Performance Analysis in IP-Based Industrial Communication Networks

S rostoucím počtem řídicích systémů a jejich distribuovanosti získávájí komunikační sítě na důležitosti a objevují se nové výzkumné trendy. Hlavní problematikou v této oblasti, narozdíl od dřívějších řídicích systémů využívajících dedikovaných komunikačních obvodů, je časově proměnné zpoždění měřicích a řídicích signálů způsobené paketově orientovanými komunikačními prostředky, jako např. Ethernet. Aspekty komunikace v reálném čase byly v těchto sítích již úspěšně vyřešeny. Nicméně, analýzy trendů trhu předpovídají budoucí využití také IP sítí v průmyslové komunikaci pro časově kritickou procesní vyměnu dat. IP komunikace má ovšem pouze omezenou podporu v instrumentaci pro průmyslovou automatizace. Tato výzva byla nedávno technicky vyřešena v rámci projektu Virtual Automation Networks (virtuální automatizační sítě - VAN) zapojením mechanismů kvality služeb (QoS), které jsou schopny zajistit měkkou úroveň komunikace v reálném čase. Předložená dizertační práce se zaměřuje na aspekty výkonnosti reálného času z analytického hlediska a nabízí prostředek pro hodnocení využitelnosti IP komunikace pro budoucí průmyslové aplikace. Hlavním cílem této dizertační práce je vytvoření vhodného modelovacího rámce založeného na network calculus, který pomůže provést worst-case výkonnostní analýzu časového chování IP komunikačních sítí a jejich prvků určených pro budoucí použití v průmyslové automatizaci. V práci byla použita empirická analýza pro určení dominantních faktorů ovlivňujících časového chování síťových zařízení a identifikaci parametrů modelů těchto zařízení. Empirická analýza využívá nástroj TestQoS vyvinutý pro tyto účely. Byla navržena drobná rozšíření rámce network calculus, která byla nutná pro modelování časového chování používaných zařízení. Bylo vytvořeno několik typových modelů zařízení jako výsledek klasifikace různých architektur síťových zařízení a empiricky zjištěných dominantních faktorů. U modelovaných zařízení byla využita nová metoda identifikace parametrů. Práce je zakončena validací časových modelů dvou síťových zařízení (přepínače a směrovače) oproti empirickým pozorováním.With the growing scale of control systems and their distributed nature, communication networks have been gaining importance and new research challenges have been appearing. The major problem, contrary to previously used control systems with dedicated communication circuits, is time-varying delay of control and measurement signals introduced by packet-switched networks, such as Ethernet. The real-time issues in these networks have been tackled by proper adaptations. Nevertheless, market trend analyses foresee also future adoptions of IP-based communication networks in industrial automation for time-critical run-time data exchange. IP-based communication has only a limited support from the existing instrumentation in industrial automation. This challenge has recently been technically tackled within the Virtual Automation Networks (VAN) project by adopting the quality of service (QoS) architecture delivering soft-real-time communication behaviour. This dissertation focuses on the real-time performance aspects from the analytical point of view and provides means for applicability assessment of IP-based communication for future industrial applications. The main objective of this dissertation is establishment of a relevant modelling framework based on network calculus which will assist worst-case performance analysis of temporal behaviour of IP-based communication networks and networking devices intended for future use in industrial automation. Empirical analysis was used to identify dominant factors influencing the temporal performance of networking devices and for model parameter identification. The empirical analysis makes use of the TestQoS tool developed for this purpose. Minor extensions to the network calculus framework were proposed enabling to model the required temporal behaviour of networking devices. Several exemplary models were inferred as a result of classification of different networking device architectures and empirically identified dominant factors. A novel method for parameter identification was used with the modelled devices. Finally, two temporal models of networking devices (a switch and a router) were validated against empirical observations.

Kommunikation und Bildverarbeitung in der Automation

In diesem Open Access-Tagungsband sind die besten Beiträge des 11. Jahreskolloquiums "Kommunikation in der Automation" (KommA 2020) und des 7. Jahreskolloquiums "Bildverarbeitung in der Automation" (BVAu 2020) enthalten. Die Kolloquien fanden am 28. und 29. Oktober 2020 statt und wurden erstmalig als digitale Webveranstaltung auf dem Innovation Campus Lemgo organisiert. Die vorgestellten neuesten Forschungsergebnisse auf den Gebieten der industriellen Kommunikationstechnik und Bildverarbeitung erweitern den aktuellen Stand der Forschung und Technik. Die in den Beiträgen enthaltenen anschauliche Anwendungsbeispiele aus dem Bereich der Automation setzen die Ergebnisse in den direkten Anwendungsbezug

Engineering Automation for Reliable Software Interim Progress Report (10/01/2000 - 09/30/2001)

Prepared for: U.S. Army Research Office P.O. Box 12211 Research Triangle Park, NC 27709-2211The objective of our effort is to develop a scientific basis for producing reliable software that is also flexible and cost effective for the DoD distributed software domain. This objective addresses the long term goals of increasing the quality of service provided by complex systems while reducing development risks, costs, and time. Our work focuses on "wrap and glue" technology based on a domain specific distributed prototype model. The key to making the proposed approach reliable, flexible, and cost-effective is the automatic generation of glue and wrappers based on a designer's specification. The "wrap and glue" approach allows system designers to concentrate on the difficult interoperability problems and defines solutions in terms of deeper and more difficult interoperability issues, while freeing designers from implementation details. Specific research areas for the proposed effort include technology enabling rapid prototyping, inference for design checking, automatic program generation, distributed real-time scheduling, wrapper and glue technology, and reliability assessment and improvement. The proposed technology will be integrated with past research results to enable a quantum leap forward in the state of the art for rapid prototyping.U. S. Army Research Office P.O. Box 12211 Research Triangle Park, NC 27709-22110473-MA-SPApproved for public release; distribution is unlimited

A Survey of Limitations and Enhancements of the IPv6 Routing Protocol for Low-power and Lossy Networks: A Focus on Core Operations

Driven by the special requirements of the Low-power and Lossy Networks (LLNs), the IPv6 Routing Protocol for LLNs (RPL) was standardized by the IETF some six years ago to tackle the routing issue in such networks. Since its introduction, however, numerous studies have pointed out that, in its current form, RPL suffers from issues that limit its efficiency and domain of applicability. Thus, several solutions have been proposed in the literature in an attempt to overcome these identified limitations. In this survey, we aim mainly to provide a comprehensive review of these research proposals assessing whether such proposals have succeeded in overcoming the standard reported limitations related to its core operations. Although some of RPL’s weaknesses have been addressed successfully, the study found that the proposed solutions remain deficient in overcoming several others. Hence, the study investigates where such proposals still fall short, the challenges and pitfalls to avoid, thus would help researchers formulate a clear foundation for the development of further successful extensions in future allowing the protocol to be applied more widely

QoS-aware architectures, technologies, and middleware for the cloud continuum

The recent trend of moving Cloud Computing capabilities to the Edge of the network is reshaping how applications and their middleware supports are designed, deployed, and operated. This new model envisions a continuum of virtual resources between the traditional cloud and the network edge, which is potentially more suitable to meet the heterogeneous Quality of Service (QoS) requirements of diverse application domains and next-generation applications. Several classes of advanced Internet of Things (IoT) applications, e.g., in the industrial manufacturing domain, are expected to serve a wide range of applications with heterogeneous QoS requirements and call for QoS management systems to guarantee/control performance indicators, even in the presence of real-world factors such as limited bandwidth and concurrent virtual resource utilization. The present dissertation proposes a comprehensive QoS-aware architecture that addresses the challenges of integrating cloud infrastructure with edge nodes in IoT applications. The architecture provides end-to-end QoS support by incorporating several components for managing physical and virtual resources. The proposed architecture features: i) a multilevel middleware for resolving the convergence between Operational Technology (OT) and Information Technology (IT), ii) an end-to-end QoS management approach compliant with the Time-Sensitive Networking (TSN) standard, iii) new approaches for virtualized network environments, such as running TSN-based applications under Ultra-low Latency (ULL) constraints in virtual and 5G environments, and iv) an accelerated and deterministic container overlay network architecture. Additionally, the QoS-aware architecture includes two novel middlewares: i) a middleware that transparently integrates multiple acceleration technologies in heterogeneous Edge contexts and ii) a QoS-aware middleware for Serverless platforms that leverages coordination of various QoS mechanisms and virtualized Function-as-a-Service (FaaS) invocation stack to manage end-to-end QoS metrics. Finally, all architecture components were tested and evaluated by leveraging realistic testbeds, demonstrating the efficacy of the proposed solutions

Internet of Things and Sensors Networks in 5G Wireless Communications

This book is a printed edition of the Special Issue Internet of Things and Sensors Networks in 5G Wireless Communications that was published in Sensors

Internet of Things and Sensors Networks in 5G Wireless Communications

The Internet of Things (IoT) has attracted much attention from society, industry and academia as a promising technology that can enhance day to day activities, and the creation of new business models, products and services, and serve as a broad source of research topics and ideas. A future digital society is envisioned, composed of numerous wireless connected sensors and devices. Driven by huge demand, the massive IoT (mIoT) or massive machine type communication (mMTC) has been identified as one of the three main communication scenarios for 5G. In addition to connectivity, computing and storage and data management are also long-standing issues for low-cost devices and sensors. The book is a collection of outstanding technical research and industrial papers covering new research results, with a wide range of features within the 5G-and-beyond framework. It provides a range of discussions of the major research challenges and achievements within this topic