Fingertip Fiber Optical Tactile Array with Two-Level Spring Structure

Tactile perception is a feature benefiting reliable grasping and manipulation. This paper presents the design of an integrated fingertip force sensor employing an optical fiber based approach where applied forces modulate light intensity. The proposed sensor system is developed to support grasping of a broad range of objects, including those that are hard as well those that are soft. The sensor system is comprised of four sensing elements forming a tactile array integrated with the tip of a finger. We investigate the design configuration of a separate force sensing element with the aim to improve its measurement range. The force measurement of a single tactile element is based on a two-level displacement that is achieved thanks to a hybrid sensing structure made up of a stiff linear and flexible ortho-planar spring. An important outcome of this paper is a miniature tactile fingertip sensor that is capable of perceiving light contact, typically occurring during the initial stages of a grasp, as well as measuring higher forces, commonly present during tight grasps

Elastomer-based touch sensor: Visualization of tactile pressure distribution

© Springer Nature Switzerland AG 2019. This paper presents an elastomer-based tactile sensor that can sense the tactile information in the form of pressure distribution. Our proposed sensor uses a piece of coated elastomer with thin conical pins underneath as the touch medium. The elastomer consists of 91 pins arranged in a honeycomb pattern, each pin can be regarded as a tactile sensing element. They are spaced at 1.5 mm in x and y direction. Each tactile element transfers the applied pressure value into a circular image pattern which can be captured by a camera placed at the end of the sensor structure. The applied pressure over the sensing array can be computed by processing the area of each sensing element. MATLAB is used to process the received images relating the applied pressure to the activated pixels in each circular pattern of the tactile element, and further visualizing the pressure distribution on a reconstructed surface of the sensor. This paper presents the development principle and fabrication process of the proposed sensor. The experimental results have proven the viability of the sensing concept; the prototype sensor can effectively detect single-point touch caused by objects with different dimensions and multi-point touch interactions with a spacing of more than 2.5 mm

A survey of dextrous manipulation

technical reportThe development of mechanical end effectors capable of dextrous manipulation is a rapidly growing and quite successful field of research. It has in some sense put the focus on control issues, in particular, how to control these remarkably humanlike manipulators to perform the deft movement that we take for granted in the human hand. The kinematic and control issues surrounding manipulation research are clouded by more basic concerns such as: what is the goal of a manipulation system, is the anthropomorphic or functional design methodology appropriate, and to what degree does the control of the manipulator depend on other sensory systems. This paper examines the potential of creating a general purpose, anthropomorphically motivated, dextrous manipulation system. The discussion will focus on features of the human hand that permit its general usefulness as a manipulator. A survey of machinery designed to emulate these capabilities is presented. Finally, the tasks of grasping and manipulation are examined from the control standpoint to suggest a control paradigm which is descriptive, yet flexible and computationally efficient1

An Optical Sensor Design: Concurrent Multi-axis Force Measurement and Tactile Perception.

PhD ThesesForce and tactile sensing have experienced a surge of interest over recent decades, as they convey useful information about the direct physical interaction between the sensor and the external environment. A robot end effector is a device designed to interact with the environment. End effectors such as robotic hands and grippers can be used to pick up, place or generally manipulate objects. There is a clear need to equip such end effectors with appropriate sensing means to be able to measure tactile and force information. Work to date has explored these two modalities separately. Tactile sensors have been developed for integration with gripper fingertips or as skins embedded with the outer side of manipulators, mainly to measure normal force and its distribution across a surface patch. On the other hand, force sensors have commonly been integrated with the joints of robotic arms or fingers to measure external multi-axis forces and torques via the connected links. We observe that a force sensor cannot measure tactile information, and current tactile sensors cannot accurately measure force information. This can become a particular issue when integrating force sensors remotely to measure forces indirectly, especially if the connecting link is flexible or, generally, difficult to model potentially impacting negatively on the force estimates. We aim to provide a solution for an integrated sensor capable of measuring tactile and force information at the point of contact, i.e., on the fingertip of a robot hand or arm. In this thesis, we explore the idea of integrating the two sensing modalities, tactile and force sensing, in one sensor housing with the signal acquisition being performed by a single monocular camera acting as the transducer. The hypothesis is that an integrated force/tactile sensor will perform in a better way than having these sensor modalities separated. This thesis shows that an integrated sensor achieves a tactile sensing performance comparable to existing vision-based tactile sensors and at the same time proves to provide more accurate force sensor information whilst extending the field of similar vision-based sensors from 3 DoF to 6 DoF. In addition, the tactile sensing element of our sensor is not affected by the patterns superimposed on to the flexible element of comparable vision-based sensors used to infer force information. In this thesis, we have implemented several sensor prototypes; designs and experimental analyses for each prototype are being provided. The manufactured sensor prototypes prove the validity of the proposed vision-based dual-modality sensing approach, and the proposed sensing principle and structure shows high versatility and accuracy, as well as the potential for further miniaturization, making the proposed concept suitable for integration with standard robot end effectors

Sensors for Robotic Hands: A Survey of State of the Art

Recent decades have seen significant progress in the field of artificial hands. Most of the surveys, which try to capture the latest developments in this field, focused on actuation and control systems of these devices. In this paper, our goal is to provide a comprehensive survey of the sensors for artificial hands. In order to present the evolution of the field, we cover five year periods starting at the turn of the millennium. At each period, we present the robot hands with a focus on their sensor systems dividing them into categories, such as prosthetics, research devices, and industrial end-effectors.We also cover the sensors developed for robot hand usage in each era. Finally, the period between 2010 and 2015 introduces the reader to the state of the art and also hints to the future directions in the sensor development for artificial hands

Anthropomorphic robot finger with multi-point tactile sensation

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2001.Includes bibliographical references (p. 84-95).The goal of this research is to develop the prototype of a tactile sensing platform for anthropomorphic manipulation research. We investigate this problem through the fabrication and simple control of a planar 2-DOF robotic finger inspired by anatomic consistency, self-containment, and adaptability. The robot is equipped with a tactile sensor array based on optical transducer technology whereby localized changes in light intensity within an illuminated foam substrate correspond to the distribution and magnitude of forces applied to the sensor surface plane [58]. The integration of tactile perception is a key component in realizing robotic systems which organically interact with the world. Such natural behavior is characterized by compliant performance that can initiate internal, and respond to external, force application in a dynamic environment. However, most of the current manipulators that support some form of haptic feedback, either solely derive proprioceptive sensation or only limit tactile sensors to the mechanical fingertips. These constraints are due to the technological challenges involved in high resolution, multi-point tactile perception. In this work, however, we take the opposite approach, emphasizing the role of full-finger tactile feedback in the refinement of manual capabilities. To this end, we propose and implement a control framework for sensorimotor coordination analogous to infant-level grasping and fixturing reflexes. This thesis details the mechanisms used to achieve these sensory, actuation, and control objectives, along with the design philosophies and biological influences behind them. The results of behavioral experiments with the tactilely-modulated control scheme are also described. The hope is to integrate the modular finger into an engineered analog of the human hand with a complete haptic system.by Jessica Lauren Banks.S.M