Characteristics of flight simulator visual systems

The physical parameters of the flight simulator visual system that characterize the system and determine its fidelity are identified and defined. The characteristics of visual simulation systems are discussed in terms of the basic categories of spatial, energy, and temporal properties corresponding to the three fundamental quantities of length, mass, and time. Each of these parameters are further addressed in relation to its effect, its appropriate units or descriptors, methods of measurement, and its use or importance to image quality

A Virtual Testbed for Fish-Tank Virtual Reality: Improving Calibration with a Virtual-in-Virtual Display

With the development of novel calibration techniques for multimedia projectors and curved projection surfaces, volumetric 3D displays are becoming easier and more affordable to build. The basic requirements include a display shape that defines the volume (e.g. a sphere, cylinder, or cuboid) and a tracking system to provide each user's location for the perspective corrected rendering. When coupled with modern graphics cards, these displays are capable of high resolution, low latency, high frame rate, and even stereoscopic rendering; however, like many previous studies have shown, every component must be precisely calibrated for a compelling 3D effect. While human perceptual requirements have been extensively studied for head-tracked displays, most studies featured seated users in front of a flat display. It remains unclear if results from these flat display studies are applicable to newer, walk-around displays with enclosed or curved shapes. To investigate these issues, we developed a virtual testbed for volumetric head-tracked displays that can measure calibration accuracy of the entire system in real-time. We used this testbed to investigate visual distortions of prototype curved displays, improve existing calibration techniques, study the importance of stereo to performance and perception, and validate perceptual calibration with novice users. Our experiments show that stereo is important for task performance, but requires more accurate calibration, and that novice users can make effective use of perceptual calibration tools. We also propose a novel, real-time calibration method that can be used to fine-tune an existing calibration using perceptual feedback. The findings from this work can be used to build better head-tracked volumetric displays with an unprecedented amount of 3D realism and intuitive calibration tools for novice users

Selected Problems in Photogrammetric Systems Analysis

Disertační práce se zabývá vybranými partiemi digitální fotogrammetrie. V první části práce je definované téma a popsán současný stav poznání. V následujících kapitolách jsou postupně řešeny čtyři dílčí navzájem navazující cíle. První oblastí je návrh metody pro hledání souhlasných bodů v obraze. Byly navrženy dvě nové metody. První z nich používá konverzi snímků do nepravých barev a druhá využívá pravděpodobností model získaný ze známých párů souhlasných bodů. Druhým tématem je analýza přesnosti výsledné rekonstrukce prostorových bodů. Postupně je analyzován vliv různých faktorů na přesnost rekonstrukce. Stěžejní oblastí je zkoumání vlivu chybného zarovnání kamer a chyby v určení souhlasných bodů. Třetím tématem je tvorba hloubkových map. Byly navrženy dva postupy. První přístup spočívá v kombinaci pasivní a aktivní metody druhý přístup vychází z pasivní metody a využívá spojitosti hloubkové mapy. Poslední zvolenou oblastí zájmu je hodnocení kvality 3D videa. Byly provedeny a statisticky vyhodnoceny subjektvní testy 3D vjemu pro různé zobrazovací systémy v závislosti na úhlu pozorováníThis dissertation deals with selected topics of digital photogrammetry. The problem is defined and the state of the art is described in the first part of the dissertation. Four specified aims are solved. The proposal of the method for finding corresponding points is the first topic. Two new methods were proposed. The first method uses conversion of an image to pseudo- colors. The second method used a probabilistic model obtained from the known pairs of the corresponding points. The analysis of the accuracy of the reconstruction is the second solved topic. The influence of the various aspects to the accuracy of the reconstruction is analyzed. The most attention is paid to incorrect camera alignment and errors in finding corresponding points. The third topic is estimation of the depth maps. The two method were proposed. The first method is based on the combination of the passive and active method. The second wholly passive approach uses continuity of the depth map. The last investigative topic is quality of experience of the 3D videos. The subjective tests of the perception of 3D content for the various 3D displaying systems were performed. The dependency of the perception on the viewing angle was also investigated.

Reasoning about space for human-robot interaction

L'interaction Homme-Robot est un domaine de recherche qui se développe de manière exponentielle durant ces dernières années, ceci nous procure de nouveaux défis au raisonnement géométrique du robot et au partage d'espace. Le robot pour accomplir une tâche, doit non seulement raisonner sur ses propres capacités, mais également prendre en considération la perception humaine, c'est à dire "Le robot doit se placer du point de vue de l'humain". Chez l'homme, la capacité de prise de perspective visuelle commence à se manifester à partir du 24ème mois. Cette capacité est utilisée pour déterminer si une autre personne peut voir un objet ou pas. La mise en place de ce genre de capacités sociales améliorera les capacités cognitives du robot et aidera le robot pour une meilleure interaction avec les hommes. Dans ce travail, nous présentons un mécanisme de raisonnement spatial de point de vue géométrique qui utilise des concepts psychologiques de la "prise de perspective" et "de la rotation mentale" dans deux cadres généraux: - La planification de mouvement pour l'interaction homme-robot: le robot utilise "la prise de perspective égocentrique" pour évaluer plusieurs configurations où le robot peut effectuer différentes tâches d'interaction. - Une interaction face à face entre l'homme et le robot : le robot emploie la prise de point de vue de l'humain comme un outil géométrique pour comprendre l'attention et l'intention humaine afin d'effectuer des tâches coopératives.Human Robot Interaction is a research area that is growing exponentially in last years. This fact brings new challenges to the robot's geometric reasoning and space sharing abilities. The robot should not only reason on its own capacities but also consider the actual situation by looking from human's eyes, thus "putting itself into human's perspective". In humans, the "visual perspective taking" ability begins to appear by 24 months of age and is used to determine if another person can see an object or not. The implementation of this kind of social abilities will improve the robot's cognitive capabilities and will help the robot to perform a better interaction with human beings. In this work, we present a geometric spatial reasoning mechanism that employs psychological concepts of "perspective taking" and "mental rotation" in two general frameworks: - Motion planning for human-robot interaction: where the robot uses "egocentric perspective taking" to evaluate several configurations where the robot is able to perform different tasks of interaction. - A face-to-face human-robot interaction: where the robot uses perspective taking of the human as a geometric tool to understand the human attention and intention in order to perform cooperative tasks

Acceleration Techniques for Photo Realistic Computer Generated Integral Images

The research work presented in this thesis has approached the task of accelerating the generation of photo-realistic integral images produced by integral ray tracing. Ray tracing algorithm is a computationally exhaustive algorithm, which spawns one ray or more through each pixel of the pixels forming the image, into the space containing the scene. Ray tracing integral images consumes more processing time than normal images. The unique characteristics of the 3D integral camera model has been analysed and it has been shown that different coherency aspects than normal ray tracing can be investigated in order to accelerate the generation of photo-realistic integral images. The image-space coherence has been analysed describing the relation between rays and projected shadows in the scene rendered. Shadow cache algorithm has been adapted in order to minimise shadow intersection tests in integral ray tracing. Shadow intersection tests make the majority of the intersection tests in ray tracing. Novel pixel-tracing styles are developed uniquely for integral ray tracing to improve the image-space coherence and the performance of the shadow cache algorithm. Acceleration of the photo-realistic integral images generation using the image-space coherence information between shadows and rays in integral ray tracing has been achieved with up to 41 % of time saving. Also, it has been proven that applying the new styles of pixel-tracing does not affect of the scalability of integral ray tracing running over parallel computers. The novel integral reprojection algorithm has been developed uniquely through geometrical analysis of the generation of integral image in order to use the tempo-spatial coherence information within the integral frames. A new derivation of integral projection matrix for projecting points through an axial model of a lenticular lens has been established. Rapid generation of 3D photo-realistic integral frames has been achieved with a speed four times faster than the normal generation

Perceptual Modeling and Reproduction of Gloss

The reproduction of gloss on displays is generally not based on perception and as a consequence does not guarantee the best visualization of a real material. The reproduction is composed of four different steps: measurement, modeling, rendering, and display. The minimum number of measurements required to approximate a real material is unknown. The error metrics used to approximate measurements with analytical BRDF models are not based on perception, and the best visual approximation is not always obtained. Finally, the gloss perception difference between real objects and objects seen on displays has not sufficiently been studied and might be influencing the observer judgement. This thesis proposes a systematic, scalable, and perceptually based workflow to represent real materials on displays. First, the gloss perception difference between real objects and objects seen on displays was studied. Second, the perceptual performance of the error metrics currently in use was evaluated. Third, a projection into a perceptual gloss space was defined, enabling the computation of a perceptual gloss distance measure. Fourth, the uniformity of the gloss space was improved by defining a new gloss difference equation. Finally, a systematic, scalable, and perceptually based workflow was defined using cost-effective instruments