Interconnect architectures for dynamically partially reconfigurable systems

Dynamically partially reconfigurable FPGAs (Field-Programmable Gate Arrays) allow hardware modules to be placed and removed at runtime while other parts of the system keep working. With their potential benefits, they have been the topic of a great deal of research over the last decade. To exploit the partial reconfiguration capability of FPGAs, there is a need for efficient, dynamically adaptive communication infrastructure that automatically adapts as modules are added to and removed from the system. Many bus and network-on-chip (NoC) architectures have been proposed to exploit this capability on FPGA technology. However, few realizations have been reported in the public literature to demonstrate or compare their performance in real world applications. While partial reconfiguration can offer many benefits, it is still rarely exploited in practical applications. Few full realizations of partially reconfigurable systems in current FPGA technologies have been published. More application experiments are required to understand the benefits and limitations of implementing partially reconfigurable systems and to guide their further development. The motivation of this thesis is to fill this research gap by providing empirical evidence of the cost and benefits of different interconnect architectures. The results will provide a baseline for future research and will be directly useful for circuit designers who must make a well-reasoned choice between the alternatives. This thesis contains the results of experiments to compare different NoC and bus interconnect architectures for FPGA-based designs in general and dynamically partially reconfigurable systems. These two interconnect schemes are implemented and evaluated in terms of performance, area and power consumption using FFT (Fast Fourier Transform) andANN(Artificial Neural Network) systems as benchmarks. Conclusions drawn from these results include recommendations concerning the interconnect approach for different kinds of applications. It is found that a NoC provides much better performance than a single channel bus and similar performance to a multi-channel bus in both parallel and parallel-pipelined FFT systems. This suggests that a NoC is a better choice for systems with multiple simultaneous communications like the FFT. Bus-based interconnect achieves better performance and consume less area and power than NoCbased scheme for the fully-connected feed-forward NN system. This suggests buses are a better choice for systems that do not require many simultaneous communications or systems with broadcast communications like a fully-connected feed-forward NN. Results from the experiments with dynamic partial reconfiguration demonstrate that buses have the advantages of better resource utilization and smaller reconfiguration time and memory than NoCs. However, NoCs are more flexible and expansible. They have the advantage of placing almost all of the communication infrastructure in the dynamic reconfiguration region. This means that different applications running on the FPGA can use different interconnection strategies without the overhead of fixed bus resources in the static region. Another objective of the research is to examine the partial reconfiguration process and reconfiguration overhead with current FPGA technologies. Partial reconfiguration allows users to efficiently change the number of running PEs to choose an optimal powerperformance operating point at the minimum cost of reconfiguration. However, this brings drawbacks including resource utilization inefficiency, power consumption overhead and decrease in system operating frequency. The experimental results report a 50% of resource utilization inefficiency with a power consumption overhead of less than 5% and a decrease in frequency of up to 32% compared to a static implementation. The results also show that most of the drawbacks of partial reconfiguration implementation come from the restrictions and limitations of partial reconfiguration design flow. If these limitations can be addressed, partial reconfiguration should still be considered with its potential benefits.Thesis (Ph.D.) -- University of Adelaide, School of Electrical and Electronic Engineering, 201

Adaptation of High Performance and High Capacity Reconfigurable Systems to OpenCL Programming Environments

[EN] In this work, we adapt a reconfigurable computer system based on FPGA technologies to OpenCL programming environments. The reconfigurable system is part of a compute prototype of the MANGO European project that includes 96 FPGAs. To optimize the use and to obtain its maximum performance, it is essential to adapt it to heterogeneous systems programming environments such as OpenCL, which simplifies its programming. In this work, all the necessary activities for correct implementation of the software and hardware layer required for its use in OpenCL will be carried out, as well as an evaluation of the performance obtained and the flexibility offered by the solution provided. This work has been performed during an internship of 5 months. The internship is linked to an agreement between UPV and UniNa (Università degli Studi di Napoli Federico II).[ES] En este trabajo se va a realizar la adaptación de un sistema reconfigurable de cómputo basado en tecnologías de FPGAs hacia entornos de programación en OpenCL. El sistema reconfigurable forma parte de un prototipo de cálculo del proyecto Europeo MANGO que incluye 96 FPGAs. Con el fin de optimizar el uso y de obtener sus máximas prestaciones, se hace imprescindible una adaptación a entornos de programación de sistemas heterogéneos como OpenCL, lo cual simplifica su programación y uso. En este trabajo se realizarán todas las actividades necesarias para una correcta implementación de la capa software y hardware necesaria para su uso en OpenCL así como una evaluación de las prestaciones obtenidas y de la flexibilidad ofrecida por la solución aportada. Este trabajo se ha llevado a término durante una estancia de cinco meses en la Universitat Politécnica de Valéncia. Esta estancia está vinculada a un acuerdo entre la Universitat Politécnica de Valéncia y la Università degli Studi di Napoli Federico IIRusso, D. (2020). Adaptation of High Performance and High Capacity Reconfigurable Systems to OpenCL Programming Environments. http://hdl.handle.net/10251/150393TFG

From a FPGA Prototyping Platform to a Computing Platform: The MANGO Experience

[EN] In this paper we describe the evolution of the FPGA-based prototype deployed in the MANGO project, from a hardware prototyping platform of HPC architectures to a computing platform targeting HPC and AI applications. Our main goal is to reinvest on the MANGO cluster by providing a duality in its use for both large-scale hardware prototyping and highperformance computation. From our experience we can reach several interesting conclusions about the complexities and hurdles that lay below FPGA technologies, and therefore, shedding some light onto the real complexities that difficult the adoption of FPGAs on either large-scale pure HPC systems or on hybrid systems (HPC + BigData/Ai).This work is supported by the European Commission through RECIPE and DeepHealth projects, under the Horizon 2020 program, grant number 801137 and 825111, respectively.Flich Cardo, J.; Tornero-Gavilá, R.; Rodríguez, D.; Russo, D.; Martínez Martínez, JM.; Hernández Luz, C. (2021). From a FPGA Prototyping Platform to a Computing Platform: The MANGO Experience. IEEE. 1-6. https://doi.org/10.23919/DATE51398.2021.94740511