CONTROLLER DESIGN BASED ON A KINEMATIC ESTIMATOR FOR A 3RRR PLANAR PARALLEL ROBOT DRIVEN BY ELECTRIC MOTORS

The control of parallel robotic manipulator requires feedbacks of all the redundant coordinates and their derivatives. In practice, to have all feedback variables for the controller, a robot needs more sensors than its degree of freedom. These sensors measure not only the actuated joint variables, but also the auxiliary variables, position and velocity of the moving platform. In this paper, a novel method is introduced to estimate dependently generalized coordinates and motion of the moving platform. A kinematic error feedback technique is exploited to ensure the estimated motion converge to the actual motion of the robot

Advanced Strategies for Robot Manipulators

Amongst the robotic systems, robot manipulators have proven themselves to be of increasing importance and are widely adopted to substitute for human in repetitive and/or hazardous tasks. Modern manipulators are designed complicatedly and need to do more precise, crucial and critical tasks. So, the simple traditional control methods cannot be efficient, and advanced control strategies with considering special constraints are needed to establish. In spite of the fact that groundbreaking researches have been carried out in this realm until now, there are still many novel aspects which have to be explored

Development of Robust Control Strategies for Autonomous Underwater Vehicles

The resources of the energy and chemical balance in the ocean sustain mankind in many ways. Therefore, ocean exploration is an essential task that is accomplished by deploying Underwater Vehicles. An Underwater Vehicle with autonomy feature for its navigation and control is called Autonomous Underwater Vehicle (AUV). Among the task handled by an AUV, accurately positioning itself at a desired position with respect to the reference objects is called set-point control. Similarly, tracking of the reference trajectory is also another important task. Battery recharging of AUV, positioning with respect to underwater structure, cable, seabed, tracking of reference trajectory with desired accuracy and speed to avoid collision with the guiding vehicle in the last phase of docking are some significant applications where an AUV needs to perform the above tasks. Parametric uncertainties in AUV dynamics and actuator torque limitation necessitate to design robust control algorithms to achieve motion control objectives in the face of uncertainties. Sliding Mode Controller (SMC), H / μ synthesis, model based PID group controllers are some of the robust controllers which have been applied to AUV. But SMC suffers from less efficient tuning of its switching gains due to model parameters and noisy estimated acceleration states appearing in its control law. In addition, demand of high control effort due to high frequency chattering is another drawback of SMC. Furthermore, real-time implementation of H / μ synthesis controller based on its stability study is restricted due to use of linearly approximated dynamic model of an AUV, which hinders achieving robustness. Moreover, model based PID group controllers suffer from implementation complexities and exhibit poor transient and steady-state performances under parametric uncertainties. On the other hand model free Linear PID (LPID) has inherent problem of narrow convergence region, i.e.it can not ensure convergence of large initial error to zero. Additionally, it suffers from integrator-wind-up and subsequent saturation of actuator during the occurrence of large initial error. But LPID controller has inherent capability to cope up with the uncertainties. In view of addressing the above said problem, this work proposes wind-up free Nonlinear PID with Bounded Integral (BI) and Bounded Derivative (BD) for set-point control and combination of continuous SMC with Nonlinear PID with BI and BD namely SM-N-PID with BI and BD for trajectory tracking. Nonlinear functions are used for all P,I and D controllers (for both of set-point and tracking control) in addition to use of nonlinear tan hyperbolic function in SMC(for tracking only) such that torque demand from the controller can be kept within a limit. A direct Lyapunov analysis is pursued to prove stable motion of AUV. The efficacies of the proposed controllers are compared with other two controllers namely PD and N-PID without BI and BD for set-point control and PD plus Feedforward Compensation (FC) and SM-NPID without BI and BD for tracking control. Multiple AUVs cooperatively performing a mission offers several advantages over a single AUV in a non-cooperative manner; such as reliability and increased work efficiency, etc. Bandwidth limitation in acoustic medium possess challenges in designing cooperative motion control algorithm for multiple AUVs owing to the necessity of communication of sensors and actuator signals among AUVs. In literature, undirected graph based approach is used for control design under communication constraints and thus it is not suitable for large number of AUVs participating in a cooperative motion plan. Formation control is a popular cooperative motion control paradigm. This thesis models the formation as a minimally persistent directed graph and proposes control schemes for maintaining the distance constraints during the course of motion of entire formation. For formation control each AUV uses Sliding Mode Nonlinear PID controller with Bounded Integrator and Bounded Derivative. Direct Lyapunov stability analysis in the framework of input-to-state stability ensures the stable motion of formation while maintaining the desired distance constraints among the AUVs

Advances in PID Control

Since the foundation and up to the current state-of-the-art in control engineering, the problems of PID control steadily attract great attention of numerous researchers and remain inexhaustible source of new ideas for process of control system design and industrial applications. PID control effectiveness is usually caused by the nature of dynamical processes, conditioned that the majority of the industrial dynamical processes are well described by simple dynamic model of the first or second order. The efficacy of PID controllers vastly falls in case of complicated dynamics, nonlinearities, and varying parameters of the plant. This gives a pulse to further researches in the field of PID control. Consequently, the problems of advanced PID control system design methodologies, rules of adaptive PID control, self-tuning procedures, and particularly robustness and transient performance for nonlinear systems, still remain as the areas of the lively interests for many scientists and researchers at the present time. The recent research results presented in this book provide new ideas for improved performance of PID control applications

Robotic Manipulator Control in the Presence of Uncertainty

openThis research focuses on the problem of manipulator control in the presence of uncertainty and aims to compare different approaches for handling uncertainty while developing robust and adaptive methods that can control the robot without explicit knowledge of uncertainty bounds. Uncertainty is a pervasive challenge in robotics, arising from various sources such as sensor noise, modeling errors, and external disturbances. Effectively addressing uncertainty is crucial for achieving accurate and reliable manipulator control. The research will explore and compare existing methods for uncertainty handling such as robust feedback linearization , sliding mode control and robust adaptive control. These methods provide mechanisms to model and compensate for uncertainty in the control system. Additionally, modified robust and adaptive control methods will be developed that can dynamically adjust control laws based on the observed states, without requiring explicit knowledge of uncertainty bounds. To evaluate the performance of the different approaches, comprehensive experiments will be conducted on a manipulator platform. Various manipulation tasks will be performed under different levels of uncertainty, and the performance of each control approach will be assessed in terms of accuracy, stability, and adaptability. Comparative analysis will be conducted to highlight the strengths and weaknesses of each method and identify the most effective approach for handling uncertainty in manipulator control. The outcomes of this research will contribute to the advancement of manipulator control by providing insights into the effectiveness of different approaches for uncertainty handling. The development of new robust and adaptive control methods will enable manipulators to operate in uncertain environments without requiring explicit knowledge of uncertainty bounds. Ultimately, this research will facilitate the deployment of more reliable and adaptive robotic systems capable of handling uncertainty and improving their performance in various real-world applications.This research focuses on the problem of manipulator control in the presence of uncertainty and aims to compare different approaches for handling uncertainty while developing robust and adaptive methods that can control the robot without explicit knowledge of uncertainty bounds. Uncertainty is a pervasive challenge in robotics, arising from various sources such as sensor noise, modeling errors, and external disturbances. Effectively addressing uncertainty is crucial for achieving accurate and reliable manipulator control. The research will explore and compare existing methods for uncertainty handling such as robust feedback linearization , sliding mode control and robust adaptive control. These methods provide mechanisms to model and compensate for uncertainty in the control system. Additionally, modified robust and adaptive control methods will be developed that can dynamically adjust control laws based on the observed states, without requiring explicit knowledge of uncertainty bounds. To evaluate the performance of the different approaches, comprehensive experiments will be conducted on a manipulator platform. Various manipulation tasks will be performed under different levels of uncertainty, and the performance of each control approach will be assessed in terms of accuracy, stability, and adaptability. Comparative analysis will be conducted to highlight the strengths and weaknesses of each method and identify the most effective approach for handling uncertainty in manipulator control. The outcomes of this research will contribute to the advancement of manipulator control by providing insights into the effectiveness of different approaches for uncertainty handling. The development of new robust and adaptive control methods will enable manipulators to operate in uncertain environments without requiring explicit knowledge of uncertainty bounds. Ultimately, this research will facilitate the deployment of more reliable and adaptive robotic systems capable of handling uncertainty and improving their performance in various real-world applications

Modelling and control of lightweight underwater vehicle-manipulator systems

This thesis studies the mathematical description and the low-level control structures for underwater robotic systems performing motion and interaction tasks. The main focus is on the study of lightweight underwater-vehicle manipulator systems. A description of the dynamic and hydrodynamic modelling of the underwater vehicle-manipulator system (UVMS) is presented and a study of the coupling effects between the vehicle and manipulator is given. Through simulation results it is shown that the vehicle’s capabilities are degraded by the motion of the manipulator, when it has a considerable mass with respect to the vehicle. Understanding the interaction effects between the two subsystems is beneficial in developing new control architectures that can improve the performance of the system. A control strategy is proposed for reducing the coupling effects between the two subsystems when motion tasks are required. The method is developed based on the mathematical model of the UVMS and the estimated interaction effects. Simulation results show the validity of the proposed control structure even in the presence of uncertainties in the dynamic model. The problem of autonomous interaction with the underwater environment is further addressed. The thesis proposes a parallel position/force control structure for lightweight underwater vehicle-manipulator systems. Two different strategies for integrating this control law on the vehicle-manipulator structure are proposed. The first strategy uses the parallel control law for the manipulator while a different control law, the Proportional Integral Limited control structure, is used for the vehicle. The second strategy treats the underwater vehicle-manipulator system as a single system and the parallel position/force law is used for the overall system. The low level parallel position/force control law is validated through practical experiments using the HDT-MK3-M electric manipulator. The Proportional Integral Limited control structure is tested using a 5 degrees-of-freedom underwater vehicle in a wave-tank facility. Furthermore, an adaptive tuning method based on interaction theory is proposed for adjusting the gains of the controller. The experimental results show that the method is advantageous as it decreases the complexity of the manual tuning otherwise required and reduces the energy consumption. The main objectives of this thesis are to understand and accurately represent the behaviour of an underwater vehiclemanipulator system, to evaluate this system when in contact with the environment and to design informed low-level control structures based on the observations made through the mathematical study of the system. The concepts presented in this thesis are not restricted to only vehicle-manipulator systems but can be applied to different other multibody robotic systems

Robot Manipulators

Robot manipulators are developing more in the direction of industrial robots than of human workers. Recently, the applications of robot manipulators are spreading their focus, for example Da Vinci as a medical robot, ASIMO as a humanoid robot and so on. There are many research topics within the field of robot manipulators, e.g. motion planning, cooperation with a human, and fusion with external sensors like vision, haptic and force, etc. Moreover, these include both technical problems in the industry and theoretical problems in the academic fields. This book is a collection of papers presenting the latest research issues from around the world

Recent advances on recursive filtering and sliding mode design for networked nonlinear stochastic systems: A survey

Copyright © 2013 Jun Hu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.Some recent advances on the recursive filtering and sliding mode design problems for nonlinear stochastic systems with network-induced phenomena are surveyed. The network-induced phenomena under consideration mainly include missing measurements, fading measurements, signal quantization, probabilistic sensor delays, sensor saturations, randomly occurring nonlinearities, and randomly occurring uncertainties. With respect to these network-induced phenomena, the developments on filtering and sliding mode design problems are systematically reviewed. In particular, concerning the network-induced phenomena, some recent results on the recursive filtering for time-varying nonlinear stochastic systems and sliding mode design for time-invariant nonlinear stochastic systems are given, respectively. Finally, conclusions are proposed and some potential future research works are pointed out.This work was supported in part by the National Natural Science Foundation of China under Grant nos. 61134009, 61329301, 61333012, 61374127 and 11301118, the Engineering and Physical Sciences Research Council (EPSRC) of the UK under Grant no. GR/S27658/01, the Royal Society of the UK, and the Alexander von Humboldt Foundation of Germany