Multi-service Signal Multiplexing and Isolation for Physical-Layer Network Slicing (PNS)

Network slicing has been identified as one of the most important features for 5G and beyond to enable operators to utilize networks on an as-a-service basis and meet the wide range of use cases. In physical layer, the frequency and time resources are split into slices to cater for the services with individual optimal designs, resulting in services/slices having different baseband numerologies (e.g., subcarrier spacing) and / or radio frequency (RF) front-end configurations. In such a system, the multi-service signal multiplexing and isolation among the service/slices are critical for the Physical-Layer Network Slicing (PNS) since orthogonality is destroyed and significant inter-service/ slice-band-interference (ISBI) may be generated. In this paper, we first categorize four PNS cases according to the baseband and RF configurations among the slices. The system model is established by considering a low out of band emission (OoBE) waveform operating in the service/slice frequency band to mitigate the ISBI. The desired signal and interference for the two slices are derived. Consequently, one-tap channel equalization algorithms are proposed based on the derived model. The developed system models establish a framework for further interference analysis, ISBI cancelation algorithms, system design and parameter selection (e.g., guard band), to enable spectrum efficient network slicing

Multi-service systems: an enabler of flexible 5G air-interface

Multi-service system is an enabler to flexibly support diverse communication requirements for the next generation wireless communications. In such a system, multiple types of services co-exist in one baseband system with each service having its optimal frame structure and low out of band emission (OoBE) waveforms operating on the service frequency band to reduce the inter-service-band-interference (ISvcBI). In this article, a framework for multi-service system is established and the challenges and possible solutions are studied. The multi-service system implementation in both time and frequency domain is discussed. Two representative subband filtered multicarrier (SFMC) waveforms: filtered orthogonal frequency division multiplexing (F-OFDM) and universal filtered multi-carrier (UFMC) are considered in this article. Specifically, the design methodology, criteria, orthogonality conditions and prospective application scenarios in the context of 5G are discussed. We consider both single-rate (SR) and multi-rate (MR) signal processing methods. Compared with the SR system, the MR system has significantly reduced computational complexity at the expense of performance loss due to inter-subband-interference (ISubBI) in MR systems. The ISvcBI and ISubBI in MR systems are investigated with proposed low-complexity interference cancelation algorithms to enable the multi-service operation in low interference level conditions

Waveform Design for 5G and Beyond

5G is envisioned to improve major key performance indicators (KPIs), such as peak data rate, spectral efficiency, power consumption, complexity, connection density, latency, and mobility. This chapter aims to provide a complete picture of the ongoing 5G waveform discussions and overviews the major candidates. It provides a brief description of the waveform and reveals the 5G use cases and waveform design requirements. The chapter presents the main features of cyclic prefix-orthogonal frequency-division multiplexing (CP-OFDM) that is deployed in 4G LTE systems. CP-OFDM is the baseline of the 5G waveform discussions since the performance of a new waveform is usually compared with it. The chapter examines the essential characteristics of the major waveform candidates along with the related advantages and disadvantages. It summarizes and compares the key features of different waveforms.Comment: 22 pages, 21 figures, 2 tables; accepted version (The URL for the final version: https://onlinelibrary.wiley.com/doi/abs/10.1002/9781119333142.ch2

Multicarrier Waveform Candidates for Beyond 5G

To fulfil the requirements of 5G vision of “everything everywhere and always connected”, a new waveform must contain the features to support a greater number of users on high data rate. Although Orthogonal Frequency Division Multiplexing (OFDM) has been widely used in the 4th generation, but it can hardly meet the needs of 5G vision. However, many waveforms have been proposed to cope with new challenges. In this paper, we have presented a comparative analysis of several waveform candidates (FBMC, GFDM, UFMC, F-OFDM) on the basis of complexity, hardware design and other valuable characteristics. Filter based waveforms have much better Out of Band Emission (OoBE) as compared to OFDM. However, F-OFDM has smaller filter length compared to filter-based waveforms and provides better transmission with multiple antenna system without any extra processing, while providing flexible frequency multiplexing, shorter latency and relaxed synchronization as compared to other waveforms.This work is funded by Marie Skłodowska-Curie Actions (MSCA) ITN TeamUp5G (813391), ORCIP, CONQUEST (CMU/ECE/0030/2017), by UIDB/EEA/50008/2020, and by COST CA 15104. TeamUp5G project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie project number 813391.info:eu-repo/semantics/acceptedVersio

Efficient Fast-Convolution-Based Waveform Processing for 5G Physical Layer

This paper investigates the application of fast-convolution (FC) filtering schemes for flexible and effective waveform generation and processing in the fifth generation (5G) systems. FC-based filtering is presented as a generic multimode waveform processing engine while, following the progress of 5G new radio standardization in the Third-Generation Partnership Project, the main focus is on efficient generation and processing of subband-filtered cyclic prefix orthogonal frequency-division multiplexing (CP-OFDM) signals. First, a matrix model for analyzing FC filter processing responses is presented and used for designing optimized multiplexing of filtered groups of CP-OFDM physical resource blocks (PRBs) in a spectrally well-localized manner, i.e., with narrow guardbands. Subband filtering is able to suppress interference leakage between adjacent subbands, thus supporting independent waveform parametrization and different numerologies for different groups of PRBs, as well as asynchronous multiuser operation in uplink. These are central ingredients in the 5G waveform developments, particularly at sub-6-GHz bands. The FC filter optimization criterion is passband error vector magnitude minimization subject to a given subband band-limitation constraint. Optimized designs with different guardband widths, PRB group sizes, and essential design parameters are compared in terms of interference levels and implementation complexity. Finally, extensive coded 5G radio link simulation results are presented to compare the proposed approach with other subband-filtered CP-OFDM schemes and time-domain windowing methods, considering cases with different numerologies or asynchronous transmissions in adjacent subbands. Also the feasibility of using independent transmitter and receiver processing for CP-OFDM spectrum control is demonstrated

PAPR Reduction Using Huffman and Arithmetic Coding Techniques in F-OFDM System

Filtered orthogonal frequency division multiplexing (F-OFDM) was introduced to overcome the high side lobes in the OFDM system. Filtering is implemented in the system to reduce the out-of-band emission (OOBE) for the spectrum utilization and to meet the diversified expectation of the upcoming 5G networks. The main drawback in the system is the high peak to average ratio (PAPR). This paper investigates the method used in reducing the PAPR in the F-OFDM system. The proposed method using the block coding technique to overcome the problem of high PAPR are the Arithmetic coding and Huffman coding. This research evaluates the performance of F-OFDM system based on the PAPR values. From the simulation results, the PAPR reduction of the Arithmetic coding is 8.9% lower, while the Huffman Coding is 6.7% lower in the F-OFDM system. The results prove that the Arithmetic Coding will out-perform the Huffman coding in the F-OFDM system

Filtered OFDM systems, algorithms and performance analysis for 5G and beyond

Filtered orthogonal frequency division multiplexing (F-OFDM) system is a promising waveform for 5G and beyond to enable multi-service system and spectrum efficient network slicing. However, the performance for F-OFDM systems has not been systematically analyzed in literature. In this paper, we first establish a mathematical model for F-OFDM system and derive the conditions to achieve the interference-free one-tap channel equalization. In the practical cases (e.g., insufficient guard interval, asynchronous transmission, etc.), the analytical expressions for inter-symbol-interference (ISI), inter-carrier-interference (ICI) and adjacent-carrier-interference (ACI) are derived, where the last term is considered as one of the key factors for asynchronous transmissions. Based on the framework, an optimal power compensation matrix is derived to make all of the subcarriers having the same ergodic performance. Another key contribution of the paper is that we propose a multi-rate F-OFDM system to enable low complexity low cost communication scenarios such as narrow band Internet of Things (IoT), at the cost of generating inter-subband-interference (ISubBI). Low computational complexity algorithms are proposed to cancel the ISubBI. The result shows that the derived analytical expressions match the simulation results, and the proposed ISubBI cancelation algorithms can significantly save the original F-OFDM complexity (up to 100 times) without significant performance los

Channel Estimation and Optimal Pilot Signals for Universal Filtered Multi-Carrier (UFMC) Systems

We propose channel estimation algorithms and pilot signal optimization for the universal filtered multi-carrier (UFMC) system based on the comb-type pilot pattern. By considering the least square linear interpolation (LSLI), discrete Fourier transform (DFT), minimum mean square error (MMSE) and relaxed MMSE (RMMSE) channel estimators, we formulate the pilot signals optimization problem by minimizing the estimation MSE subject to the power constraint on pilot tones. The closed-form optimal solutions and minimum MSE are derived for LSLI, DFT, MMSE and RMMSE estimators

BER Performance Analysis of OFDM, W-OFDM and F-OFDM for 5G Wireless Communications

Orthogonal Frequency Division Multiplexing (OFDM) is a pertinent multi-carrier modulation approach that is more immune to frequency selective fading. In the 5G waveform, in order to reduce the traffic in OFDM based on technology, it is important to re-size the bandwidth. Consequently, a spectrally localized waveform technology called Filtered Orthogonal Frequency Division Multiplexing (F-OFDM), which is primarily an approach to sub-band based filtering is introduced. Windowed-OFDM (W-OFDM), which is basically a classical OFDM scheme where each symbol is windowed and overlapped in the time domain. Each of the different subbands can be processed according to the traffic scenario