR image generation without sig-nificant modification simplifying bistatic FMCW SAR signal processing. The proposed range migration algorithm is a versatile and efficient FMCW SAR sig-nal processing algorithm which requires less memory and computational load than the traditional RMA. This imaging algorithm can be employed for real-time image genera-tion by the FMCW SAR system on mobile platforms. Simulation results verified the pro-posed spectral model and experimental data demonstrated the effectiveness of the modi-fied RMA

Arrayed synthetic aperture radar

In this thesis, the use of array processing techniques applied to Single Input Multiple Output (SIMO) SAR systems with enhanced capabilities is investigated. In Single Input Single Output (SISO) SAR systems there is a high resolution, wide swath contradiction, whereby it is not possible to increase both cross-range resolution and the imaged swath width simultaneously. To overcome this, a novel beamformer for SAR systems in the cross-range direction is proposed. In particular, this beamformer is a superresolution beamformer capable of forming wide nulls using subspace based approaches. SIMO SAR systems also give rise to additional sets of received data, which includes geometrical information about the SAR and target environment, and can be used for enhanced target parameter estimation. In particular, this thesis looks at round trip delay, joint azimuth and elevation angle, and relative target power estimation. For round trip delay estimation, the use of the traditional matched filter with subspace partitioning is proposed. Then by using a joint 2D Multiple Signal Classification (MUSIC) algorithm, joint Direction of Arrival (DOA) estimation can be achieved. Both the use of range lines of raw SAR data and the use of a Region of Interest (ROI) of a SAR image are investigated. However in terms of imaging, MUSIC is not well-suited for SAR, due to its target response not corresponding to the target's true power return. Therefore a joint DOA and target power estimation algorithm is proposed to overcome this limitation. These algorithms provide the framework for the development of three processing techniques. These allow sidelobe suppression in the slant range direction, along with the reconstruction of undersampled data and region enhancement using MUSIC with power preservation.Open Acces

Radar Imaging in Challenging Scenarios from Smart and Flexible Platforms

undefine

Advances in Synthetic Aperture Radar from a Wavenumber Perspective

This dissertation examines the wavenumber domain of Synthetic Aperture Radar (SAR) images. This domain is the inverse Fourier transform domain of a SAR image. The dissertation begins with the radar receiver's signal model and develops equations describing the wavenumber domain of a SAR image produced by a generalized bistatic and monostatic SAR system. Then, closed form expressions for bistatic synthetic aperture radar spatial resolution of a generalized system from the wavenumber domain are developed. These spatial resolution equations have not previously appeared in the literature. From these equations, significant resolution is found in both range and cross-range forecasting a forward-scatter bistatic SAR image when the elevation angles of each bistatic platform are significantly different. Next, wavenumber and time domain image formation algorithms are discussed. Developed within this dissertation is a wavenumber preprocessing method that increases the speed of the Back Projection Algorithm (BPA). This preprocessing method takes advantage of deramped SAR radar returns and their polar wavenumber format. This new algorithm is called the Fast Decimated Wavenumber Back Projection Algorithm (FDWBPA). Matlab functions are included to implement this algorithm, simulate bistatic SAR images and process the data from anechoic chamber tests demonstrating forward scatter resolution

Signal Processing for Synthetic Aperture Sonar Image Enhancement

This thesis contains a description of SAS processing algorithms, offering improvements in Fourier-based reconstruction, motion-compensation, and autofocus. Fourier-based image reconstruction is reviewed and improvements shown as the result of improved system modelling. A number of new algorithms based on the wavenumber algorithm for correcting second order effects are proposed. In addition, a new framework for describing multiple-receiver reconstruction in terms of the bistatic geometry is presented and is a useful aid to understanding. Motion-compensation techniques for allowing Fourier-based reconstruction in widebeam geometries suffering large-motion errors are discussed. A motion-compensation algorithm exploiting multiple receiver geometries is suggested and shown to provide substantial improvement in image quality. New motion compensation techniques for yaw correction using the wavenumber algorithm are discussed. A common framework for describing phase estimation is presented and techniques from a number of fields are reviewed within this framework. In addition a new proof is provided outlining the relationship between eigenvector-based autofocus phase estimation kernels and the phase-closure techniques used astronomical imaging. Micronavigation techniques are reviewed and extensions to the shear average single-receiver micronavigation technique result in a 3 - 4 fold performance improvement when operating on high-contrast images. The stripmap phase gradient autofocus (SPGA) algorithm is developed and extends spotlight SAR PGA to the wide-beam, wide-band stripmap geometries common in SAS imaging. SPGA supersedes traditional PGA-based stripmap autofocus algorithms such as mPGA and PCA - the relationships between SPGA and these algorithms is discussed. SPGA's operation is verified on simulated and field-collected data where it provides significant image improvement. SPGA with phase-curvature based estimation is shown and found to perform poorly compared with phase-gradient techniques. The operation of SPGA on data collected from Sydney Harbour is shown with SPGA able to improve resolution to near the diffraction-limit. Additional analysis of practical stripmap autofocus operation in presence of undersampling and space-invariant blurring is presented with significant comment regarding the difficulties inherent in autofocusing field-collected data. Field-collected data from trials in Sydney Harbour is presented along with associated autofocus results from a number of algorithms

Opportunistic radar imaging using a multichannel receiver

Bistatic Synthetic Aperture Radars have a physically separated transmitter and receiver where one or both are moving. Besides the advantages of reduced procurement and maintenance costs, the receiving system can sense passively while remaining covert which offers obvious tactical advantages. In this work, spaceborne monostatic SARs are used as emitters of opportunity with a stationary ground-based receiver. The imaging mode of SAR systems over land is usually a wide-swath mode such as ScanSAR or TOPSAR in which the antenna scans the area of interest in range to image a larger swath at the expense of degraded cross-range resolution compared to the conventional stripmap mode. In the bistatic geometry considered here, the signals from the sidelobes of the scanning beams illuminating the adjacent sub-swath are exploited to produce images with high cross-range resolution from data obtained from a SAR system operating in wide-swath mode. To achieve this, the SAR inverse problem is rigorously formulated and solved using a Maximum A Posteriori estimation method providing enhanced cross-range resolution compared to that obtained by classical burst-mode SAR processing. This dramatically increases the number of useful images that can be produced using emitters of opportunity. Signals from any radar satellite in the receiving band of the receiver can be used, thus further decreasing the revisit time of the area of interest. As a comparison, a compressive sensing-based method is critically analysed and proves more sensitive to off-grid targets and only suited to sparse scene. The novel SAR imaging method is demonstrated using simulated data and real measurements from C-band satellites such as RADARSAT-2 and ESA’s satellites ERS-2, ENVISAT and Sentinel-1A. In addition, this thesis analyses the main technological issues in bistatic SAR such as the azimuth-variant characteristic of bistatic data and the effect of imperfect synchronisation between the non-cooperative transmitter and the receiver

Monostatic Airborne Synthetic Aperture Radar Using Commercial WiMAX Transceivers In the License-exempt Spectrum

The past half-century witnessed an evolution of synthetic aperture radar (SAR). Boosted by digital signal processing (DSP), a variety of SAR imaging algorithms have been developed, in which the wavenumber domain algorithm is mature for airborne SAR and independent of signal waveforms. Apart from the algorithm development, there is a growing interest in how to acquire the raw data of targets’ echoes before the DSP for SAR imaging in a cost-effective way. For the data acquisition, various studies over the past 15 years have shed light on utilizing the signal generated from the ubiquitous broadband wireless technology – orthogonal frequency division multiplexing (OFDM). However, the purpose of this thesis is to enable commercial OFDM-based wireless systems to work as an airborne SAR sensor. The unlicensed devices of Worldwide interoperability for Microwave Access (WiMAX) are the first option, owing to their accessibility, similarity and economy. This dissertation first demonstrates the feasibility of applying WiMAX to SAR by discussing their similar features. Despite the similarities they share, the compatibility of the two technologies is undermined by a series of problems resulted from WiMAX transceiver mechanisms and industrial rules for radiated power. In order to directly apply commercial WiMAX base station transceivers in unlicensed band to airborne SAR application, we propose a radio-frequency (RF) front design together with a signal processing means. To be specific, a double-pole, double-throw (DPDT) switch is inserted between an antenna and two WiMAX transceivers for generating pulsed signal. By simulations, the transmitted power of the SAR sensor is lower than 0dBm, while its imaging range can be over 10km for targets with relatively large radar cross section (RCS), such as a ship. Its range resolution is 9.6m whereas its cross-range resolution is finer than 1m. Equipped with the multi-mode, this SAR sensor is further enhanced to satisfy the requirements of diversified SAR applications. For example, the width of the scan-mode SAR’s range swath is 2.1km, over five times the width of other modes. Vital developed Matlab code is given in Appendix D, and its correctness is shown by comparing with the image of chirped SAR. To summarize, the significance of this dissertation is to propose, for the first time, a design of directly leveraging commercial OFDM-based systems for airborne SAR imaging. Compared with existing designs of airborne SAR, it is a promising low-cost solution