4,387 research outputs found
Cleaning sky survey databases using Hough Transform and Renewal String approaches
Large astronomical databases obtained from sky surveys such as the
SuperCOSMOS Sky Survey (SSS) invariably suffer from spurious records coming
from artefactual effects of the telescope, satellites and junk objects in orbit
around earth and physical defects on the photographic plate or CCD. Though
relatively small in number these spurious records present a significant problem
in many situations where they can become a large proportion of the records
potentially of interest to a given astronomer. Accurate and robust techniques
are needed for locating and flagging such spurious objects, and we are
undertaking a programme investigating the use of machine learning techniques in
this context. In this paper we focus on the four most common causes of unwanted
records in the SSS: satellite or aeroplane tracks, scratches, fibres and other
linear phenomena introduced to the plate, circular halos around bright stars
due to internal reflections within the telescope and diffraction spikes near to
bright stars. Appropriate techniques are developed for the detection of each of
these. The methods are applied to the SSS data to develop a dataset of spurious
object detections, along with confidence measures, which can allow these
unwanted data to be removed from consideration. These methods are general and
can be adapted to other astronomical survey data.Comment: Accepted for MNRAS. 17 pages, latex2e, uses mn2e.bst, mn2e.cls,
md706.bbl, shortbold.sty (all included). All figures included here as low
resolution jpegs. A version of this paper including the figures can be
downloaded from http://www.anc.ed.ac.uk/~amos/publications.html and more
details on this project can be found at
http://www.anc.ed.ac.uk/~amos/sattrackres.htm
Challenges in Partially-Automated Roadway Feature Mapping Using Mobile Laser Scanning and Vehicle Trajectory Data
Connected vehicle and driver's assistance applications are greatly
facilitated by Enhanced Digital Maps (EDMs) that represent roadway features
(e.g., lane edges or centerlines, stop bars). Due to the large number of
signalized intersections and miles of roadway, manual development of EDMs on a
global basis is not feasible. Mobile Terrestrial Laser Scanning (MTLS) is the
preferred data acquisition method to provide data for automated EDM
development. Such systems provide an MTLS trajectory and a point cloud for the
roadway environment. The challenge is to automatically convert these data into
an EDM. This article presents a new processing and feature extraction method,
experimental demonstration providing SAE-J2735 map messages for eleven example
intersections, and a discussion of the results that points out remaining
challenges and suggests directions for future research.Comment: 6 pages, 5 figure
Automated segmentation, detection and fitting of piping elements from terrestrial LIDAR data
Since the invention of light detection and ranging (LIDAR) in the early 1960s, it has been adopted for use in numerous applications, from topographical mapping with airborne LIDAR platforms to surveying of urban sites with terrestrial LIDAR systems. Static terrestrial LIDAR has become an especially effective tool for surveying, in some cases replacing traditional techniques such as electronic total stations and GPS methods. Current state-of-the-art LIDAR scanners have very fine spatial resolution, generating precise 3D point cloud data with millimeter accuracy. Therefore, LIDAR data can provide 3D details of a scene with an unprecedented level of details. However, automated exploitation of LIDAR data is challenging, due to the non-uniform spatial sampling of the point clouds as well as to the massive volumes of data, which may range from a few million points to hundreds of millions of points depending on the size and complexity of the scene being scanned. ^ This dissertation focuses on addressing these challenges to automatically exploit large LIDAR point clouds of piping systems in industrial sites, such as chemical plants, oil refineries, and steel mills. A complete processing chain is proposed in this work, using raw LIDAR point clouds as input and generating cylinder parameter estimates for pipe segments as the output, which could then be used to produce computer aided design (CAD) models of pipes. The processing chain consists of three stages: (1) segmentation of LIDAR point clouds, (2) detection and identification of piping elements, and (3) cylinder fitting and parameter estimation. The final output of the cylinder fitting stage gives the estimated orientation, position, and radius of each detected pipe element. ^ A robust octree-based split and merge segmentation algorithm is proposed in this dissertation that can efficiently process LIDAR data. Following octree decomposition of the point cloud, graph theory analysis is used during the splitting process to separate points within each octant into components based on spatial connectivity. A series of connectivity criteria (proximity, orientation, and curvature) are developed for the merging process, which exploits contextual information to effectively merge cylindrical segments into complete pipes and planar segments into complete walls. Furthermore, by conducting surface fitting of segments and analyzing their principal curvatures, the proposed segmentation approach is capable of detecting and identifying the piping segments. ^ A novel cylinder fitting technique is proposed to accurately estimate the cylinder parameters for each detected piping segment from the terrestrial LIDAR point cloud. Specifically, the orientation, radius, and position of each piping element must be robustly estimated in the presence of noise. An original formulation has been developed to estimate the cylinder axis orientation using gradient descent optimization of an angular distance cost function. The cost function is based on the concept that surface normals of points in a cylinder point cloud are perpendicular to the cylinder axis. The key contribution of this algorithm is its capability to accurately estimate the cylinder orientation in the presence of noise without requiring a good initial starting point. After estimation of the cylinder\u27s axis orientation, the radius and position are then estimated in the 2D space formed from the projection of the 3D cylinder point cloud onto the plane perpendicular to the cylinder\u27s axis. With these high quality approximations, a least squares estimation in 3D is made for the final cylinder parameters. ^ Following cylinder fitting, the estimated parameters of each detected piping segment are used to generate a CAD model of the piping system. The algorithms and techniques in this dissertation form a complete processing chain that can automatically exploit large LIDAR point cloud of piping systems and generate CAD models
Hough Transform Track Reconstruction in the Cathode Strip Chambers in ATLAS
The world's largest and highest energy particle accelerator, the Large Hadron Collider (LHC), will collide two highly energetic proton beams in an attempt to discover a wide range of new physics. Among which, the primary ambitions are the discovery of the Higgs boson and suppersymmetric particles. ATLAS, one of its primary particle detectors, was designed as a general-purpose detector covering a broad range of energies and physical processes. A special emphasis on accurate muon tracking has led the ATLAS collaboration to design a stand-alone Muon Spectrometer, an extremely large tracking system extending all the way around the detector. Due to its immense size and range, parts of the spectrometer were designed to withstand a high rate of radiation, sifting the muon signals from the rest of the signals (primarily neutrons and photons). The Cathode Strip Chambers (CSCs) are special multiwire proportional chambers placed in the high region on of the Muon Spectrometer, where flux of background particles is highest. Their purpose is to efficiently filter out the background particle, tracking only the muons traversing it with high degree of accuracy. In order to do that, this special algorithm was designed using a novel modification of the Hough Transform. This thesis will detail the key elements of this algorithm, how it is used for better muon track detection and parameterization, and give a preliminary evaluation of the perform ance of this algorithm
Real-time edge tracking using a tactile sensor
Object recognition through the use of input from multiple sensors is an important aspect of an autonomous manipulation system. In tactile object recognition, it is necessary to determine the location and orientation of object edges and surfaces. A controller is proposed that utilizes a tactile sensor in the feedback loop of a manipulator to track along edges. In the control system, the data from the tactile sensor is first processed to find edges. The parameters of these edges are then used to generate a control signal to a hybrid controller. Theory is presented for tactile edge detection and an edge tracking controller. In addition, experimental verification of the edge tracking controller is presented
3D Geometric Analysis of Tubular Objects based on Surface Normal Accumulation
This paper proposes a simple and efficient method for the reconstruction and
extraction of geometric parameters from 3D tubular objects. Our method
constructs an image that accumulates surface normal information, then peaks
within this image are located by tracking. Finally, the positions of these are
optimized to lie precisely on the tubular shape centerline. This method is very
versatile, and is able to process various input data types like full or partial
mesh acquired from 3D laser scans, 3D height map or discrete volumetric images.
The proposed algorithm is simple to implement, contains few parameters and can
be computed in linear time with respect to the number of surface faces. Since
the extracted tube centerline is accurate, we are able to decompose the tube
into rectilinear parts and torus-like parts. This is done with a new linear
time 3D torus detection algorithm, which follows the same principle of a
previous work on 2D arc circle recognition. Detailed experiments show the
versatility, accuracy and robustness of our new method.Comment: in 18th International Conference on Image Analysis and Processing,
Sep 2015, Genova, Italy. 201
- …