Noise shaping Asynchronous SAR ADC based time to digital converter

Time-to-digital converters (TDCs) are key elements for the digitization of timing information in modern mixed-signal circuits such as digital PLLs, DLLs, ADCs, and on-chip jitter-monitoring circuits. Especially, high-resolution TDCs are increasingly employed in on-chip timing tests, such as jitter and clock skew measurements, as advanced fabrication technologies allow fine on-chip time resolutions. Its main purpose is to quantize the time interval of a pulse signal or the time interval between the rising edges of two clock signals. Similarly to ADCs, the performance of TDCs are also primarily characterized by Resolution, Sampling Rate, FOM, SNDR, Dynamic Range and DNL/INL. This work proposes and demonstrates 2nd order noise shaping Asynchronous SAR ADC based TDC architecture with highest resolution of 0.25 ps among current state of art designs with respect to post-layout simulation results. This circuit is a combination of low power/High Resolution 2nd Order Noise Shaped Asynchronous SAR ADC backend with simple Time to Amplitude converter (TAC) front-end and is implemented in 40nm CMOS technology. Additionally, special emphasis is given on the discussion on various current state of art TDC architectures.Electrical and Computer Engineerin

Design of a 12-GHz multicarrier earth-terminal for satellite-CATV interconnection

The design and development of the front-end for a multi-carrier system that allows multiplex signal transmission from satellite-borne transponders is described. Detailed systems analyses provided down-converter specifications. The 12 GHz carrier down-converter uses waveguide, coaxial, and microstrip transmission line elements in its implementation. Mixing is accomplished in a single-ended coaxial mixer employing a field-replacable cartridge style diode

Analysis of VCO based noise shaping ADCs linearized by PWM modulation

Nonlinearity is one of the main problems associated with VCO based noise shaping ADCs. Their open loop architecture does not permit correction of the nonlinear voltage to frequency response of the VCO by feedback. Recently, linearization of a VCO ADC by Pulse Width Modulation (PWM) precoding has been proposed. Here, the input signal is encoded by a PWM modulator to drive the VCO with a 2-level signal, thus eliminating the nonlinearity of the VCO. This paper analyzes the remaining inherent distortion in such modulators which originates from subsampling the PWM sidebands

True high-order VCO-based ADC

A novel approach to use a voltage-controlled oscillator (VCO) as the first integrator of a high-order continuous-time delta-sigma modulator (CT-DSM) is presented. In the proposed architecture, the VCO is combined with a digital up-down counter to implement the first integrator of the CT-DSM. Thus, the first integrator is digital-friendly and hence can maximally benefit from technological scaling

Study of voltage controlled oscillator based analog-to-digital converter

A voltage controlled oscillator (VCO) based analog-to-digital converter (ADC) is a time based architecture with a first-order noise-shaping property, which can be implemented using a VCO and digital circuits. This thesis analyzes the performance of VCO-based ADCs in the presence of non idealities such as jitter, nonlinearity, mismatch, and the metastability of D flip-flops. Based on this analysis, design criteria for determining parameters for VCO-based ADCs are described. Further, the study involves the use of VCO based Dual-slope A/D converter and its behaviour under different input voltage level. Graph is plotted between output voltages of the integrator vs. time. Digital circuits like a bit-counter and logic circuits are used for operation mode. A normal VCO model is also done in MATLAB-simulink environment and studied under variable input frequency and corresponding output plots are view

Phased Array Systems in Silicon

Phased array systems, a special case of MIMO systems, take advantage of spatial directivity and array gain to increase spectral efficiency. Implementing a phased array system at high frequency in a commercial silicon process technology presents several challenges. This article focuses on the architectural and circuit-level trade-offs involved in the design of the first silicon-based fully integrated phased array system operating at 24 GHz. The details of some of the important circuit building blocks are also discussed. The measured results demonstrate the feasibility of using integrated phased arrays for wireless communication and vehicular radar applications at 24 GHz

Advanced digital modulation: Communication techniques and monolithic GaAs technology

Communications theory and practice are merged with state-of-the-art technology in IC fabrication, especially monolithic GaAs technology, to examine the general feasibility of a number of advanced technology digital transmission systems. Satellite-channel models with (1) superior throughput, perhaps 2 Gbps; (2) attractive weight and cost; and (3) high RF power and spectrum efficiency are discussed. Transmission techniques possessing reasonably simple architectures capable of monolithic fabrication at high speeds were surveyed. This included a review of amplitude/phase shift keying (APSK) techniques and the continuous-phase-modulation (CPM) methods, of which MSK represents the simplest case