Flip-OFDM for Optical Wireless Communications

We consider two uniploar OFDM techniques for optical wireless communications: asymmetric clipped optical OFDM (ACO-OFDM) and Flip-OFDM. Both techniques can be used to compensate multipath distortion effects in optical wireless channels. However, ACO-OFDM has been widely studied in the literature, while the performance of Flip-OFDM has never been investigated. In this paper, we conduct the performance analysis of Flip-OFDM and propose additional modification to the original scheme in order to compare the performance of both techniques. Finally, it is shown by simulation that both techniques have the same performance but different hardware complexities. In particular, for slow fading channels, Flip-OFDM offers 50% saving in hardware complexity over ACO-OFDM at the receiver.Comment: published in IEEE Information Theory Workshop, Paraty Brazil, Sept 201

Coded Index Modulation for Non-DC-Biased OFDM in Multiple LED Visible Light Communication

Use of multiple light emitting diodes (LED) is an attractive way to increase spectral efficiency in visible light communications (VLC). A non-DC-biased OFDM (NDC OFDM) scheme that uses two LEDs has been proposed in the literature recently. NDC OFDM has been shown to perform better than other OFDM schemes for VLC like DC-biased OFDM (DCO OFDM) and asymmetrically clipped OFDM (ACO OFDM) in multiple LEDs settings. In this paper, we propose an efficient multiple LED OFDM scheme for VLC which uses {\em coded index modulation}. The proposed scheme uses two transmitter blocks, each having a pair of LEDs. Within each block, NDC OFDM signaling is done. The selection of which block is activated in a signaling interval is decided by information bits (i.e., index bits). In order to improve the reliability of the index bits at the receiver (which is critical because of high channel correlation in multiple LEDs settings), we propose to use coding on the index bits alone. We call the proposed scheme as CI-NDC OFDM (coded index NDC OFDM) scheme. Simulation results show that, for the same spectral efficiency, CI-NDC OFDM that uses LDPC coding on the index bits performs better than NDC OFDM

Performance analysis of modified asymmetrically-clipped optical orthogonal frequency-division multiplexing systems

A modification to the Asymmetrically-Clipped Optical Orthogonal Frequency-Division Multiplexing (ACO-OFDM) technique is proposed through unipolar encoding. A performance analysis of the Bit Error Rate (BER) is developed and Monte Carlo simulations are carried out to verify the analysis. Results are compared to that of the corresponding ACO-OFDM system under the same bit energy and transmission rate; an improvement of 1 dB is obtained at a BER of 10-4. In addition, the performance of the proposed system in the presence of atmospheric turbulence is investigated using single-input multiple-output (SIMO) configuration and its performance under that environment is compared to that of ACO-OFDM. Energy improvements of 4 dB and 2.2 dB are obtained at a BER of 10-4 for SIMO systems of 1 and 2 photodetectors at the receiver for the case of strong turbulence, respectively

EVM and Achievable Data Rate Analysis of Clipped OFDM Signals in Visible Light Communication

Orthogonal frequency division multiplexing (OFDM) has been considered for visible light communication (VLC) thanks to its ability to boost data rates as well as its robustness against frequency-selective fading channels. A major disadvantage of OFDM is the large dynamic range of its time-domain waveforms, making OFDM vulnerable to nonlinearity of light emitting diodes (LEDs). DC biased optical OFDM (DCO-OFDM) and asymmetrically clipped optical OFDM (ACO-OFDM) are two popular OFDM techniques developed for the VLC. In this paper, we will analyze the performance of the DCO-OFDM and ACO-OFDM signals in terms of error vector magnitude (EVM), signal-to-distortion ratio (SDR), and achievable data rates under both average optical power and dynamic optical power constraints. EVM is a commonly used metric to characterize distortions. We will describe an approach to numerically calculate the EVM for DCO-OFDM and ACO-OFDM. We will derive the optimum biasing ratio in the sense of minimizing EVM for DCO-OFDM. Additionally, we will formulate the EVM minimization problem as a convex linear optimization problem and obtain an EVM lower bound against which to compare the DCO-OFDM and ACO-OFDM techniques. We will prove that the ACO-OFDM can achieve the lower bound. Average optical power and dynamic optical power are two main constraints in VLC. We will derive the achievable data rates under these two constraints for both additive white Gaussian noise (AWGN) channel and frequency-selective channel. We will compare the performance of DCO-OFDM and ACO-OFDM under different power constraint scenarios

Visible light communication using new Flip-FBMC modulation system technique

Filter bank multi-carrier (FBMC) modulation in the visible light communication (VLC) system is one of the most promising modulation systems in optical wireless communications (OWC), especially in 5G and 6G future applications. FBMC has a wide bandwidth compared to other modulation systems. One of the highest degree essential conditions for utilising the signal in VLC is that the signal is real positive, the signal is agreeable with intensity modulation/direct detection (IM/DD), where Hermitian symmetry (H.S) is utilised to get a real signal (RE) and to be unipolar direct current (DC)-bias is used. Here the challenge arises as this method increases complicating, due to the modulation of the N number of frequency symbols, these symbols need 2N inverse fast fourier transform (IFFT) and fast fourier transform (FFT), in addition to energy consumption. This research focused on the time domain and not the frequency domain by using the traditional complex FBMC generation signal, and to obtain the RE signal by placing the RE signal side by side with the imaginary signal (IMs) in a row, and then using new Flip-FBMC technology, which saves more energy. The proposed technologies provide approximately 57% of the number of IFFT/FFT. The use of Flip-FBMC technology consumes less energy than traditional technologies with better bit error rate (BER) performance

OFDM Systems for Optical Communication with Intensity Modulation and Direct Detection

Intensity modulation and direct detection (IM/DD) is a cost-effective optical communication strategy which finds wide applications in fiber communication, free-space optical communication, and indoor visible light communication. In IM/DD, orthogonal frequency division multiplexing (OFDM), originally employed in radio frequency communication, is considered as a strong candidate solution to combat with channel distortions. In this research, we investigate various potential OFDM forms that are suitable for IM/DD channel. We will elaborate the design principles of different OFDM transmitters and investigate different types of receivers including the proposed iterative receiver. In addition, we will analyze the spectral efficiency and decoding complexities of different OFDM systems to give a whole picture of their performance. Finally, simulation results are given to assess the detection performance of different receivers