Proposal of a health care network based on big data analytics for PDs

Health care networks for Parkinson's disease (PD) already exist and have been already proposed in the literature, but most of them are not able to analyse the vast volume of data generated from medical examinations and collected and organised in a pre-defined manner. In this work, the authors propose a novel health care network based on big data analytics for PD. The main goal of the proposed architecture is to support clinicians in the objective assessment of the typical PD motor issues and alterations. The proposed health care network has the ability to retrieve a vast volume of acquired heterogeneous data from a Data warehouse and train an ensemble SVM to classify and rate the motor severity of a PD patient. Once the network is trained, it will be able to analyse the data collected during motor examinations of a PD patient and generate a diagnostic report on the basis of the previously acquired knowledge. Such a diagnostic report represents a tool both to monitor the follow up of the disease for each patient and give robust advice about the severity of the disease to clinicians

MULTI-ROBOT COVERAGE WITH DYNAMIC COVERAGE INFORMATION COMPRESSION

This work considers the problem of coverage of an initially unknown environment by a set of autonomous robots. A crucial aspect in multi-robot coverage involves robots sharing information about the regions they have already covered at certain intervals, so that multiple robots can avoid repeated coverage of the same area. However, sharing the coverage information between robots imposes considerable communication and computation overhead on each robot, which increases the robots’ battery usage and overall coverage time. To address this problem, we explore a novel coverage technique where robots use an information compression algorithm before sharing their coverage maps with each other. Specifically, we use a polygonal approximation algorithm to represent any arbitrary region covered by a robot as a polygon with a fixed, small number of vertices. At certain intervals, each robot then sends this small set of vertices to other robots in its communication range as its covered area, and each receiving robot records this information in a local map of covered regions so that it can avoid repeat coverage. The coverage information in the map is then utilized by a technique called spanning tree coverage (STC) by each robot to perform area coverage. We have verified the performance of our algorithm on simulated Coroware Corobot robots within the Webots robot simulator with different sizes of environments and different types of obstacles in the environments, while modelling sensor noise from the robots’ sensors. Our results show that using the polygonal compression technique is an effective way to considerably reduce data transfer between robots in a multi-robot team without sacrificing the performance and efficiency gains that communication provides to such a system

Machine Learning Meets Advanced Robotic Manipulation

Automated industries lead to high quality production, lower manufacturing cost and better utilization of human resources. Robotic manipulator arms have major role in the automation process. However, for complex manipulation tasks, hard coding efficient and safe trajectories is challenging and time consuming. Machine learning methods have the potential to learn such controllers based on expert demonstrations. Despite promising advances, better approaches must be developed to improve safety, reliability, and efficiency of ML methods in both training and deployment phases. This survey aims to review cutting edge technologies and recent trends on ML methods applied to real-world manipulation tasks. After reviewing the related background on ML, the rest of the paper is devoted to ML applications in different domains such as industry, healthcare, agriculture, space, military, and search and rescue. The paper is closed with important research directions for future works

Decentralized algorithm of dynamic task allocation for a swarm of homogeneous robots

The current trends in the robotics field have led to the development of large-scale swarm robot systems, which are deployed for complex missions. The robots in these systems must communicate and interact with each other and with their environment for complex task processing. A major problem for this trend is the poor task planning mechanism, which includes both task decomposition and task allocation. Task allocation means to distribute and schedule a set of tasks to be accomplished by a group of robots to minimize the cost while satisfying operational constraints. Task allocation mechanism must be run by each robot, which integrates the swarm whenever it senses a change in the environment to make sure the robot is assigned to the most appropriate task, if not, the robot should reassign itself to its nearest task. The main contribution in this thesis is to maximize the overall efficiency of the system by minimizing the total time needed to accomplish the dynamic task allocation problem. The near-optimal allocation schemes are found using a novel hybrid decentralized algorithm for a dynamic task allocation in a swarm of homogeneous robots, where the number of the tasks is more than the robots present in the system. This hybrid approach is based on both the Simulated Annealing (SA) optimization technique combined with the Discrete Particle Swarm Optimization (DPSO) technique. Also, another major contribution in this thesis is the formulation of the dynamic task allocation equations for the homogeneous swarm robotics using integer linear programming and the cost function and constraints are introduced for the given problem. Then, the DPSO and SA algorithms are developed to accomplish the task in a minimal time. Simulation is implemented using only two test cases via MATLAB. Simulation results show that PSO exhibits a smaller and more stable convergence characteristics and SA technique owns a better quality solution. Then, after developing the hybrid algorithm, which combines SA with PSO, simulation instances are extended to include fifteen more test cases with different swarm dimensions to ensure the robustness and scalability of the proposed algorithm over the traditional PSO and SA optimization techniques. Based on the simulation results, the hybrid DPSO/SA approach proves to have a higher efficiency in both small and large swarm sizes than the other traditional algorithms such as Particle Swarm Optimization technique and Simulated Annealing technique. The simulation results also demonstrate that the proposed approach can dislodge a state from a local minimum and guide it to the global minimum. Thus, the contributions of the proposed hybrid DPSO/SA algorithm involve possessing both the pros of high quality solution in SA and the fast convergence time capability in PSO. Also, a parameters\u27 selection process for the hybrid algorithm is proposed as a further contribution in an attempt to enhance the algorithm efficiency because the heuristic optimization techniques are very sensitive to any parameter changes. In addition, Verification is performed to ensure the effectiveness of the proposed algorithm by comparing it with results of an exact solver in terms of computational time, number of iterations and quality of solution. The exact solver that is used in this research is the Hungarian algorithm. This comparison shows that the proposed algorithm gives a superior performance in almost all swarm sizes with both stable and small execution time. However, it also shows that the proposed hybrid algorithm\u27s cost values which is the distance traveled by the robots to perform the tasks are larger than the cost values of the Hungarian algorithm but the execution time of the hybrid algorithm is much better. Finally, one last contribution in this thesis is that the proposed algorithm is implemented and extensively tested in a real experiment using a swarm of 4 robots. The robots that are used in the real experiment called Elisa-III robots

Managing a Fleet of Autonomous Mobile Robots (AMR) using Cloud Robotics Platform

In this paper, we provide details of implementing a system for managing a fleet of autonomous mobile robots (AMR) operating in a factory or a warehouse premise. While the robots are themselves autonomous in its motion and obstacle avoidance capability, the target destination for each robot is provided by a global planner. The global planner and the ground vehicles (robots) constitute a multi agent system (MAS) which communicate with each other over a wireless network. Three different approaches are explored for implementation. The first two approaches make use of the distributed computing based Networked Robotics architecture and communication framework of Robot Operating System (ROS) itself while the third approach uses Rapyuta Cloud Robotics framework for this implementation. The comparative performance of these approaches are analyzed through simulation as well as real world experiment with actual robots. These analyses provide an in-depth understanding of the inner working of the Cloud Robotics Platform in contrast to the usual ROS framework. The insight gained through this exercise will be valuable for students as well as practicing engineers interested in implementing similar systems else where. In the process, we also identify few critical limitations of the current Rapyuta platform and provide suggestions to overcome them.Comment: 14 pages, 15 figures, journal pape

Towards a cyber physical system for personalised and automatic OSA treatment

Obstructive sleep apnea (OSA) is a breathing disorder that takes place in the course of the sleep and is produced by a complete or a partial obstruction of the upper airway that manifests itself as frequent breathing stops and starts during the sleep. The real-time evaluation of whether or not a patient is undergoing OSA episode is a very important task in medicine in many scenarios, as for example for making instantaneous pressure adjustments that should take place when Automatic Positive Airway Pressure (APAP) devices are used during the treatment of OSA. In this paper the design of a possible Cyber Physical System (CPS) suited to real-time monitoring of OSA is described, and its software architecture and possible hardware sensing components are detailed. It should be emphasized here that this paper does not deal with a full CPS, rather with a software part of it under a set of assumptions on the environment. The paper also reports some preliminary experiments about the cognitive and learning capabilities of the designed CPS involving its use on a publicly available sleep apnea database

Architecture and Design of Medical Processor Units for Medical Networks

This paper introduces analogical and deductive methodologies for the design medical processor units (MPUs). From the study of evolution of numerous earlier processors, we derive the basis for the architecture of MPUs. These specialized processors perform unique medical functions encoded as medical operational codes (mopcs). From a pragmatic perspective, MPUs function very close to CPUs. Both processors have unique operation codes that command the hardware to perform a distinct chain of subprocesses upon operands and generate a specific result unique to the opcode and the operand(s). In medical environments, MPU decodes the mopcs and executes a series of medical sub-processes and sends out secondary commands to the medical machine. Whereas operands in a typical computer system are numerical and logical entities, the operands in medical machine are objects such as such as patients, blood samples, tissues, operating rooms, medical staff, medical bills, patient payments, etc. We follow the functional overlap between the two processes and evolve the design of medical computer systems and networks.Comment: 17 page