Transmit and Receive Signal Processing for MIMO Terrestrial Broadcast Systems

[EN] Multiple-Input Multiple-Output (MIMO) technology in Digital Terrestrial Television (DTT) networks has the potential to increase the spectral efficiency and improve network coverage to cope with the competition of limited spectrum use (e.g., assignment of digital dividend and spectrum demands of mobile broadband), the appearance of new high data rate services (e.g., ultra-high definition TV - UHDTV), and the ubiquity of the content (e.g., fixed, portable, and mobile). It is widely recognised that MIMO can provide multiple benefits such as additional receive power due to array gain, higher resilience against signal outages due to spatial diversity, and higher data rates due to the spatial multiplexing gain of the MIMO channel. These benefits can be achieved without additional transmit power nor additional bandwidth, but normally come at the expense of a higher system complexity at the transmitter and receiver ends. The final system performance gains due to the use of MIMO directly depend on physical characteristics of the propagation environment such as spatial correlation, antenna orientation, and/or power imbalances experienced at the transmit aerials. Additionally, due to complexity constraints and finite-precision arithmetic at the receivers, it is crucial for the overall system performance to carefully design specific signal processing algorithms. This dissertation focuses on transmit and received signal processing for DTT systems using MIMO-BICM (Bit-Interleaved Coded Modulation) without feedback channel to the transmitter from the receiver terminals. At the transmitter side, this thesis presents investigations on MIMO precoding in DTT systems to overcome system degradations due to different channel conditions. At the receiver side, the focus is given on design and evaluation of practical MIMO-BICM receivers based on quantized information and its impact in both the in-chip memory size and system performance. These investigations are carried within the standardization process of DVB-NGH (Digital Video Broadcasting - Next Generation Handheld) the handheld evolution of DVB-T2 (Terrestrial - Second Generation), and ATSC 3.0 (Advanced Television Systems Committee - Third Generation), which incorporate MIMO-BICM as key technology to overcome the Shannon limit of single antenna communications. Nonetheless, this dissertation employs a generic approach in the design, analysis and evaluations, hence, the results and ideas can be applied to other wireless broadcast communication systems using MIMO-BICM.[ES] La tecnología de múltiples entradas y múltiples salidas (MIMO) en redes de Televisión Digital Terrestre (TDT) tiene el potencial de incrementar la eficiencia espectral y mejorar la cobertura de red para afrontar las demandas de uso del escaso espectro electromagnético (e.g., designación del dividendo digital y la demanda de espectro por parte de las redes de comunicaciones móviles), la aparición de nuevos contenidos de alta tasa de datos (e.g., ultra-high definition TV - UHDTV) y la ubicuidad del contenido (e.g., fijo, portable y móvil). Es ampliamente reconocido que MIMO puede proporcionar múltiples beneficios como: potencia recibida adicional gracias a las ganancias de array, mayor robustez contra desvanecimientos de la señal gracias a la diversidad espacial y mayores tasas de transmisión gracias a la ganancia por multiplexado del canal MIMO. Estos beneficios se pueden conseguir sin incrementar la potencia transmitida ni el ancho de banda, pero normalmente se obtienen a expensas de una mayor complejidad del sistema tanto en el transmisor como en el receptor. Las ganancias de rendimiento finales debido al uso de MIMO dependen directamente de las características físicas del entorno de propagación como: la correlación entre los canales espaciales, la orientación de las antenas y/o los desbalances de potencia sufridos en las antenas transmisoras. Adicionalmente, debido a restricciones en la complejidad y aritmética de precisión finita en los receptores, es fundamental para el rendimiento global del sistema un diseño cuidadoso de algoritmos específicos de procesado de señal. Esta tesis doctoral se centra en el procesado de señal, tanto en el transmisor como en el receptor, para sistemas TDT que implementan MIMO-BICM (Bit-Interleaved Coded Modulation) sin canal de retorno hacia el transmisor desde los receptores. En el transmisor esta tesis presenta investigaciones en precoding MIMO en sistemas TDT para superar las degradaciones del sistema debidas a diferentes condiciones del canal. En el receptor se presta especial atención al diseño y evaluación de receptores prácticos MIMO-BICM basados en información cuantificada y a su impacto tanto en la memoria del chip como en el rendimiento del sistema. Estas investigaciones se llevan a cabo en el contexto de estandarización de DVB-NGH (Digital Video Broadcasting - Next Generation Handheld), la evolución portátil de DVB-T2 (Second Generation Terrestrial), y ATSC 3.0 (Advanced Television Systems Commitee - Third Generation) que incorporan MIMO-BICM como clave tecnológica para superar el límite de Shannon para comunicaciones con una única antena. No obstante, esta tesis doctoral emplea un método genérico tanto para el diseño, análisis y evaluación, por lo que los resultados e ideas pueden ser aplicados a otros sistemas de comunicación inalámbricos que empleen MIMO-BICM.[CA] La tecnologia de múltiples entrades i múltiples eixides (MIMO) en xarxes de Televisió Digital Terrestre (TDT) té el potencial d'incrementar l'eficiència espectral i millorar la cobertura de xarxa per a afrontar les demandes d'ús de l'escàs espectre electromagnètic (e.g., designació del dividend digital i la demanda d'espectre per part de les xarxes de comunicacions mòbils), l'aparició de nous continguts d'alta taxa de dades (e.g., ultra-high deffinition TV - UHDTV) i la ubiqüitat del contingut (e.g., fix, portàtil i mòbil). És àmpliament reconegut que MIMO pot proporcionar múltiples beneficis com: potència rebuda addicional gràcies als guanys de array, major robustesa contra esvaïments del senyal gràcies a la diversitat espacial i majors taxes de transmissió gràcies al guany per multiplexat del canal MIMO. Aquests beneficis es poden aconseguir sense incrementar la potència transmesa ni l'ample de banda, però normalment s'obtenen a costa d'una major complexitat del sistema tant en el transmissor com en el receptor. Els guanys de rendiment finals a causa de l'ús de MIMO depenen directament de les característiques físiques de l'entorn de propagació com: la correlació entre els canals espacials, l'orientació de les antenes, i/o els desequilibris de potència patits en les antenes transmissores. Addicionalment, a causa de restriccions en la complexitat i aritmètica de precisió finita en els receptors, és fonamental per al rendiment global del sistema un disseny acurat d'algorismes específics de processament de senyal. Aquesta tesi doctoral se centra en el processament de senyal tant en el transmissor com en el receptor per a sistemes TDT que implementen MIMO-BICM (Bit-Interleaved Coded Modulation) sense canal de tornada cap al transmissor des dels receptors. En el transmissor aquesta tesi presenta recerques en precoding MIMO en sistemes TDT per a superar les degradacions del sistema degudes a diferents condicions del canal. En el receptor es presta especial atenció al disseny i avaluació de receptors pràctics MIMO-BICM basats en informació quantificada i al seu impacte tant en la memòria del xip com en el rendiment del sistema. Aquestes recerques es duen a terme en el context d'estandardització de DVB-NGH (Digital Video Broadcasting - Next Generation Handheld), l'evolució portàtil de DVB-T2 (Second Generation Terrestrial), i ATSC 3.0 (Advanced Television Systems Commitee - Third Generation) que incorporen MIMO-BICM com a clau tecnològica per a superar el límit de Shannon per a comunicacions amb una única antena. No obstant açò, aquesta tesi doctoral empra un mètode genèric tant per al disseny, anàlisi i avaluació, per la qual cosa els resultats i idees poden ser aplicats a altres sistemes de comunicació sense fils que empren MIMO-BICM.Vargas Paredero, DE. (2016). Transmit and Receive Signal Processing for MIMO Terrestrial Broadcast Systems [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/66081TESISPremiad

Multidimensional Optimized Optical Modulation Formats

This chapter overviews the relatively large body of work (experimental and theoretical) on modulation formats for optical coherent links. It first gives basic definitions and performance metrics for modulation formats that are common in the literature. Then, the chapter discusses optimization of modulation formats in coded systems. It distinguishes between three cases, depending on the type of decoder employed, which pose quite different requirements on the choice of modulation format. The three cases are soft-decision decoding, hard-decision decoding, and iterative decoding, which loosely correspond to weak, medium, and strong coding, respectively. The chapter also discusses the realizations of the transmitter and transmission link properties and the receiver algorithms, including DSP and decoding. It further explains how to simply determine the transmitted symbol from the received 4D vector, without resorting to a full search of the Euclidean distances to all points in the whole constellation

Mode division multiplexing in radio-over-free-space-optical system incorporating orthogonal frequency division multiplexing and photonic crystal fiber equalization

Radio over free space optics (Ro-FSO) is a revolutionary technology for seamlessly integrating radio and optical networks without expensive optical fiber cabling. RoFSO technology plays a crucial role in supporting broadband connectivity in rural and remote areas where current broadband infrastructure is not feasible due to geographical and economic inconvenience. Although the capacity of Ro-FSO can be increased by mode division multiplexing (MDM), the transmission distance and capacity is still limited by multipath fading and mode coupling losses due to atmospheric turbulences such as light fog, thin fog and heavy fog. The main intention of this thesis is to design MDM system for Ro-FSO for long and short haul communication. Orthogonal frequency division multiplexing (OFDM) is proposed for long haul communication to mitigate multipath fading and Photonic Crystal Fiber (PCF) is proposed for short haul communication to reduce mode coupling losses. The reported results of the proposed scheme for long haul communication show a significant 47% power improvement in deep fades from multipath propagation with the use of OFDM in MDM-Ro-FSO systems as compared to without OFDM. The results of the proposed scheme for short haul communication show 90.6% improvement in power in the dominant mode with the use of PCF in MDM-Ro-FSO as compared to without PCF. The reported results in the thesis show significant improvement in Ro-FSO systems as compared to previous systems in terms of capacity and transmission distance under clear weather conditions as well as under varying levels of fog. The contributions of this thesis are expected to provide seamless broadband services in remote areas

Analog radio over fiber solutions for multi-band 5g systems

This study presents radio over fiber (RoF) solutions for the fifth-generation (5G) of wireless networks. After the state of the art and a technical background review, four main contributions are reported. The first one is proposing and investigating a RoF technique based on a dual-drive Mach-Zehnder modulator (DD-MZM) for multi-band mobile fronthauls, in which two radiofrequency (RF) signals in the predicted 5G bands individually feed an arm of the optical modulator. Experimental results demonstrate the approach enhances the RF interference mitigation and can prevail over traditional methods. The second contribution comprises the integration of a 5G transceiver, previously developed by our group, in a passive optical network (PON) using RoF technology and wavelength division multiplexing (WDM) overlay. The proposed architecture innovates by employing DD-MZM and enables to simultaneously transport baseband and 5G candidate RF signals in the same PON infrastructure. The proof-of-concept includes the transmission of a generalized frequency division multiplexing (GFDM) signal generated by the 5G transceiver in the 700 MHz band, a 26 GHz digitally modulated signal as a millimeter-waves 5G band, and a baseband signal from an gigabit PON (GPON). Experimental results demonstrate the 5G transceiver digital performance when using RoF technology for distributing the GFDM signal, as well as Gbit/s throughput at 26 GHz. The third contribution is the implementation of a flexible-waveform and multi-application fiber-wireless (FiWi) system toward 5G. Such system includes the FiWi transmission of the GFDM and filtered orthogonal frequency division multiplexing (F-OFDM) signals at 788 MHz, toward long-range cells for remote or rural mobile access, as well as the recently launched 5G NR standard in microwave and mm-waves, aiming enhanced mobile broadband indoor and outdoor applications. Digital signal processing (DSP) is used for selecting the waveform and linearizing the RoF link. Experimental results demonstrate the suitability of the proposed solution to address 5G scenarios and requirements, besides the applicability of using existent fiber-to-the-home (FTTH) networks from Internet service providers for implementing 5G systems. Finally, the fourth contribution is the implementation of a multi-band 5G NR system with photonic-assisted RF amplification (PAA). The approach takes advantage of a novel PAA technique, based on RoF technology and four-wave mixing effect, that allows straightforward integration to the transport networks. Experimental results demonstrate iv uniform and stable 15 dB wideband gain for Long Term Evolution (LTE) and three 5G signals, distributed in the frequency range from 780 MHz to 26 GHz and coexisting in the mobile fronthaul. The obtained digital performance has efficiently met the Third-Generation Partnership Project (3GPP) requirements, demonstrating the applicability of the proposed approach for using fiber-optic links to distribute and jointly amplify LTE and 5G signals in the optical domain.Agência 1Este trabalho apresenta soluções de rádio sobre fibra (RoF) para aplicações em redes sem fio de quinta geração (5G), e inclui quatro contribuições principais. A primeira delas refere-se à proposta e investigação de uma técnica de RoF baseada no modulador eletroóptico de braço duplo, dual-drive Mach-Zehnder (DD-MZM), para a transmissão simultânea de sinais de radiofrequência (RF) em bandas previstas para redes 5G. Resultados experimentais demonstram que o uso do DD-MZM favorece a ausência de interferência entre os sinais de RF transmitidos. A segunda contribuição trata da integração de um transceptor de RF, desenvolvido para aplicações 5G e apto a prover a forma de onda conhecida como generalized frequency division multiplexing (GFDM), em uma rede óptica passiva (PON) ao utilizar RoF e multiplexação por divisão de comprimento de onda (WDM). A arquitetura proposta permite transportar, na mesma infraestrutura de rede, sinais em banda base e de radiofrequência nas faixas do espectro candidatas para 5G. A prova de conceito inclui a distribuição conjunta de três tipos de sinais: um sinal GFDM na banda de 700 MHz, proveniente do transceptor desenvolvido; um sinal digital na frequência de 26 GHz, assumindo a faixa de ondas milimétricas; sinais em banda base provenientes de uma PON dedicada ao serviço de Internet. Resultados experimentais demonstram o desempenho do transceptor de RF ao utilizar a referida arquitetura para distribuir sinais GFDM, além de taxas de transmissão de dados da ordem de Gbit/s na faixa de 26 GHz. A terceira contribuição corresponde à implementação de um sistema fibra/rádio potencial para redes 5G, operando inclusive com o padrão ―5G New Radio (5G NR)‖ nas faixas de micro-ondas e ondas milimétricas. Tal sistema é capaz de prover macro células na banda de 700 MHz para aplicações de longo alcance e/ou rurais, utilizando sinais GFDM ou filtered orthogonal frequency division multiplexing (F-OFDM), assim como femto células na banda de 26 GHz, destinada a altas taxas de transmissão de dados para comunicações de curto alcance. Resultados experimentais demonstram a aplicabilidade da solução proposta para redes 5G, além da viabilidade de utilizar redes ópticas pertencentes a provedores de Internet para favorecer sistemas de nova geração. Por fim, a quarta contribuição trata da implementação de um sistema 5G NR multibanda, assistido por amplificação de RF no domínio óptico. Esse sistema faz uso de um novo método de amplificação, baseado no efeito não linear da mistura de quatro ondas, que vi permite integração direta em redes de transporte envolvendo rádio sobre fibra. Resultados experimentais demonstram ganho de RF igual a 15 dB em uma ampla faixa de frequências (700 MHz até 26 GHz), atendendo simultaneamente tecnologias de quarta e quinta geração. O desempenho digital obtido atendeu aos requisitos estabelecidos pela 3GPP (Third-Generation Partnership Project), indicando a aplicabilidade da solução em questão para distribuir e conjuntamente amplificar sinais de RF em enlaces de fibra óptica

Programmable DSP-enabled multi-adaptive optical transceivers based on OFDM technology for software defined networks

The dynamic behavior of the traffic demand, due to the advent of technologies such as cloud services or Internet of Things (IoT), is increasing. In fact, heterogeneous connections with different characteristics (bandwidth or bit rate) are expected that coexist in the optical networks. In this respect, an evolution towards Elastic Optical Networks (EONs) has emerged as a cost-effective, flexible and dynamic solution, to face the new claims. The main idea is the efficient utilization of the optical spectrum by combining flexible transceivers, flexi-grid and flexible optical switching. Including the principles of Software Defined Network (SDN) paradigm further flexibility and adaptability can be achieved. The Sliceable Bandwidth Variable Transceiver (S-BVT), as a key element in EONs, provides flexibility and adaptability to the optical networks. It is able to dynamically tune the optical bandwidth or bit rate changing parameters such as the modulation format, bandwidth, among others, to find a trade-off between transmission reach and spectral efficiency, serving multiples destinations. The combination of programmable Digital Signal Processing (DSP) modules with advanced transmission techniques based on Orthogonal Frequency Division Multiplexing (OFDM) technology using Direct Detection (DD) or COherent (CO) detection are proposed to be implemented at the S-BVT making it suitable for elastic optical metro/regional networks. Furthermore, the envisioned migration from fixed-grid to flexi-grid, can benefit from the use of S-BVTs since they are able to generate or receive multiple channels and slicing the aggregated flow into multiples flows with different capacities and destinations. We propose the use of S-BVTs based on multi-band OFDM systems. In particular, we focus on the theoretical model of an advanced transmission technique based on OFDM technology with DD. Then we evaluate the system for a realistic optical metro network. In the context of flexi-grid optical metro/regional networks, as well as the sliceability of the channels, the reduction of channel width for low bit rate connections can be envisioned. It involves that the signal traverses several nodes with the corresponding filtering elements, causing a substantially decrease and distortion of the signal bandwidth. This phenomenon known as filter narrowing effect has been also studied in this thesis, by simulations and experimentally for an adaptive cost-effective OFDM system using DD and for a standard OOK system. Apart from adaptive, flexible and programmable transceivers, metro optical networks have to be equipped with flexible optical switching systems at the node level. In this respect, we propose the adoption of adaptive S-BVTs based on advanced transmission techniques using DD with Discrete MultiTone (DMT) modulation and adaptive capabilities in combination with Semiconductor Optical Amplier (SOA)-based switching nodes. SOAs can be conveniently used for optical switching in metro networks because of their low cost or low power consumption, among others relevant characteristics. The system has been experimentally analyzed with and without considering filtering elements. Thanks to the combination of adaptive DMT modulation and SOA-based switching nodes, impairments due to the fiber links and the filtering elements can be compensated. Finally, to enhance the tranmission distance and data rate, we propose the combination of multidimensional constellations implemented at the DSP modules of the S-BVT with CO detection and OFDM technology. Thus, the deployed infrastructure is more efficiently exploited since the quadrature and the polarization dimensions are used to transmit the signal. In particular, we focus on CO-OFDM systems using Dual Polarization Quadrature Phase Shift Keying (DPQPSK) constellation transmitting the signal over the time and the polarization dimensions in the optical domain.El comportamiento dinámico de la demanda de tráfico, debido a la llegada de tecnologías como los servicios en la nube o el Internet of Things (IoT), está aumentando. De hecho, se espera que coexistan en las redes ópticas conexiones heterogéneas con características diferentes, tales como ancho de banda o tasa de bits. Para hacer frente a estas demandas es crucial una evolución de las redes ópticas. En este sentido, las Elastic Optical Networks (EONs) emergen como una solución rentable, flexible y dinámica. La idea principal se basa en la utilización eficiente del espectro óptico mediante la combinación de transceptores flexibles, redes flexibles y conmutación óptica flexible. Una mayor flexibilidad y adaptabilidad se puede conseguir incluyendo los principios del paradigma conocido como Software Defined Network (SDN). La adopción de la arquitectura SDN implica la separación del plano de control y de datos, permitiendo la programabilidad dinámica de la red. Un elemento clave en las EONs es el Sliceable Bandwidth Variable Transceiver (SBVT), ya que provee de flexibilidad y adaptabilidad a las redes ópticas. El S-BVT es capaz de cambiar el ancho de banda o la tasa de bits medicando parámetros como el formato de modulación, el ancho de banda o la codificación de Forward Error Correction (FEC), entre otros, para encontrar un equilibrio entre el alcance de la transmisión y la eficiencia espectral, sirviendo múltiples destinos. La combinación de módulos programables de Digital Signal Processing (DSP) con técnicas de transmisión avanzadas, basadas en la tecnología Orthogonal Frequency Division Multiplexing (OFDM) con detección directa o detección coherente, se han propuesto para ser implementadas en el S-BVT, haciéndolo adecuado para su uso en redes ópticas elásticas metropolitanas y regionales. Además, la migración prevista de las redes fijas a las redes flexibles, con el fin de explotar la granularidad de 12:5 GHz, puede beneficiarse del uso de S-BVTs ya que son capaces de generar y recibir múltiples canales y dividir el flujo agregado en múltiples flujos con diferentes capacidades y destinos. A este respecto, proponemos el uso de S-BVTs basados en señales OFDM multi banda combinadas en el dominio eléctrico con el fin de limitar los recursos optoelectrónicas y relajar los requerimientos de los convertidores digitales analógicos y analógicos digitales. En particular, nos centramos en el modelo teórico de una técnica de transmisión avanzada basada en la tecnología OFDM con detección directa. A continuación, evaluamos el sistema para una red metropolitana óptica realista. En el contexto de redes metropolitanas y regionales flexibles, además de la capacidad de división de los canales, se puede prever una posible reducción del ancho de canal para las conexiones de baja tasa de bits. Esto implica que la señal atraviese varios nodos con los correspondientes elementos filtrantes causando un substancial decremento y distorsión del ancho de banda de la señal. Este fenómeno conocido como el efecto de estrechamiento de filtrado ha sido también estudiado en esta tesis, mediante simulaciones y de manera experimental para un sistema OFDM rentable y adaptativo usando detección directa y un sistema estándar On-Off Keying (OOK). El sistema OFDM de detección directa ha resultado ser un buen candidato para aumentar la flexibilidad y la robustez frente a las deficiencias de transmisión sin necesidad de compensar la dispersión. Aparte de los transceptores adaptables, flexibles y programables, las redes ópticas metropolitanas deben estar equipadas con sistemas de conmutación óptica flexible a nivel de nodo. En este sentido, proponemos la adopción de S-BVTs adaptativos basados en técnicas de transmisión avanzadas usando detección directa con modulación Discrete MultiTone (DMT) y capacidades adaptativas, adoptando nodos de conmutación basados en Semiconductor Optical Amplifier (SOA). Los SOAs pueden ser utilizados para la conmutación óptica en redes metropolitanas debido a su bajo coste o bajo consumo de energía, entre otras características relevantes. El sistema ha sido analizado experimentalmente considerando y sin considerar la presencia de elementos filtrantes. Gracias a la combinación de la modulación DMT adaptativa y los nodos de conmutación basados en SOA, las degradaciones debidas a los enlaces de fibra y a los elementos filtrantes se pueden compensar. Finalmente, para mejorar la distancia de transmisión y la tasa de datos, proponemos la combinación de constelaciones multidimensionales implementadas en los módulos DSP del S-BVT utilizando detectaron coherente y la tecnología OFDM. De hecho, los sistemas OFDM coherentes tienen un espacio de señal 4D (dos cuadraturas y dos polarizaciones), que puede ser utilizado con constelaciones multidimensionales, pudiendo éstas ser más eficientes que las convencionales Binary Phase-Shift Keying (BPSK) o Quadrature Phase-Shift Keying (QPSK). De este modo, la infraestructura desplegada se explota de manera más eficiente, ya que tanto la dimensión de cuadratura como de polarización se utilizan para transmitir la señal. Además, los sistemas OFDM coherentes pueden recuperar la amplitud y la fase de la señal en el receptor, mitigando los efectos de la fibra aumentando, de esta forma, la distancia de transmisión. El sistema OFDM coherente que utiliza el formato de constelación Dual Polarization Quadrature Phase Shift Keying (DPQPSK) y que transmite la señal a lo largo del tiempo ha demostrado ser una solución prometedora.El comportament dinàmic de la demanda de transit, a causa de l'arribada de tecnologies, com poden ser els serveis al núvol o l'Internet of Things (IoT), està creixent. De fet, s'espera que coexisteixin a les xarxes òptiques connexions heterogènies amb característiques diferents, tal com l'ample de banda o la taxa de bits. Per a fer front a aquestes demandes és crucial una revolució de les xarxes òptiques. En aquest sentit, les Elastic Optical Networks (EONs) emergeixen com una solució rendible, flexible i dinàmica. La idea principal es basa en la utilització eficient de l'espectre òptic mitjançant la combinació de transceptors flexibles, xarxes flexibles i commutació òptica flexible. Una major flexibilitat i adaptabilitat es pot aconseguir incloent els principis del paradigma conegut com a Software Defined Networks (SDN). L’adopció de l'arquitectura SDN implica la separació del plànol de control i de dades permetent la programabilitat de la xarxa d'una forma dinàmica. Un element clau en les EONs és l'Sliceable Bandwith Variable Transceiver (S-BVT), ja que aporta flexibilitat i adaptabilitat a les xarxes òptiques. L' S-BVT és capaç de canviar l'ample de banda o la taxa de bits modificant paràmetres com el format de modulació, l'ample de banda o la codificació del Forward Error Correction (FEC), entre altres, per a trobar un equilibri entre l’assistència assolida i l’eficiència espectral, servint múltiples destinacions. La combinació de mòduls de Digital Signal Processing (DSP) amb tècniques de transmissió avançades basades en la tecnologia Orthogonal Frequency Division Multiplexing (OFDM) i detecció directa o detecció coherent s'han proposat per a ser implementades en l'S-BVT, fent-lo adient per a les xarxes òptiques elàstiques metropolitanes i regionals. A més, la migració prevista des de les xarxes fixes a les xarxes flexibles, amb el fi d'explotar la granuralitat de 12:5GHz, pot beneficiar-se de l’ús d'S-BVTs ja que són capaços de generar i rebre múltiples canals i dividir el flux agregat en múltiples fluxos amb diferents capacitats i destinacions. Per aquest motiu, proposem l’ús d'S-BVTs basats en senyals OFDM multi banda combinats en el domini elèctric amb el fi de limitar els recursos optoelectrònics i relaxar els requeriments dels convertidors digitals analògics i analògics digitals. Particularment, ens centrem en el model teòric d'una tècnica de transmissió avançada basada en la tecnologia OFDM amb detecció directa. A continuació, avaluem el sistema per a una xarxa metropolitana òptica realista. En el context de xarxes metropolitanes i regionals flexibles, a més de la propietat de divisió dels canals, es pot preveure una possible reducció de l'ample de canal per a les connexions de baixa taxa de bits. Això implica que el senyal travessi diversos nodes amb els corresponents elements filtrants causant un substancial decrement i distorsió de l'ample de banda del senyal. Aquest fenomen conegut com l'efecte d'estretament de filtrat ha sigut també estudiat en aquesta tesi, mitjançant simulacions i de manera experimental en el cas d'un sistema OFDM rendible i adaptatiu utilitzant detecció directa i un sistema estàndard On-Off Keying (OOK). El sistema OFDM de detecció directa ha resultat ser un bon candidat per augmentar la flexibilitat i la robustesa front a les deficiències de transmissió sense necessitat de compensar la dispersió. A part dels transceptors adaptables, flexibles i programables, les xarxes òptiques metropolitanes han d'estar equipades amb sistemes de commutació òptica flexible a nivell de node. En aquest sentit, proposem l’adopció d'un S-BVT adaptatiu basat en tècniques de transmissió avançades i utilitzant detecció directa amb modulació Discrete MultiTone (DMT) i capacitats adaptatives, adoptant nodes de comunicació basats en Semi-conductor Optical Amplifier (SOA). Els SOAs poden ser utilitzats per la commutació _òptica en xarxes metropolitanes degut al seu baix cost o baix consum d'energia, entre altres característiques rellevants. El sistema ha sigut analitzat experimentalment considerant i sense considerar la presència d'elements filtrants. Gràcies a la combinació de la modulació DMT adaptativa i dels nodes de commutació basats en SOA, les degradacions degudes als enllaços de fibra i als elements filtrants es poden compensar. Finalment, per a millorar la distància de transmissió i la taxa de dades, proposem la combinació de constel·lacions multidimensionals implementades als mòduls DSP de l'SBVT utilitzant detecció coherent i la tecnologia OFDM. De fet, els sistemes coherents OFDM tenen un espai de senyal 4D (dues quadratures i dues polaritzacions), que pot ser utilitzat amb constel·lacions multidimensionals, arribant a ser més eficients que les modulacions convencionals Binary Phase-Shift Keying (BPSK) o Quadrature Phase-Shift Keying (QPSK). D'aquesta manera, la infraestructura desplegada s'explota de forma més eficient, ja que tant la dimensió de quadratura com de polarització s'utilitzen per transmetre el senyal. A més, els sistemes coherents basats en OFDM poden recuperar l'amplitud i la fase del senyal en el receptor, mitigant els efectes de la fibra i d'aquesta forma augmentant la distància de transmissió. El sistema OFDM coherent que utilitza el format de constel·lació Dual Polarization Quadrature Phase Shift Keying (DPQPSK) i que transmet el senyal al llarg del temps ha demostrat ser una solució prometedora.Postprint (published version

MIMO Systems

In recent years, it was realized that the MIMO communication systems seems to be inevitable in accelerated evolution of high data rates applications due to their potential to dramatically increase the spectral efficiency and simultaneously sending individual information to the corresponding users in wireless systems. This book, intends to provide highlights of the current research topics in the field of MIMO system, to offer a snapshot of the recent advances and major issues faced today by the researchers in the MIMO related areas. The book is written by specialists working in universities and research centers all over the world to cover the fundamental principles and main advanced topics on high data rates wireless communications systems over MIMO channels. Moreover, the book has the advantage of providing a collection of applications that are completely independent and self-contained; thus, the interested reader can choose any chapter and skip to another without losing continuity

Advanced constellation and demapper schemes for next generation digital terrestrial television broadcasting systems

206 p.Esta tesis presenta un nuevo tipo de constelaciones llamadas no uniformes. Estos esquemas presentan una eficacia de hasta 1,8 dB superior a las utilizadas en los últimos sistemas de comunicaciones de televisión digital terrestre y son extrapolables a cualquier otro sistema de comunicaciones (satélite, móvil, cable¿). Además, este trabajo contribuye al diseño de constelaciones con una nueva metodología que reduce el tiempo de optimización de días/horas (metodologías actuales) a horas/minutos con la misma eficiencia. Todas las constelaciones diseñadas se testean bajo una plataforma creada en esta tesis que simula el estándar de radiodifusión terrestre más avanzado hasta la fecha (ATSC 3.0) bajo condiciones reales de funcionamiento.Por otro lado, para disminuir la latencia de decodificación de estas constelaciones esta tesis propone dos técnicas de detección/demapeo. Una es para constelaciones no uniformes de dos dimensiones la cual disminuye hasta en un 99,7% la complejidad del demapeo sin empeorar el funcionamiento del sistema. La segunda técnica de detección se centra en las constelaciones no uniformes de una dimensión y presenta hasta un 87,5% de reducción de la complejidad del receptor sin pérdidas en el rendimiento.Por último, este trabajo expone un completo estado del arte sobre tipos de constelaciones, modelos de sistema, y diseño/demapeo de constelaciones. Este estudio es el primero realizado en este campo

Quantum Dash Multi-Wavelength Lasers for Next Generation High Capacity Multi-Gb/s Millimeter-Wave Radio-over-Fiber Wireless Communication Networks

The ever-increasing proliferation of mobile users and new technologies with different applications and features, and the demand for reliable high-speed high capacity, pervasive connectivity and low latency have initiated a roadmap for the next generation wireless networks, fifth generation (5G), which is set to revolutionize the existing wireless communications. 5G will use heterogeneous higher carrier frequencies from the plentifully available spectra in the higher microwave and millimeter-wave (MMW) bands, including licensed and unlicensed spectra, for achieving multi-Gb/s wireless connectivity and overcoming the existing wireless spectrum crunch in the sub-6 GHz bands, resulting from the tremendous growth of data-intensive technologies and applications. The use of MMW when complemented by multiple-input-multiple-output (MIMO) technology can significantly increase data capacity through spatial multiplexing, and improve coverage and system reliability through spatial diversity. However, high-frequency MMW signals are prone to extreme propagation path loss and are challenging to generate and process with conventional bandwidth-limiting electronics. In addition, the existing digitized fronthaul for centralized radio access network (C-RAN) architecture is considered inefficient for 5G and beyond. Thus, to fully exploit the promising MMW 5G new radio (NR) resource and to alleviate the electronics and fronthaul bottleneck, microwave photonics with analog radio-over-fiber (A-RoF) technology becomes instrumental for optically synthesizing and processing broadband RF MMW wireless signals over optical links. The generation and distribution of high-frequency MMW signals in the optical domain over A-RoF links facilitate the seamless integration of high-capacity, reliable and transparent optical networks with flexible, mobile and pervasive wireless networks, extending the reach and coverage of high-speed broadband MMW wireless communications. Consequently, this fiber-wireless integration not only overcomes the problem of high bandwidth requirements, transmission capacity and span limitation but also significantly reduces system complexity considering the deployment of ultra-dense small cells with large numbers of 5G remote radio units (RRUs) having massive MIMO antennas with beamforming capabilities connected to the baseband units (BBU) in a C-RAN environment through an optical fiber-based fronthaul network. Nevertheless, photonic generation of spectrally pure RF MMW signals either involves complex circuitry or suffers from frequency fluctuation and phase noise due to uncorrelated optical sources, which can degrade system performance. Thus simple highly integrated and cost-efficient low-noise optical sources are required for next-generation MMW RoF wireless transmission systems. More recently, well-designed quantum confined nanostructures such as semiconductor quantum dash/dot multi-wavelength lasers (QD-MWLs) have attracted more interest in the photonic generation of RF MMW signals due to their simple compact and integrated design with highly coherent and correlated optical signals having a very low phase and intensity noise attributed to the inherent properties of QD materials. The main theme of this thesis revolves around the experimental investigation of such nanostructures on the device and system level for applications in high-speed high-capacity broadband MMW RoF-based fronthaul and wireless access networks. Several photonic-aided high-capacity long-reach MMW RoF wireless transmission systems are proposed and experimentally demonstrated based on QD-MWLs with the remote distribution and photonic generation of broadband multi-Gb/s MMW wireless signals at 5G NR (FR2) in the K-band, Ka-band and V-band in simplex, full-duplex and MIMO configurations over 10 to 50 km optical fiber and subsequent wireless transmission and detection. The QD-MWLs-based photonic MMW RoF wireless transmission systems’ designs and experimental demonstrations could usher in a new era of ultra-high-speed broadband multi-Gb/s wireless communications at the MMW frequency bands for next-generation wireless networks. The QD-MWLs investigated in this thesis include a simple monolithically integrated and highly coherent low-noise single-section semiconductor InAs/InP QD buried heterostructure passively mode-locked (PML) laser-based optical coherent frequency comb (CFC) and a novel monolithic highly correlated low-noise semiconductor InAs/InP buried heterostructure common-cavity QD dual-wavelength distributed feedback laser (QD-DW-DFBL). The performance of each device is thoroughly characterized experimentally in terms of optical phase noise, relative intensity noise (RIN), timing jitter and RF phase noise exhibiting promising results. Based on these devices, different long-reach photonic MMW RoF wireless transmission systems, including simplex single-input-single-output (SISO) and multiple-input-multiple-output (MIMO) and bidirectional configurations, are proposed and experimentally demonstrated with real-time remote electrical RF synthesizer-free all-optical frequency up-conversion, wireless transmission and successful reception of wide-bandwidth multi-level quadrature amplitude modulated (M-QAM) RF MMW wireless signals having bit rates ranging from 4 Gb/s to 36 Gb/s over different hybrid fiber-wireless links comprising of standard single mode fiber (SSMF) and indoor wireless channel. The end-to-end links are thoroughly investigated in terms of error-vector-magnitude (EVM), bit-error-rat (BER), constellations and eye diagrams, realizing successful error-free transmission. Finally, novel high-capacity spectrally efficient MIMO and optical beamforming enabled photonic MMW RoF wireless transceivers design and methods based on QD-MWLs with wavelength division multiplexing (WDM) and space division multiplexing (SDM) are proposed and discussed. A proof-of-concept implementation of the proposed photonic MMW RoF wireless transmission system is also simulated in a simple WDM-based configuration with bidirectional 4×4 MIMO MMW carrier streams

Compensation of Laser Phase Noise Using DSP in Multichannel Fiber-Optic Communications

One of the main impairments that limit the throughput of fiber-optic communication systems is laser phase noise, where the phase of the laser output drifts with time. This impairment can be highly correlated across channels that share lasers in multichannel fiber-optic systems based on, e.g., wavelength-division multiplexing using frequency combs or space-division multiplexing. In this thesis, potential improvements in the system tolerance to laser phase noise that are obtained through the use of joint-channel digital signal processing are investigated. To accomplish this, a simple multichannel phase-noise model is proposed, in which the phase noise is arbitrarily correlated across the channels. Using this model, high-performance pilot-aided phase-noise compensation and data-detection algorithms are designed for multichannel fiber-optic systems using Bayesian-inference frameworks. Through Monte Carlo simulations of coded transmission in the presence of moderate laser phase noise, it is shown that joint-channel processing can yield close to a 1 dB improvement in power efficiency. It is further shown that the algorithms are highly dependent on the positions of pilots across time and channels. Hence, the problem of identifying effective pilot distributions is studied.The proposed phase-noise model and algorithms are validated using experimental data based on uncoded space-division multiplexed transmission through a weakly-coupled, homogeneous, single-mode, 3-core fiber. It is found that the performance improvements predicted by simulations based on the model are reasonably close to the experimental results. Moreover, joint-channel processing is found to increase the maximum tolerable transmission distance by up to 10% for practical pilot rates.Various phenomena decorrelate the laser phase noise between channels in multichannel transmission, reducing the potency of schemes that exploit this correlation. One such phenomenon is intercore skew, where the spatial channels experience different propagation velocities. The effect of intercore skew on the performance of joint-core phase-noise compensation is studied. Assuming that the channels are aligned in the receiver, joint-core processing is found to be beneficial in the presence of skew if the linewidth of the local oscillator is lower than the light-source laser linewidth.In the case that the laser phase noise is completely uncorrelated across channels in multichannel transmission, it is shown that the system performance can be improved by applying transmitter-side multidimensional signal rotations. This is found by numerically optimizing rotations of four-dimensional signals that are transmitted through two channels. Structured four-dimensional rotations based on Hadamard matrices are found to be near-optimal. Moreover, in the case of high signal-to-noise ratios and high signal dimensionalities, Hadamard-based rotations are found to increase the achievable information rate by up to 0.25 bits per complex symbol for transmission of higher-order modulations