Configurable and Scalable Turbo Decoder for 4G Wireless Receivers

The increasing requirements of high data rates and quality of service (QoS) in fourth-generation (4G) wireless communication require the implementation of practical capacity approaching codes. In this chapter, the application of Turbo coding schemes that have recently been adopted in the IEEE 802.16e WiMax standard and 3GPP Long Term Evolution (LTE) standard are reviewed. In order to process several 4G wireless standards with a common hardware module, a reconfigurable and scalable Turbo decoder architecture is presented. A parallel Turbo decoding scheme with scalable parallelism tailored to the target throughput is applied to support high data rates in 4G applications. High-level decoding parallelism is achieved by employing contention-free interleavers. A multi-banked memory structure and routing network among memories and MAP decoders are designed to operate at full speed with parallel interleavers. A new on-line address generation technique is introduced to support multiple Turbo interleaving patterns, which avoids the interleaver address memory that is typically necessary in the traditional designs. Design trade-offs in terms of area and power efficiency are analyzed for different parallelism and clock frequency goals

A survey of digital television broadcast transmission techniques

This paper is a survey of the transmission techniques used in digital television (TV) standards worldwide. With the increase in the demand for High-Definition (HD) TV, video-on-demand and mobile TV services, there was a real need for more bandwidth-efficient, flawless and crisp video quality, which motivated the migration from analogue to digital broadcasting. In this paper we present a brief history of the development of TV and then we survey the transmission technology used in different digital terrestrial, satellite, cable and mobile TV standards in different parts of the world. First, we present the Digital Video Broadcasting standards developed in Europe for terrestrial (DVB-T/T2), for satellite (DVB-S/S2), for cable (DVB-C) and for hand-held transmission (DVB-H). We then describe the Advanced Television System Committee standards developed in the USA both for terrestrial (ATSC) and for hand-held transmission (ATSC-M/H). We continue by describing the Integrated Services Digital Broadcasting standards developed in Japan for Terrestrial (ISDB-T) and Satellite (ISDB-S) transmission and then present the International System for Digital Television (ISDTV), which was developed in Brazil by adopteding the ISDB-T physical layer architecture. Following the ISDTV, we describe the Digital Terrestrial television Multimedia Broadcast (DTMB) standard developed in China. Finally, as a design example, we highlight the physical layer implementation of the DVB-T2 standar

A survey of FPGA-based LDPC decoders

Low-Density Parity Check (LDPC) error correction decoders have become popular in communications systems, as a benefit of their strong error correction performance and their suitability to parallel hardware implementation. A great deal of research effort has been invested into LDPC decoder designs that exploit the flexibility, the high processing speed and the parallelism of Field-Programmable Gate Array (FPGA) devices. FPGAs are ideal for design prototyping and for the manufacturing of small-production-run devices, where their in-system programmability makes them far more cost-effective than Application-Specific Integrated Circuits (ASICs). However, the FPGA-based LDPC decoder designs published in the open literature vary greatly in terms of design choices and performance criteria, making them a challenge to compare. This paper explores the key factors involved in FPGA-based LDPC decoder design and presents an extensive review of the current literature. In-depth comparisons are drawn amongst 140 published designs (both academic and industrial) and the associated performance trade-offs are characterised, discussed and illustrated. Seven key performance characteristics are described, namely their processing throughput, latency, hardware resource requirements, error correction capability, processing energy efficiency, bandwidth efficiency and flexibility. We offer recommendations that will facilitate fairer comparisons of future designs, as well as opportunities for improving the design of FPGA-based LDPC decoder

VLSI implementation of a multi-mode turbo/LDPC decoder architecture

Flexible and reconfigurable architectures have gained wide popularity in the communications field. In particular, reconfigurable architectures for the physical layer are an attractive solution not only to switch among different coding modes but also to achieve interoperability. This work concentrates on the design of a reconfigurable architecture for both turbo and LDPC codes decoding. The novel contributions of this paper are: i) tackling the reconfiguration issue introducing a formal and systematic treatment that, to the best of our knowledge, was not previously addressed; ii) proposing a reconfigurable NoCbased turbo/LDPC decoder architecture and showing that wide flexibility can be achieved with a small complexity overhead. Obtained results show that dynamic switching between most of considered communication standards is possible without pausing the decoding activity. Moreover, post-layout results show that tailoring the proposed architecture to the WiMAX standard leads to an area occupation of 2.75 mm2 and a power consumption of 101.5 mW in the worst case

Applications of satellite technology to broadband ISDN networks

Two satellite architectures for delivering broadband integrated services digital network (B-ISDN) service are evaluated. The first is assumed integral to an existing terrestrial network, and provides complementary services such as interconnects to remote nodes as well as high-rate multicast and broadcast service. The interconnects are at a 155 Mbs rate and are shown as being met with a nonregenerative multibeam satellite having 10-1.5 degree spots. The second satellite architecture focuses on providing private B-ISDN networks as well as acting as a gateway to the public network. This is conceived as being provided by a regenerative multibeam satellite with on-board ATM (asynchronous transfer mode) processing payload. With up to 800 Mbs offered, higher satellite EIRP is required. This is accomplished with 12-0.4 degree hopping beams, covering a total of 110 dwell positions. It is estimated the space segment capital cost for architecture one would be about $190M whereas the second architecture would be about$250M. The net user cost is given for a variety of scenarios, but the cost for 155 Mbs services is shown to be about $15-22/minute for 25 percent system utilization

Towards a reconfigurable hardware architecture for implementing a LDPC module suitable for software radio systems

Forward Error Correction is a key piece in modern digital communications. When a signal is transmitted over a noisy channel, multiple errors are generated. FEC techniques are directed towards the recovery of such errors. In last years, LDPC (Low Density Parity Check) codes have attracted attention of researchers because of their excellent error correction capabilities, but for actual radios high performance is not enough since they require to communicate with other multiple radios too. In general, communication between multiple radios requires the use of different standards. In this sense, Software Defined Radio (SDR) approach allows building multi standard radios based on reconfigurability abilities which means that base components including recovery errors block must provide reconfigurable options. In this paper, some open problems in designing and implementing reconfigurable LDPC components are presented and discussed. Some features of works in the state of the art are commented and possible research lines proposed

A Vision for 5G Channel Coding

Channel coding is a vital but complex component of cellular communication systems, which is used for correcting the communication errors that are caused by noise, interference and poor signal strength. The turbo code was selected as the main channel code in 3G and 4G cellular systems, but the 3GPP standardization group is currently debating whether it should be replaced by the Low Density Parity Check (LDPC) code in 5G. This debate is being driven by the requirements for 5G, which include throughputs of up to 20 Gbps in the downlink to user devices, ultra-low latencies, as well as much greater flexibility to support diverse use-cases, including broadband data, Internet of Things (IoT), vehicular communications and cloud computing. In our previous white paper, we demonstrated that flexible turbo codes can achieve these requirements with superior hardware- and energy-efficiencies than flexible LDPC decoders. However, the proponents of LDPC codes have highlighted that inflexible LDPC decoders can achieve throughputs of 20 Gbps with particularly attractive hardware- and energy- efficiencies. This white paper outlines a vision for 5G, in which channel coding is provided by a flexible turbo code for most use-cases, but which is supported by an inflexible LDPC code for 20 Gbps downlink use-cases, such as fixed wireless broadband. We demonstrate that this approach can meet all of the 5G requirements, while offering hardware- and energy-efficiencies that are significantly better than those of an LDPC-only solution. Furthermore, the proposed approach benefits from synergy with the 3G and 4G turbo code, as well as a significantly faster time-to-market for 5G. These benefits translate to a 5G that is significantly more capable, significantly easier to deploy and significantly lower cost

Development of Simulation Components for Wireless Communication

abstract: This thesis work present the simulation of Bluetooth and Wi-Fi radios in real life interference environments. When information is transmitted via communication channels, data may get corrupted due to noise and other channel discrepancies. In order to receive the information safely and correctly, error correction coding schemes are generally employed during the design of communication systems. Usually the simulations of wireless communication systems are done in such a way that they focus on some aspect of communications and neglect the others. The simulators available currently will either do network layer simulations or physical layer level simulations. In many situations, simulations are required which show inter-layer aspects of communication systems. For all such scenarios, a simulation environment, WiscaComm which is based on time-domain samples is built. WiscaComm allows the study of network and physical layer interactions in detail. The advantage of time domain sampling is that it allows the simulation of different radios together which is better than the complex baseband representation of symbols. The environment also supports study of multiple protocols operating simultaneously, which is of increasing importance in today's environment.Dissertation/ThesisMasters Thesis Electrical Engineering 201