H ∞ sliding mode observer design for a class of nonlinear discrete time-delay systems: A delay-fractioning approach

Copyright @ 2012 John Wiley & SonsIn this paper, the H ∞  sliding mode observer (SMO) design problem is investigated for a class of nonlinear discrete time-delay systems. The nonlinear descriptions quantify the maximum possible derivations from a linear model, and the system states are allowed to be immeasurable. Attention is focused on the design of a discrete-time SMO such that the asymptotic stability as well as the H ∞  performance requirement of the error dynamics can be guaranteed in the presence of nonlinearities, time delay and external disturbances. Firstly, a discrete-time discontinuous switched term is proposed to make sure that the reaching condition holds. Then, by constructing a new Lyapunov–Krasovskii functional based on the idea of ‘delay fractioning’ and by introducing some appropriate free-weighting matrices, a sufficient condition is established to guarantee the desired performance of the error dynamics in the specified sliding mode surface by solving a minimization problem. Finally, an illustrative example is given to show the effectiveness of the designed SMO design scheme

Stability of gain scheduling control for aircraft with highly nonlinear behavior

"The main goal of this work is to study the stability properties of an aircraft with nonlinear behavior, controlled using a gain scheduled approach. An output feedback is proposed which is able to guarantee asymptotical stability of the task-coordinates origin and safety of the operation in the entire flight envelope. The results are derived using theory of hybrid and singular perturbed systems. It is demonstrated that both body velocity and orientation asymptotic tracking can be obtained in spite of nonlinearities and uncertainty. The results are illustrated using numerical simulations in F16 jet.

Event-triggered tracking control for switched nonlinear systems

In this paper, we study the output tracking control problem based on the event-triggered mechanism for cascade switched nonlinear systems. Firstly, an integral controller based on event-triggered conditions is designed, and the output tracking error of the closed-loop system can converge to a bounded region under the switching signal satisfying the average dwell time. Secondly, it is proved that the proposed minimum inter-event interval always has a positive lower bound and the Zeno behavior is successfully avoided during the sampling process. Finally, the numerical simulation is given to verify the feasibility of the proposed method

Dynamics and control of a class of underactuated mechanical systems

This paper presents a theoretical framework for the dynamics and control of underactuated mechanical systems, defined as systems with fewer inputs than degrees of freedom. Control system formulation of underactuated mechanical systems is addressed and a class of underactuated systems characterized by nonintegrable dynamics relations is identified. Controllability and stabilizability results are derived for this class of underactuated systems. Examples are included to illustrate the results; these examples are of underactuated mechanical systems that are not linearly controllable or smoothly stabilizable

Nonlinear Systems

Open Mathematics is a challenging notion for theoretical modeling, technical analysis, and numerical simulation in physics and mathematics, as well as in many other fields, as highly correlated nonlinear phenomena, evolving over a large range of time scales and length scales, control the underlying systems and processes in their spatiotemporal evolution. Indeed, available data, be they physical, biological, or financial, and technologically complex systems and stochastic systems, such as mechanical or electronic devices, can be managed from the same conceptual approach, both analytically and through computer simulation, using effective nonlinear dynamics methods. The aim of this Special Issue is to highlight papers that show the dynamics, control, optimization and applications of nonlinear systems. This has recently become an increasingly popular subject, with impressive growth concerning applications in engineering, economics, biology, and medicine, and can be considered a veritable contribution to the literature. Original papers relating to the objective presented above are especially welcome subjects. Potential topics include, but are not limited to: Stability analysis of discrete and continuous dynamical systems; Nonlinear dynamics in biological complex systems; Stability and stabilization of stochastic systems; Mathematical models in statistics and probability; Synchronization of oscillators and chaotic systems; Optimization methods of complex systems; Reliability modeling and system optimization; Computation and control over networked systems

Performance analysis of switching systems

Performance analysis is an important aspect in the design of dynamic (control) systems. Without a proper analysis of the behavior of a system, it is impossible to guarantee that a certain design satisfies the system’s requirements. For linear time-invariant systems, accurate performance analyses are relatively easy to make and as a result also many linear (controller) design methods have appeared in the past. For nonlinear systems, on the other hand, such accurate performance analyses and controller design methods are in general not available. A main reason hereof is that nonlinear systems, as opposed to linear time-invariant systems, can have multiple steady-state solutions. Due to the coexistence of multiple steady-state solutions, it is much harder to define an accurate performance index. Some nonlinear systems, i.e. the so-called convergent nonlinear systems, however, are characterized by a unique steady-state solution. This steady-state solution may depend on the system’s input signals (e.g. reference signals), but is independent of the initial conditions of the system. In the past, the notion of convergent systems has already been proven to be very useful in the performance analysis of nonlinear systems with inputs. In this thesis, new results in the field of performance analysis of nonlinear systems with inputs are presented, based on the notion of convergent systems. One part of the thesis is concerned with the question "how to analyse the performance for a convergent system?" Since the behavior of a convergent system is independent of the initial conditions (after some transient time), simulation can be used to find the unique steady-state solution that corresponds to a certain input signal, but this can be very time-consuming. In this thesis, a computationally more efficient approach is presented to estimate the steady-state performance of harmonically forced Lur’e systems, in terms of nonlinear frequency response functions (nFRFs). This approach is based on the method of harmonic linearization. It provides both a linear approximation of the nFRF and an upper bound on the error between this linear approximation and the true nFRF. It is shown in several examples that the approximation of the nFRF is accurate, and that it provides more detailed information on the considered system than the often used ‘L2 gain’ performance index. An additional observation that is made, is that the method of harmonic linearization can sometimes be ‘misleading’ for Lur’e systems with a saturation-like nonlinearity: for the case that the harmonic balance equation has a unique solution, it is shown that the corresponding nonlinear system can have multiple distinct steady-state solutions. Another part of the thesis is concerned with the question "under what conditions is a system with inputs guaranteed to be convergent?" In particular two types of systems were investigated: switched linear systems and Lur’e systems with a saturation nonlinearity and marginally stable linear part. For the switched linear systems, it is assumed that the dynamics of all the separate linear modes are given. For this setting, it was investigated if it is possible to find a switching rule (which defines when to switch between the available modes) such that the closed-loop system is convergent. Both a state-based, an observer-based, and a time-based switching rule are presented that guarantee a convergent system, assuming some conditions on the linear dynamics are met. The second type of systems that are discussed, are Lur’e systems with a saturation nonlinearity and marginally stable linear part. For this type of systems, the goal was to find sufficient conditions under which the closed-loop system is convergent. Because of the marginally stable linear part, however, a quadratically convergent system cannot be obtained. Instead, sufficient conditions are discussed that guarantee uniform convergency of the system. The obtained theory is shown to be also applicable to a class of anti-windup systems with a marginally stable plant. For this class of systems, the results of the convergency-based performance analysis are compared with the analysis results of existing anti-windup methods. It is shown that the convergency-based performance analysis can in some cases provide more detailed information on the steady-state behavior of the system. The results of uniform convergency for anti-windup systems are shown to be also applicable in the field of production and inventory control of discrete-event manufacturing systems. Since a manufacturing machine has a certain production capacity and cannot produce at a negative rate, it can be seen as an integrator plant (input: production rate, output: amount of finished products) preceded by a saturation function. For this marginally stable plant, a controller was constructed in such a way that the closed-loop system is uniformly convergent. The controller was also implemented in the discrete-event domain and the results from discrete-event simulations were compared with those of continuous-time simulations. Similarly, the controller was also applied for the production and inventory control of a line of four manufacturing machines. For both the single machine and the line of four machines, the resulting controlled discrete-event systems are shown to have the desired tracking properties. Besides these theoretical and numerical results, also experimental results are presented in this thesis. By means of an electromechanical construction, several experimental results were obtained, and used to validate the theoretical results for both the switched linear systems and the anti-windup systems