Dynamic Virtual Page-based Flash Translation Layer with Novel Hot Data Identification and Adaptive Parallelism Management

Solid-state disks (SSDs) tend to replace traditional motor-driven hard disks in high-end storage devices in past few decades. However, various inherent features, such as out-of-place update [resorting to garbage collection (GC)] and limited endurance (resorting to wear leveling), need to be reduced to a large extent before that day comes. Both the GC and wear leveling fundamentally depend on hot data identification (HDI). In this paper, we propose a hot data-aware flash translation layer architecture based on a dynamic virtual page (DVPFTL) so as to improve the performance and lifetime of NAND flash devices. First, we develop a generalized dual layer HDI (DL-HDI) framework, which is composed of a cold data pre-classifier and a hot data post-identifier. Those can efficiently follow the frequency and recency of information access. Then, we design an adaptive parallelism manager (APM) to assign the clustered data chunks to distinct resident blocks in the SSD so as to prolong its endurance. Finally, the experimental results from our realized SSD prototype indicate that the DVPFTL scheme has reliably improved the parallelizability and endurance of NAND flash devices with improved GC-costs, compared with related works.Peer reviewe

A Cache Management Strategy to Replace Wear Leveling Techniques for Embedded Flash Memory

Prices of NAND flash memories are falling drastically due to market growth and fabrication process mastering while research efforts from a technological point of view in terms of endurance and density are very active. NAND flash memories are becoming the most important storage media in mobile computing and tend to be less confined to this area. The major constraint of such a technology is the limited number of possible erase operations per block which tend to quickly provoke memory wear out. To cope with this issue, state-of-the-art solutions implement wear leveling policies to level the wear out of the memory and so increase its lifetime. These policies are integrated into the Flash Translation Layer (FTL) and greatly contribute in decreasing the write performance. In this paper, we propose to reduce the flash memory wear out problem and improve its performance by absorbing the erase operations throughout a dual cache system replacing FTL wear leveling and garbage collection services. We justify this idea by proposing a first performance evaluation of an exclusively cache based system for embedded flash memories. Unlike wear leveling schemes, the proposed cache solution reduces the total number of erase operations reported on the media by absorbing them in the cache for workloads expressing a minimal global sequential rate.Comment: Ce papier a obtenu le "Best Paper Award" dans le "Computer System track" nombre de page: 8; International Symposium on Performance Evaluation of Computer & Telecommunication Systems, La Haye : Netherlands (2011

A survey of energy saving techniques for mobile computers

Portable products such as pagers, cordless and digital cellular telephones, personal audio equipment, and laptop computers are increasingly being used. Because these applications are battery powered, reducing power consumption is vital. In this report we first give a survey of techniques for accomplishing energy reduction on the hardware level such as: low voltage components, use of sleep or idle modes, dynamic control of the processor clock frequency, clocking regions, and disabling unused peripherals. System- design techniques include minimizing external accesses, minimizing logic state transitions, and system partitioning using application-specific coprocessors. Then we review energy reduction techniques in the design of operating systems, including communication protocols, caching, scheduling and QoS management. Finally, we give an overview of policies to optimize the code of the application for energy consumption and make it aware of power management functions. Applications play a critical role in the user's experience of a power-managed system. Therefore, the application and the operating system must allow a user to control the power management. Remarkably, it appears that some energy preserving techniques not only lead to a reduced energy consumption, but also to more performance

Low Power system Design techniques for mobile computers

Portable products are being used increasingly. Because these systems are battery powered, reducing power consumption is vital. In this report we give the properties of low power design and techniques to exploit them on the architecture of the system. We focus on: min imizing capacitance, avoiding unnecessary and wasteful activity, and reducing voltage and frequency. We review energy reduction techniques in the architecture and design of a hand-held computer and the wireless communication system, including error control, sys tem decomposition, communication and MAC protocols, and low power short range net works

How migrating 0.0001% of address space saves 12% of energy in hybrid storage

We present a simple, operating-\ud system independent method to reduce the num-\ud ber of seek operations and consequently reduce\ud the energy consumption of a hybrid storage\ud device consisting of a hard disk and a flash\ud memory. Trace-driven simulations show that\ud migrating a tiny amount of the address space\ud (0.0001%) from disk to flash already results\ud in a significant storage energy reduction (12%)\ud at virtually no extra cost. We show that the\ud amount of energy saving depends on which part\ud of the address space is migrated, and we present\ud two indicators for this, namely sequentiality and\ud request frequency. Our simulations show that\ud both are suitable as criterion for energy-saving\ud file placement methods in hybrid storage. We\ud address potential wear problems in the flash\ud subsystem by presenting a simple way to pro-\ud long its expected lifetime.\u

Investigating SRAM PUFs in large CPUs and GPUs

Physically unclonable functions (PUFs) provide data that can be used for cryptographic purposes: on the one hand randomness for the initialization of random-number generators; on the other hand individual fingerprints for unique identification of specific hardware components. However, today's off-the-shelf personal computers advertise randomness and individual fingerprints only in the form of additional or dedicated hardware. This paper introduces a new set of tools to investigate whether intrinsic PUFs can be found in PC components that are not advertised as containing PUFs. In particular, this paper investigates AMD64 CPU registers as potential PUF sources in the operating-system kernel, the bootloader, and the system BIOS; investigates the CPU cache in the early boot stages; and investigates shared memory on Nvidia GPUs. This investigation found non-random non-fingerprinting behavior in several components but revealed usable PUFs in Nvidia GPUs.Comment: 25 pages, 6 figures. Code in appendi

Energy-Efficient Streaming Using Non-volatile Memory

The disk and the DRAM in a typical mobile system consume a significant fraction (up to 30%) of the total system energy. To save on storage energy, the DRAM should be small and the disk should be spun down for long periods of time. We show that this can be achieved for predominantly streaming workloads by connecting the disk to the DRAM via a large non-volatile memory (NVM). We refer to this as the NVM-based architecture (NVMBA); the conventional architecture with only a DRAM and a disk is referred to as DRAMBA. The NVM in the NVMBA acts as a traffic reshaper from the disk to the DRAM. The total system costs are balanced, since the cost increase due to adding the NVM is compensated by the decrease in DRAM cost. We analyze the energy saving of NVMBA, with NAND flash memory serving as NVM, relative to DRAMBA with respect to (1) the streaming demand, (2) the disk form factor, (3) the best-effort provision, and (4) the stream location on the disk. We present a worst-case analysis of the reliability of the disk drive and the flash memory, and show that a small flash capacity is sufficient to operate the system over a year at negligible cost. Disk lifetime is superior to flash, so that is of no concern