63 research outputs found
Indoor localization using place and motion signatures
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 2013.This electronic version was submitted and approved by the author's academic department as part of an electronic thesis pilot project. The certified thesis is available in the Institute Archives and Special Collections.Cataloged from department-submitted PDF version of thesis.Includes bibliographical references (p. 141-153).Most current methods for 802.11-based indoor localization depend on either simple radio propagation models or exhaustive, costly surveys conducted by skilled technicians. These methods are not satisfactory for long-term, large-scale positioning of mobile devices in practice. This thesis describes two approaches to the indoor localization problem, which we formulate as discovering user locations using place and motion signatures. The first approach, organic indoor localization, combines the idea of crowd-sourcing, encouraging end-users to contribute place signatures (location RF fingerprints) in an organic fashion. Based on prior work on organic localization systems, we study algorithmic challenges associated with structuring such organic location systems: the design of localization algorithms suitable for organic localization systems, qualitative and quantitative control of user inputs to "grow" an organic system from the very beginning, and handling the device heterogeneity problem, in which different devices have different RF characteristics. In the second approach, motion compatibility-based indoor localization, we formulate the localization problem as trajectory matching of a user motion sequence onto a prior map. Our method estimates indoor location with respect to a prior map consisting of a set of 2D floor plans linked through horizontal and vertical adjacencies. To enable the localization system, we present a motion classification algorithm that estimates user motions from the sensors available in commodity mobile devices. We also present a route network generation method, which constructs a graph representation of all user routes from legacy floor plans. Given these inputs, our HMM-based trajectory matching algorithm recovers user trajectories. The main contribution is the notion of path compatibility, in which the sequential output of a classifier of inertial data producing low-level motion estimates (standing still, walking straight, going upstairs, turning left etc.) is examined for metric/topological/semantic agreement with the prior map. We show that, using only proprioceptive data of the quality typically available on a modern smartphone, our method can recover the user's location to within several meters in one to two minutes after a "cold start."by Jun-geun Park.Ph.D
Indoor localisation by using wireless sensor nodes
This study is devoted to investigating and developing WSN based localisation approaches with high position accuracies indoors. The study initially summarises the design and implementation of localisation systems and WSN architecture together with the characteristics of LQI and RSSI values.
A fingerprint localisation approach is utilised for indoor positioning applications. A k-nearest neighbourhood algorithm (k-NN) is deployed, using Euclidean distances between the fingerprint database and the object fingerprints, to estimate unknown object positions. Weighted LQI and RSSI values are calculated and the k-NN algorithm with different weights is utilised to improve the position detection accuracy. Different weight functions are investigated with the fingerprint localisation technique. A novel weight function which produced the maximum position accuracy is determined and employed in calculations.
The study covered designing and developing the centroid localisation (CL) and weighted centroid localisation (WCL) approaches by using LQI values. A reference node localisation approach is proposed. A star topology of reference nodes are to be utilized and a 3-NN algorithm is employed to determine the nearest reference nodes to the object location. The closest reference nodes are employed to each nearest reference nodes and the object locations are calculated by using the differences between the closest and nearest reference nodes.
A neighbourhood weighted localisation approach is proposed between the nearest reference nodes in star topology. Weights between nearest reference nodes are calculated by using Euclidean and physical distances. The physical distances between the object and the nearest reference nodes are calculated and the trigonometric techniques are employed to derive the object coordinates.
An environmentally adaptive centroid localisation approach is proposed.Weighted standard deviation (STD) techniques are employed adaptively to estimate the unknown object positions. WSNs with minimum RSSI mean values are considered as reference nodes across the sensing area. The object localisation is carried out in two phases with respect to these reference nodes. Calculated object coordinates are later translated into the universal coordinate system to determine the actual object coordinates.
Virtual fingerprint localisation technique is introduced to determine the object locations by using virtual fingerprint database. A physical fingerprint database is organised in the form of virtual database by using LQI distribution functions. Virtual database elements are generated among the physical database elements with linear and exponential distribution functions between the fingerprint points. Localisation procedures are repeated with virtual database and localisation accuracies are improved compared to the basic fingerprint approach.
In order to reduce the computation time and effort, segmentation of the sensing area is introduced. Static and dynamic segmentation techniques are deployed. Segments are defined by RSS ranges and the unknown object is localised in one of these segments. Fingerprint techniques are applied only in the relevant segment to find the object location.
Finally, graphical user interfaces (GUI) are utilised with application program interfaces (API), in all calculations to visualise unknown object locations indoors
Interference charecterisation, location and bandwidth estimation in emerging WiFi networks
Wireless LAN technology based on the IEEE 802.11 standard, commonly referred
to as WiFi, has been hugely successful not only for the last hop access to the Internet
in home, office and hotspot scenarios but also for realising wireless backhaul in mesh
networks and for point -to -point long- distance wireless communication. This success
can be mainly attributed to two reasons: low cost of 802.11 hardware from reaching
economies of scale, and operation in the unlicensed bands of wireless spectrum.The popularity of WiFi, in particular for indoor wireless access at homes and offices,
has led to significant amount of research effort looking at the performance issues
arising from various factors, including interference, CSMA/CA based MAC protocol
used by 802.11 devices, the impact of link and physical layer overheads on application
performance, and spatio-temporal channel variations. These factors affect the performance
of applications and services that run over WiFi networks. In this thesis, we
experimentally investigate the effects of some of the above mentioned factors in the
context of emerging WiFi network scenarios such as multi- interface indoor mesh networks,
802.11n -based WiFi networks and WiFi networks with virtual access points
(VAPs). More specifically, this thesis comprises of four experimental characterisation
studies: (i) measure prevalence and severity of co- channel interference in urban WiFi
deployments; (ii) characterise interference in multi- interface indoor mesh networks;
(iii) study the effect of spatio-temporal channel variations, VAPs and multi -band operation
on WiFi fingerprinting based location estimation; and (iv) study the effects of
newly introduced features in 802.11n like frame aggregation (FA) on available bandwidth
estimation.With growing density of WiFi deployments especially in urban areas, co- channel
interference becomes a major factor that adversely affects network performance. To
characterise the nature of this phenomena at a city scale, we propose using a new measurement
methodology called mobile crowdsensing. The idea is to leverage commodity
smartphones and the natural mobility of people to characterise urban WiFi co- channel
interference. Specifically, we report measurement results obtained for Edinburgh, a
representative European city, on detecting the presence of deployed WiFi APs via the
mobile crowdsensing approach. These show that few channels in 2.4GHz are heavily
used and there is hardly any activity in the 5GHz band even though relatively it
has a greater number of available channels. Spatial analysis of spectrum usage reveals
that co- channel interference among nearby APs operating in the same channel
can be a serious problem with around 10 APs contending with each other in many locations. We find that the characteristics of WiFi deployments at city -scale are similar
to those of WiFi deployments in public spaces of different indoor environments. We
validate our approach in comparison with wardriving, and also show that our findings
generally match with previous studies based on other measurement approaches. As
an application of the mobile crowdsensing based urban WiFi monitoring, we outline a
cloud based WiFi router configuration service for better interference management with
global awareness in urban areas.For mesh networks, the use of multiple radio interfaces is widely seen as a practical
way to achieve high end -to -end network performance and better utilisation of
available spectrum. However this gives rise to another type of interference (referred to
as coexistence interference) due to co- location of multiple radio interfaces. We show
that such interference can be so severe that it prevents concurrent successful operation
of collocated interfaces even when they use channels from widely different frequency
bands. We propose the use of antenna polarisation to mitigate such interference and
experimentally study its benefits in both multi -band and single -band configurations. In
particular, we show that using differently polarised antennas on a multi -radio platform
can be a helpful counteracting mechanism for alleviating receiver blocking and adjacent
channel interference phenomena that underlie multi -radio coexistence interference.
We also validate observations about adjacent channel interference from previous
studies via direct and microscopic observation of MAC behaviour.Location is an indispensable information for navigation and sensing applications.
The rapidly growing adoption of smartphones has resulted in a plethora of mobile
applications that rely on position information (e.g., shopping apps that use user position
information to recommend products to users and help them to find what they want
in the store). WiFi fingerprinting is a popular and well studied approach for indoor
location estimation that leverages the existing WiFi infrastructure and works based on
the difference in strengths of the received AP signals at different locations. However,
understanding the impact of WiFi network deployment aspects such as multi -band
APs and VAPs has not received much attention in the literature. We first examine the
impact of various aspects underlying a WiFi fingerprinting system. Specifically, we
investigate different definitions for fingerprinting and location estimation algorithms
across different indoor environments ranging from a multi- storey office building to
shopping centres of different sizes. Our results show that the fingerprint definition
is as important as the choice of location estimation algorithm and there is no single
combination of these two that works across all environments or even all floors of a given environment. We then consider the effect of WiFi frequency bands (e.g., 2.4GHz
and 5GHz) and the presence of virtual access points (VAPs) on location accuracy with
WiFi fingerprinting. Our results demonstrate that lower co- channel interference in the
5GHz band yields more accurate location estimation. We show that the inclusion of
VAPs has a significant impact on the location accuracy of WiFi fingerprinting systems;
we analyse the potential reasons to explain the findings.End -to -end available bandwidth estimation (ABE) has a wide range of uses, from
adaptive application content delivery, transport-level transmission rate adaptation and
admission control to traffic engineering and peer node selection in peer -to- peer /overlay
networks [ 1, 2]. Given its importance, it has been received much research attention in
both wired data networks and legacy WiFi networks (based on 802.11 a/b /g standards),
resulting in different ABE techniques and tools proposed to optimise different criteria
and suit different scenarios. However, effects of new MAC/PHY layer enhancements
in new and next generation WiFi networks (based on 802.11n and 802.11ac
standards) have not been studied yet. We experimentally find that among different
new features like frame aggregation, channel bonding and MIMO modes (spacial division
multiplexing), frame aggregation has the most harmful effect as it has direct
effect on ABE by distorting the measurement probing traffic pattern commonly used
to estimate available bandwidth. Frame aggregation is also specified in both 802.11n
and 802.1 lac standards as a mandatory feature to be supported. We study the effect of
enabling frame aggregation, for the first time, on the performance of the ABE using an
indoor 802.11n wireless testbed. The analysis of results obtained using three tools -
representing two main Probe Rate Model (PRM) and Probe Gap Model (PGM) based
approaches for ABE - led us to come up with the two key principles of jumbo probes
and having longer measurement probe train sizes to counter the effects of aggregating
frames on the performance of ABE tools. Then, we develop a new tool, WBest+ that
is aware of the underlying frame aggregation by incorporating these principles. The
experimental evaluation of WBest+ shows more accurate ABE in the presence of frame
aggregation.Overall, the contributions of this thesis fall in three categories - experimental
characterisation, measurement techniques and mitigation/solution approaches for performance
problems in emerging WiFi network scenarios. The influence of various factors
mentioned above are all studied via experimental evaluation in a testbed or real - world setting. Specifically, co- existence interference characterisation and evaluation
of available bandwidth techniques are done using indoor testbeds, whereas characterisation of urban WiFi networks and WiFi fingerprinting based location estimation are
carried out in real environments. New measurement approaches are also introduced
to aid better experimental evaluation or proposed as new measurement tools. These
include mobile crowdsensing based WiFi monitoring; MAC/PHY layer monitoring of
co- existence interference; and WBest+ tool for available bandwidth estimation. Finally,
new mitigation approaches are proposed to address challenges and problems
identified throughout the characterisation studies. These include: a proposal for crowd - based interference management in large scale uncoordinated WiFi networks; exploiting
antenna polarisation diversity to remedy the effects of co- existence interference
in multi -interface platforms; taking advantage of VAPs and multi -band operation for
better location estimation; and introducing the jumbo frame concept and longer probe
train sizes to improve performance of ABE tools in next generation WiFi networks
Recent Advances in Indoor Localization Systems and Technologies
Despite the enormous technical progress seen in the past few years, the maturity of indoor localization technologies has not yet reached the level of GNSS solutions. The 23 selected papers in this book present the recent advances and new developments in indoor localization systems and technologies, propose novel or improved methods with increased performance, provide insight into various aspects of quality control, and also introduce some unorthodox positioning methods
Sensors and Systems for Indoor Positioning
This reprint is a reprint of the articles that appeared in Sensors' (MDPI) Special Issue on “Sensors and Systems for Indoor Positioning". The published original contributions focused on systems and technologies to enable indoor applications
Recommended from our members
Crowdsourcing based Room Localization on Smartphones
People spend approximately 90% of their time indoors, and human indoor activities are strongly correlated with the rooms they are in. Room localization, which identifies the room a person or smartphone is in, provides a powerful tool for characterizing human indoor activities and helping address challenges in public health, productivity, building management, etc. Designing a room localization system that is practically useful in real-world environments is challenging. First, due to the complex multi-path propagation problem, Wi-Fi signals obtained by smartphones are dynamic and noisy. Such noise obscures the unique relationship between Wi-Fi signals and individual rooms. Second, existing room localization methods require labor-intensive manual annotation of individual rooms. The process is time-consuming and expensive, which is a key limitation of existing room localization applications. Third, knowledge of indoor floorplans is often required by room localization applications. However, indoor floorplans are either unavailable or obtaining them requires slow, tedious, and error-prone manual labor. In addition, the overhead of room localization, e.g., energy consumption, imposed on personal smartphones must be low. To tackle those challenges, this thesis proposed a set of techniques: (1) an accurate temporal n-gram augmented Bayesian room positioning method that leverages the ordered sequence information of access points and users' daily motion pattern among rooms; (2) an automatic room fingerprinting approach that identifies in-room occupancy ``hotspot(s)" using density of Wi-Fi signals, and then learns the inter-zone correlation -- thereby distinguishing different rooms; (3) an automatic floorplan construction method that determines the geometries of individual rooms, as well as room adjacency information, and then constructs an indoor floorplan through hallway layout learning and force directed dilation; and (4) an energy-efficient trip detection framework that consists of two modes: the deliberation mode learns cell-id patterns using GPS/Wi-Fi based localization methods, and the intuition mode only uses cell-ids and learned patterns for trip detection
- …