Using a cognitive prosthesis to assist foodservice managerial decision-making

The artificial intelligence community has been notably unsuccessful in producing intelligent agents that think for themselves. However, there is an obvious need for increased information processing power in real life situations. An example of this can be witnessed in the training of a foodservice manager, who is expected to solve a wide variety of complex problems on a daily basis. This article explores the possibility of creating an intelligence aid, rather than an intelligence agent, to assist novice foodservice managers in making decisions that are congruent with a subject matter expert\u27s decision schema

A preliminary study of flat-panel displays

Six display technologies that might be of future value in a spacelab workstation are discussed. Some have been developed to the point where they could be used as a computer display while others have not. The display technologies studied are electroluminescents, light-emitting didodes, gas plasma, liquid crystal, electrochromic, and electrophoretic. An explanation of each mechanism is provided along with the state-of-the-art development

Flight telerobotic servicer control from the Orbiter

The research and work conducted on the development of a testbed for a display and control panel for the Flight Telerobotic Servicer (FTS) are presented. Research was conducted on both software and hardware needed to control the FTS. A breadboard was constructed and placed into a mockup of the aft station of the Orbiter spacecraft. This breadboard concept was then evaluated using a computer graphics representation of the Tinman FTS. Extensive research was conducted on the software requirements and implementation. The hardware selected for the breadboard was 'flight like' and in some cases fit and function evaluated. The breadboard team studied some of the concepts without pursuing in depth their impact on the Orbiter or other missions. Assumptions are made concerning payload integration

Charakterizace tenkovrstvých elektroluminiscenčních součástek

Jádrem této disertační práce bylo studovat optické a elektrické charakteristiky tenkovrstvých elektroluminiscenčních součástek řízených střídavým proudem (ACTFEL) a zejména vliv procesu stárnutí luminiforů na jejich optické a elektrické vlastnosti. Cílem této studie měl být příspěvek ke zvýšení celkové účinnosti luminoforů, vyjádřené pomocí jasu, účinnosti a stability. Vzhledem k tomu, že současnou dominantní technologií plochých obrazovek je LCD, musí se další alternativní technologie plošných displejů porovnávat s LCD. Výhodou ACTFEL displejů proti LCD je lepší rozlišení, větší teplotní rozsah činnosti, větší čtecí úhel, či možnost čtení při mnohem vyšší intenzitě pozadí. Na druhou stranu je jejich nevýhodou vyšší energetická náročnost, problém s odpovídající barevností tří základních barev a podstatně vyšší napětí nutné pro činnost displeje. K dosažení tohoto cíle jsme provedli optická, elektrická a optoelektrická měření ACTFEL struktur a ZnS:Mn luminoforů. Navíc jsme studovali vliv dotování vrstvy pomocí KCl na chování mikrostruktury a na elektroluminiscenční vlastnosti (zejména na jas a světelnou účinnost) ZnS:Mn luminoforů. Provedli jsme i některá, ne zcela obvyklá, měření ACTFEL součástek. Vypočítali jsme i rozptylový poměr nabitých barevných center a simulovali transportní charakteristiky v ACTFEL součástkách. Studovali jsme vliv stárnutí dvou typů ZnS:Mn luminoforů (s vrstvou napařenou či získanou pomocí epitaxe atomových vrstev) monitorováním závislostí svítivost-napětí (L-V), velikost vnitřního náboje - elektrické pole luminoforu (Q-Fp) a kapacitance-napětí (C-V) ve zvolených časových intervalech v průběhu stárnutí. Provedli jsme krátkodobá i dlouhodobá měření a pokusili jsme se i o vizualizaci struktury luminoforu se subvlnovým rozlišením pomocí optického rastrovacího mikroskopu pracujícího v blízkém poli (SNOM). Na praktickém případu zeleného Zn2GeO4:Mn (2% Mn) ACTFEL displeje, pracujícího při 50 Hz, jsme také studovali stabilitu svítivosti pomocí měření závislosti svítivosti na napětí (L-V) a světelné účinnosti na napětí (eta-V). Přitom byl zhodnocen význam těchto charakteristik. Nezanedbatelnou a neoddělitelnou součástí této práce je i její pedagogický aspekt. Předložený text by mohl být využit i jako učebnice pro studenty na mé univerzitě v Lybii.The objective of this thesis is to study the optical and electrical characterization of Alternating-Current Thin-Film ElectroLuminescent (ACTFEL) devices, and specifically the aging process of phosphor materials that comprise the ACTFEL display in an effort to improve the overall performance of the primary phosphor colors in terms of brightness, efficiency and stability. Since the dominant flat-panel display technology is the LCD, an alternative flat-panel display technology must gauge itself in terms of the LCD. The advantages of ACTFEL displays in comparison with LCDs are the ability to pattern much smaller pixel, performance over a wider temperature range, full-viewing angle, and readability with much greater intensity background light. The disadvantages of ACTFEL displays against LCD ones are larger power consumption, lack of adequate chromaticity of the three primary colors, and much larger driving voltages. To achieve these objectives, the optical, electrical, and opto-electric measurements of the ACTFEL structures and ZnS:Mn phosphor hosts were carried out. Moreover, the effect of KCl co-doping on the microstructure and the electroluminescent properties (mainly brightness and luminous efficiency) of ZnS:Mn phosphors has been investigated, too. A non-common electrical characterization of ACTFEL devices has also been provided. We also calculated charged center scattering rates, and simulated the electron transport process in an ACTFEL device The study of the aging characteristics of evaporated and atomic layer epitaxy ZnS:Mn phosphors has been undertaken by monitoring the luminance-voltage (L-V) internal charge-phosphor field (Q-Fp) and capacitance-voltage (C-V) electrical characteristics at in selected time intervals during aging. Short-term and long-term ACTFEL aging studies has been provided and an attempt to visualize locally the structure of phosphor with a subwavelenght resolution using Scanning near-field optical microscope (SNOM) has also been presented. The practical case of a green Zn2GeO4:Mn (2% Mn) ACTFEL device operated at 50 Hz was studied and a luminance stability by a measurement of luminance-voltage (L-V) and luminous efficiency-voltage (eta-V) characteristics has been evaluated. A non-negligible and indiscreptible task of this thesis was also its pedagogical aspect. Therefore, the presented text can be considered as a textbook suitable for our students in Libya.

Assessment of cockpit interface concepts for data link retrofit

The problem is examined of retrofitting older generation aircraft with data link capability. The approach taken analyzes requirements for the cockpit interface, based on review of prior research and opinions obtained from subject matter experts. With this background, essential functions and constraints for a retrofit installation are defined. After an assessment of the technology available to meet the functions and constraints, candidate design concepts are developed. The most promising design concept is described in detail. Finally, needs for further research and development are identified

Zero-G Workstation Design

Zero-g workstations were designed throughout manned spaceflight, based on different criteria and requirements for different programs. The history of design of these workstations is presented along with a thorough evaluation of selected Skylab workstations (the best zero-g experience available on the subject). The results were applied to on-going and future programs, with special emphasis on the correlation of neutral body posture in zero-g to workstation design. Where selected samples of shuttle orbiter workstations are shown as currently designed and compared to experience gained during prior programs in terms of man machine interface design, the evaluations were done in a generic sense to show the methods of applying evaluative techniques

Microsystems technology: objectives

This contribution focuses on the objectives of microsystems technology (MST). The reason for this is two fold. First of all, it should explain what MST actually is. This question is often posed and a simple answer is lacking, as a consequence of the diversity of subjects that are perceived as MST. The second reason is that a map of the somewhat chaotic field of MST is needed to identify sub-territories, for which standardization in terms of system modules an interconnections is feasible. To define the objectives a pragmatic approach has been followed. From the literature a selection of topics has been chosen and collected that are perceived as belonging to the field of MST by a large community of workers in the field (more than 250 references). In this way an overview has been created with `applications¿ and `generic issues¿ as the main characteristics

Crew interface with a telerobotic control station

A method for apportioning crew-telerobot tasks has been derived to facilitate the design of a crew-friendly telerobot control station. To identify the most appropriate state-of-the-art hardware for the control station, task apportionment must first be conducted to identify if an astronaut or a telerobot is best to execute the task and which displays and controls are required for monitoring and performance. Basic steps that comprise the task analysis process are: (1) identify space station tasks; (2) define tasks; (3) define task performance criteria and perform task apportionment; (4) verify task apportionment; (5) generate control station requirements; (6) develop design concepts to meet requirements; and (7) test and verify design concepts