Face recognition by means of advanced contributions in machine learning

Face recognition (FR) has been extensively studied, due to both scientific fundamental challenges and current and potential applications where human identification is needed. FR systems have the benefits of their non intrusiveness, low cost of equipments and no useragreement requirements when doing acquisition, among the most important ones. Nevertheless, despite the progress made in last years and the different solutions proposed, FR performance is not yet satisfactory when more demanding conditions are required (different viewpoints, blocked effects, illumination changes, strong lighting states, etc). Particularly, the effect of such non-controlled lighting conditions on face images leads to one of the strongest distortions in facial appearance. This dissertation addresses the problem of FR when dealing with less constrained illumination situations. In order to approach the problem, a new multi-session and multi-spectral face database has been acquired in visible, Near-infrared (NIR) and Thermal infrared (TIR) spectra, under different lighting conditions. A theoretical analysis using information theory to demonstrate the complementarities between different spectral bands have been firstly carried out. The optimal exploitation of the information provided by the set of multispectral images has been subsequently addressed by using multimodal matching score fusion techniques that efficiently synthesize complementary meaningful information among different spectra. Due to peculiarities in thermal images, a specific face segmentation algorithm has been required and developed. In the final proposed system, the Discrete Cosine Transform as dimensionality reduction tool and a fractional distance for matching were used, so that the cost in processing time and memory was significantly reduced. Prior to this classification task, a selection of the relevant frequency bands is proposed in order to optimize the overall system, based on identifying and maximizing independence relations by means of discriminability criteria. The system has been extensively evaluated on the multispectral face database specifically performed for our purpose. On this regard, a new visualization procedure has been suggested in order to combine different bands for establishing valid comparisons and giving statistical information about the significance of the results. This experimental framework has more easily enabled the improvement of robustness against training and testing illumination mismatch. Additionally, focusing problem in thermal spectrum has been also addressed, firstly, for the more general case of the thermal images (or thermograms), and then for the case of facialthermograms from both theoretical and practical point of view. In order to analyze the quality of such facial thermograms degraded by blurring, an appropriate algorithm has been successfully developed. Experimental results strongly support the proposed multispectral facial image fusion, achieving very high performance in several conditions. These results represent a new advance in providing a robust matching across changes in illumination, further inspiring highly accurate FR approaches in practical scenarios.El reconeixement facial (FR) ha estat àmpliament estudiat, degut tant als reptes fonamentals científics que suposa com a les aplicacions actuals i futures on requereix la identificació de les persones. Els sistemes de reconeixement facial tenen els avantatges de ser no intrusius,presentar un baix cost dels equips d’adquisició i no la no necessitat d’autorització per part de l’individu a l’hora de realitzar l'adquisició, entre les més importants. De totes maneres i malgrat els avenços aconseguits en els darrers anys i les diferents solucions proposades, el rendiment del FR encara no resulta satisfactori quan es requereixen condicions més exigents (diferents punts de vista, efectes de bloqueig, canvis en la il·luminació, condicions de llum extremes, etc.). Concretament, l'efecte d'aquestes variacions no controlades en les condicions d'il·luminació sobre les imatges facials condueix a una de les distorsions més accentuades sobre l'aparença facial. Aquesta tesi aborda el problema del FR en condicions d'il·luminació menys restringides. Per tal d'abordar el problema, hem adquirit una nova base de dades de cara multisessió i multiespectral en l'espectre infraroig visible, infraroig proper (NIR) i tèrmic (TIR), sota diferents condicions d'il·luminació. En primer lloc s'ha dut a terme una anàlisi teòrica utilitzant la teoria de la informació per demostrar la complementarietat entre les diferents bandes espectrals objecte d’estudi. L'òptim aprofitament de la informació proporcionada pel conjunt d'imatges multiespectrals s'ha abordat posteriorment mitjançant l'ús de tècniques de fusió de puntuació multimodals, capaces de sintetitzar de manera eficient el conjunt d’informació significativa complementària entre els diferents espectres. A causa de les característiques particulars de les imatges tèrmiques, s’ha requerit del desenvolupament d’un algorisme específic per la segmentació de les mateixes. En el sistema proposat final, s’ha utilitzat com a eina de reducció de la dimensionalitat de les imatges, la Transformada del Cosinus Discreta i una distància fraccional per realitzar les tasques de classificació de manera que el cost en temps de processament i de memòria es va reduir de forma significa. Prèviament a aquesta tasca de classificació, es proposa una selecció de les bandes de freqüències més rellevants, basat en la identificació i la maximització de les relacions d'independència per mitjà de criteris discriminabilitat, per tal d'optimitzar el conjunt del sistema. El sistema ha estat àmpliament avaluat sobre la base de dades de cara multiespectral, desenvolupada pel nostre propòsit. En aquest sentit s'ha suggerit l’ús d’un nou procediment de visualització per combinar diferents bandes per poder establir comparacions vàlides i donar informació estadística sobre el significat dels resultats. Aquest marc experimental ha permès més fàcilment la millora de la robustesa quan les condicions d’il·luminació eren diferents entre els processos d’entrament i test. De forma complementària, s’ha tractat la problemàtica de l’enfocament de les imatges en l'espectre tèrmic, en primer lloc, pel cas general de les imatges tèrmiques (o termogrames) i posteriorment pel cas concret dels termogrames facials, des dels punt de vista tant teòric com pràctic. En aquest sentit i per tal d'analitzar la qualitat d’aquests termogrames facials degradats per efectes de desenfocament, s'ha desenvolupat un últim algorisme. Els resultats experimentals recolzen fermament que la fusió d'imatges facials multiespectrals proposada assoleix un rendiment molt alt en diverses condicions d’il·luminació. Aquests resultats representen un nou avenç en l’aportació de solucions robustes quan es contemplen canvis en la il·luminació, i esperen poder inspirar a futures implementacions de sistemes de reconeixement facial precisos en escenaris no controlats.Postprint (published version

Recent Advances in Machine Learning Applied to Ultrasound Imaging

Machine learning (ML) methods are pervading an increasing number of fields of application because of their capacity to effectively solve a wide variety of challenging problems. The employment of ML techniques in ultrasound imaging applications started several years ago but the scientific interest in this issue has increased exponentially in the last few years. The present work reviews the most recent (2019 onwards) implementations of machine learning techniques for two of the most popular ultrasound imaging fields, medical diagnostics and non-destructive evaluation. The former, which covers the major part of the review, was analyzed by classifying studies according to the human organ investigated and the methodology (e.g., detection, segmentation, and/or classification) adopted, while for the latter, some solutions to the detection/classification of material defects or particular patterns are reported. Finally, the main merits of machine learning that emerged from the study analysis are summarized and discussed. © 2022 by the authors. Licensee MDPI, Basel, Switzerland

Non-intrusive measurement and hydrodynamics characterization of gas–solid fluidized beds: a review

Gas-solid fluidization is a well-established technique to suspend or transport particles and has been applied in a variety of industrial processes. Nevertheless, our knowledge of fluidization hydrodynamics is still limited for the design, scale-up and operation optimization of fluidized bed reactors. It is therefore essential to characterize the two-phase flow behaviours in gas-solid fluidized beds and monitor the fluidization processes for control and optimization. A range of non-intrusive techniques have been developed or proposed for measuring the fluidization dynamic parameters and monitoring the flow status without disturbing or distorting the flow fields. This paper presents a comprehensive review of the non-intrusive measurement techniques and the current state of knowledge and experience in the characterization and monitoring of gas-solid fluidized beds. These techniques are classified into six main categories as per sensing principles, electrostatic, acoustic emission and vibration, visualization, particle tracking, laser Doppler anemometry and phase Doppler anemometry as well as pressure fluctuation methods. Trend and future developments in this field are also discussed

Industrial Applications: New Solutions for the New Era

This book reprints articles from the Special Issue "Industrial Applications: New Solutions for the New Age" published online in the open-access journal Machines (ISSN 2075-1702). This book consists of twelve published articles. This special edition belongs to the "Mechatronic and Intelligent Machines" section

A Methodology to Develop Computer Vision Systems in Civil Engineering: Applications in Material Testing and Fish Tracking

[Resumen] La Visión Artificial proporciona una nueva y prometedora aproximación al campo de la Ingeniería Civil, donde es extremadamente importante medir con precisión diferentes procesos. Sin embargo, la Visión Artificial es un campo muy amplio que abarca multitud de técnicas y objetivos, y definir una aproximación de desarrollo sistemática es problemático. En esta tesis se propone una nueva metodología para desarrollar estos sistemas considerando las características y requisitos de la Ingeniería Civil. Siguiendo esta metodología se han desarrollado dos sistemas: Un sistema para la medición de desplazamientos y deformaciones en imágenes de ensayos de resistencia de materiales. Solucionando las limitaciones de los actuales sensores físicos que interfieren con el ensayo y solo proporcionan mediciones en un punto y una dirección determinada. Un sistema para la medición de la trayectoria de peces en escalas de hendidura vertical, con el que se pretende solucionar las carencias en el diseño de escalas obteniendo información sobre el comportamiento de los peces. Estas aplicaciones representan contribuciones significativas en el área, y demuestran que la metodología definida e implementada proporciona un marco de trabajo sistemático y confiable para el desarrollo de sistemas de Visión Artificial en Ingeniería Civil.[Resumo] A Visión Artificial proporciona unha nova e prometedora aproximación ó campo da Enxeñería Civil, onde é extremadamente importante medir con precisión diferentes procesos. Sen embargo, a Visión Artificial é un campo moi amplo que abarca multitude de técnicas e obxectivos, e definir unha aproximación de desenvolvemento sistemática é problemático. En esta tese proponse unha nova metodoloxía para desenvolver estes sistemas considerando as características e requisitos da Enxeñería Civil. Seguindo esta metodoloxía desenvolvéronse dous sistemas: Un sistema para a medición de desprazamentos e deformacións en imaxes de ensaios de resistencia de materiais. Solucionando as limitacións dos actuais sensores físicos que interfiren co ensaio e só proporcionan medicións nun punto e nunha dirección determinada. Un sistema para a medición da traxectoria de peixes en escalas de fenda vertical, co que se pretende solucionar as carencias no deseño de escalas obtendo información sobre o comportamento dos peixes. Estas aplicacións representan contribucións significativas na área, e demostran que a metodoloxía definida e implementada proporciona un marco de traballo sistemático e confiable para o desenvolvemento de sistemas de Visión Artificial en Enxeñería Civil.[Abstract] Computer Vision provides a new and promising approach to Civil Engineering, where it is extremely important to measure with accuracy real world processes. However, Computer Vision is a broad field, involving several techniques and topics, and the task of defining a systematic development approach is problematic. In this thesis a new methodology is carried out to develop these systems attending to the special characteristics and requirements of Civil Engineering. Following this methodology, two systems were developed: A system to measure displacements from real images of material surfaces taken during strength tests. This technique solves the limitation of current physical sensors, which interfere with the assay and which are limited to obtaining measurements in a single point of the material and in a single direction of the movement. A system to measure the trajectory of fishes in vertical slot fishways, whose purpose is to solve current lacks in the design of fishways by providing information of fish behavior. These applications represent significant contributions to the field and show that the defined and implemented methodology provides a systematic and reliable framework to develop a Computer Vision system in Civil Engineering

ReSCon '12, Research Student Conference: Book of Abstracts

The fifth SED Research Student Conference (ReSCon2012) was hosted over three days, 18-20 June 2012, in the Hamilton Centre at Brunel University. The conference consisted of 130 oral and 70 poster presentations, based on the high quality and diverse research being conducted within the School of Engineering and Design by postgraduate research students. The conference is held annually, and ReSCon plays a key role in contributing to research and innovations within the School

Microscopy and Analysis

Microscopes represent tools of the utmost importance for a wide range of disciplines. Without them, it would have been impossible to stand where we stand today in terms of understanding the structure and functions of organelles and cells, tissue composition and metabolism, or the causes behind various pathologies and their progression. Our knowledge on basic and advanced materials is also intimately intertwined to the realm of microscopy, and progress in key fields of micro- and nanotechnologies critically depends on high-resolution imaging systems. This volume includes a series of chapters that address highly significant scientific subjects from diverse areas of microscopy and analysis. Authoritative voices in their fields present in this volume their work or review recent trends, concepts, and applications, in a manner that is accessible to a broad readership audience from both within and outside their specialist area