Disaggregating non-volatile memory for throughput-oriented genomics workloads

Massive exploitation of next-generation sequencing technologies requires dealing with both: huge amounts of data and complex bioinformatics pipelines. Computing architectures have evolved to deal with these problems, enabling approaches that were unfeasible years ago: accelerators and Non-Volatile Memories (NVM) are becoming widely used to enhance the most demanding workloads. However, bioinformatics workloads are usually part of bigger pipelines with different and dynamic needs in terms of resources. The introduction of Software Defined Infrastructures (SDI) for data centers provides roots to dramatically increase the efficiency in the management of infrastructures. SDI enables new ways to structure hardware resources through disaggregation, and provides new hardware composability and sharing mechanisms to deploy workloads in more flexible ways. In this paper we study a state-of-the-art genomics application, SMUFIN, aiming to address the challenges of future HPC facilities.This work is partially supported by the European Research Council (ERC) under the EU Horizon 2020 programme (GA 639595), the Spanish Ministry of Economy, Industry and Competitivity (TIN2015-65316-P) and the Generalitat de Catalunya (2014-SGR-1051).Peer ReviewedPostprint (author's final draft

Diluting the Scalability Boundaries: Exploring the Use of Disaggregated Architectures for High-Level Network Data Analysis

Traditional data centers are designed with a rigid architecture of fit-for-purpose servers that provision resources beyond the average workload in order to deal with occasional peaks of data. Heterogeneous data centers are pushing towards more cost-efficient architectures with better resource provisioning. In this paper we study the feasibility of using disaggregated architectures for intensive data applications, in contrast to the monolithic approach of server-oriented architectures. Particularly, we have tested a proactive network analysis system in which the workload demands are highly variable. In the context of the dReDBox disaggregated architecture, the results show that the overhead caused by using remote memory resources is significant, between 66\% and 80\%, but we have also observed that the memory usage is one order of magnitude higher for the stress case with respect to average workloads. Therefore, dimensioning memory for the worst case in conventional systems will result in a notable waste of resources. Finally, we found that, for the selected use case, parallelism is limited by memory. Therefore, using a disaggregated architecture will allow for increased parallelism, which, at the same time, will mitigate the overhead caused by remote memory.Comment: 8 pages, 6 figures, 2 tables, 32 references. Pre-print. The paper will be presented during the IEEE International Conference on High Performance Computing and Communications in Bangkok, Thailand. 18 - 20 December, 2017. To be published in the conference proceeding

dReDBox: A Disaggregated Architectural Perspective for Data Centers

Data centers are currently constructed with fixed blocks (blades); the hard boundaries of this approach lead to suboptimal utilization of resources and increased energy requirements. The dReDBox (disaggregated Recursive Datacenter in a Box) project addresses the problem of fixed resource proportionality in next-generation, low-power data centers by proposing a paradigm shift toward finer resource allocation granularity, where the unit is the function block rather than the mainboard tray. This introduces various challenges at the system design level, requiring elastic hardware architectures, efficient software support and management, and programmable interconnect. Memory and hardware accelerators can be dynamically assigned to processing units to boost application performance, while high-speed, low-latency electrical and optical interconnect is a prerequisite for realizing the concept of data center disaggregation. This chapter presents the dReDBox hardware architecture and discusses design aspects of the software infrastructure for resource allocation and management. Furthermore, initial simulation and evaluation results for accessing remote, disaggregated memory are presented, employing benchmarks from the Splash-3 and the CloudSuite benchmark suites.This work was supported in part by EU H2020 ICT project dRedBox, contract #687632.Peer ReviewedPostprint (author's final draft

Leveraging disaggregated accelerators and non-volatile memories to improve the efficiency of modern datacenters

(English) Traditional data centers consist of computing nodes that possess all the resources physically attached. When there was the need to deal with more significant demands, the solution has been to either add more nodes (scaling out) or increase the capacity of existing ones (scaling-up). Workload requirements are traditionally fulfilled by selecting compute platforms from pools that better satisfy their average or maximum resource requirements depending on the price that the user is willing to pay. The amount of processor, memory, storage, and network bandwidth of a selected platform needs to meet or exceed the platform requirements of the workload. Beyond those explicitly required by the workload, additional resources are considered stranded resources (if not used) or bonus resources (if used). Meanwhile, workloads in all market segments have evolved significantly during the last decades. Today, workloads have a larger variety of requirements in terms of characteristics related to the computing platforms. Those workload new requirements include new technologies such as GPU, FPGA, NVMe, etc. These new technologies are more expensive and thus become more limited. It is no longer feasible to increase the number of resources according to potential peak demands, as this significantly raises the total cost of ownership. Software-Defined-Infrastructures (SDI), a new concept for the data center architecture, is being developed to address those issues. The main SDI proposition is to disaggregate all the resources over the fabric to enable the required flexibility. On SDI, instead of pools of computational nodes, the pools consist of individual units of resources (CPU, memory, FPGA, NVMe, GPU, etc.). When an application needs to be executed, SDI identifies the computational requirements and assembles all the resources required, creating a composite node. Resource disaggregation brings new challenges and opportunities that this thesis will explore. This thesis demonstrates that resource disaggregation brings opportunities to increase the efficiency of modern data centers. This thesis demonstrates that resource disaggregation may increase workloads' performance when sharing a single resource. Thus, needing fewer resources to achieve similar results. On the other hand, this thesis demonstrates how through disaggregation, aggregation of resources can be made, increasing a workload's performance. However, to take maximum advantage of those characteristics and flexibility, orchestrators must be aware of them. This thesis demonstrates how workload-aware techniques applied at the resource management level allow for improved quality of service leveraging resource disaggregation. Enabling resource disaggregation, this thesis demonstrates a reduction of up to 49% missed deadlines compared to a traditional schema. This reduction can rise up to 100% when enabling workload awareness. Moreover, this thesis demonstrates that GPU partitioning and disaggregation further enhances the data center flexibility. This increased flexibility can achieve the same results with half the resources. That is, with a single physical GPU partitioned and disaggregated, the same results can be achieved with 2 GPU disaggregated but not partitioned. Finally, this thesis demonstrates that resource fragmentation becomes key when having a limited set of heterogeneous resources, namely NVMe and GPU. For the case of an heterogeneous set of resources, and specifically when some of those resources are highly demanded but limited in quantity. That is, the situation where the demand for a resource is unexpectedly high, this thesis proposes a technique to minimize fragmentation that reduces deadlines missed compared to a disaggregation-aware policy of up to 86%.(Català) Els datacenters tradicionals consisteixen en un seguit de nodes computacionals que contenen al seu interior tots els recursos necessaris. Quan hi ha una necessitat de gestionar demandes superiors la solució era o afegir més nodes (scale-out) o incrementar la capacitat dels existents (scale-up). Els requisits de les aplicacions tradicionalment són satisfets seleccionant recursos de racks que satisfan millor el seu SLA basats o en la mitjana dels requisits o en el màxim possible, en funció del preu que l'usuari estigui disposat a pagar. La quantitat de processadors, memòria, disc, i banda d'ampla d'un rack necessita satisfer o excedir els requisits de l'aplicació. Els recursos addicionals als requerits per les aplicacions són considerats inactius (si no es fan servir) o addicionals (si es fan servir). Per altra banda, les aplicacions en tots els segments de mercat han evolucionat significativament en les últimes dècades. Avui en dia, les aplicacions tenen una gran varietat de requisits en termes de característiques que ha de tenir la infraestructura. Aquests nous requisits inclouen tecnologies com GPU, FPGA, NVMe, etc. Aquestes tecnologies són més cares i, per tant, més limitades. Ja no és factible incrementar el nombre de recursos segons el potencial pic de demanda, ja que això incrementa significativament el cost total de la infraestructura. Software-Defined Infrastructures és un nou concepte per a l'arquitectura de datacenters que s'està desenvolupant per pal·liar aquests problemes. La proposició principal de SDI és desagregar tots els recursos sobre la xarxa per garantir una major flexibilitat. Sota SDI, en comptes de racks de nodes computacionals, els racks consisteix en unitats individuals de recursos (CPU, memòria, FPGA, NVMe, GPU, etc). Quan una aplicació necessita executar, SDI identifica els requisits computacionals i munta una plataforma amb tots els recursos necessaris, creant un node composat. La desagregació de recursos porta nous reptes i oportunitats que s'exploren en aquesta tesi. Aquesta tesi demostra que la desagregació de recursos ens dona l'oportunitat d'incrementar l'eficiència dels datacenters moderns. Aquesta tesi demostra la desagregació pot incrementar el rendiment de les aplicacions. Però per treure el màxim partit a aquestes característiques i d'aquesta flexibilitat, els orquestradors n'han de ser conscient. Aquesta tesi demostra que aplicant tècniques conscients de l'aplicació aplicades a la gestió de recursos permeten millorar la qualitat del servei a través de la desagregació de recursos. Habilitar la desagregació de recursos porta a una reducció de fins al 49% els deadlines perduts comparat a una política tradicional. Aquesta reducció pot incrementar-se fins al 100% quan s'habilita la consciència de l'aplicació. A més a més, aquesta tesi demostra que el particionat de GPU combinat amb la desagregació millora encara més la flexibilitat. Aquesta millora permet aconseguir els mateixos resultats amb la meitat de recursos. És a dir, amb una sola GPU física particionada i desagregada, els mateixos resultats són obtinguts que utilitzant-ne dues desagregades però no particionades. Finalment, aquesta tesi demostra que la gestió de la fragmentació de recursos és una peça clau quan la quantitat de recursos és limitada en un conjunt heterogeni de recursos. Pel cas d'un conjunt heterogeni de recursos, i especialment quan aquests recursos tenen molta demanda però són limitats en quantitat. És a dir, quan la demanda pels recursos és inesperadament alta, aquesta tesi proposa una tècnica minimitzant la fragmentació que redueix els deadlines perduts comparats a una política de desagregació de fins al 86%.Arquitectura de computador

Enabling Micro-level Demand-Side Grid Flexiblity in Resource Constrained Environments

The increased penetration of uncertain and variable renewable energy presents various resource and operational electric grid challenges. Micro-level (household and small commercial) demand-side grid flexibility could be a cost-effective strategy to integrate high penetrations of wind and solar energy, but literature and field deployments exploring the necessary information and communication technologies (ICTs) are scant. This paper presents an exploratory framework for enabling information driven grid flexibility through the Internet of Things (IoT), and a proof-of-concept wireless sensor gateway (FlexBox) to collect the necessary parameters for adequately monitoring and actuating the micro-level demand-side. In the summer of 2015, thirty sensor gateways were deployed in the city of Managua (Nicaragua) to develop a baseline for a near future small-scale demand response pilot implementation. FlexBox field data has begun shedding light on relationships between ambient temperature and load energy consumption, load and building envelope energy efficiency challenges, latency communication network challenges, and opportunities to engage existing demand-side user behavioral patterns. Information driven grid flexibility strategies present great opportunity to develop new technologies, system architectures, and implementation approaches that can easily scale across regions, incomes, and levels of development

On interconnecting and orchestrating components in disaggregated data centers:The dReDBox project vision

Computing systems servers-low-or high-end ones have been traditionally designed and built using a main-board and its hardware components as a 'hard' monolithic building block; this formed the base unit on which the system hardware and software stack design build upon. This hard deployment and management border on compute, memory, network and storage resources is either fixed or quite limited in expandability during design time and in practice remains so throughout machine lifetime as subsystem upgrades are seldomely employed. The impact of this rigidity has well known ramifications in terms of lower system resource utilization, costly upgrade cycles and degraded energy proportionality. In the dReDBox project we take on the challenge of breaking the server boundaries through materialization of the concept of disaggregation. The basic idea of the dReDBox architecture is to use a core of high-speed, low-latency opto-electronic fabric that will bring physically distant components more closely in terms of latency and bandwidth. We envision a powerful software-defined control plane that will match the flexibility of the system to the resource needs of the applications (or VMs) running in the system. Together the hardware, interconnect, and software architectures will enable the creation of a modular, vertically-integrated system that will form a datacenter-in-a-box