1,831 research outputs found

    Integrating Vegetation Indices Models and Phenological Classification with Composite SAR and Optical Data for Cereal Yield Estimation in Finland (Part I)

    Get PDF
    Special Issue Microwave Remote Sensing.Abstract: During 1996–2006 the Ministry of Agriculture and Forestry in Finland, MTT Agrifood Research Finland and the Finnish Geodetic Institute carried out a joint remote sensing satellite research project. It evaluated the applicability of composite multispectral SAR and optical satellite data for cereal yield estimations in the annual crop inventory program. Three Vegetation Indices models (VGI, Infrared polynomial, NDVI and Composite multispetral SAR and NDVI) were validated to estimate cereal yield levels using solely optical and SAR satellite data (Composite Minimum Dataset). The average R2 for cereal yield (yb) was 0.627. The averaged composite SAR modeled grain yield level was 3,750 kg/ha (RMSE = 10.3%, 387 kg/ha) for high latitude spring cereals (4,018 kg/ha for spring wheat, 4,037 kg/ha for barley and 3,151 kg/ha for oats). Keywords: Composite multispectral modeling; SAR; classification; SatPhenClass algorithm; minimum dataset; cereal yield; phenology; LAI-bridge; CAP; IACS; FLPISPeer reviewe

    Offshore oil spill detection using synthetic aperture radar

    Get PDF
    Among the different types of marine pollution, oil spill has been considered as a major threat to the sea ecosystems. The source of the oil pollution can be located on the mainland or directly at sea. The sources of oil pollution at sea are discharges coming from ships, offshore platforms or natural seepage from sea bed. Oil pollution from sea-based sources can be accidental or deliberate. Different sensors to detect and monitor oil spills could be onboard vessels, aircraft, or satellites. Vessels equipped with specialised radars, can detect oil at sea but they can cover a very limited area. One of the established ways to monitor sea-based oil pollution is the use of satellites equipped with Synthetic Aperture Radar (SAR).The aim of the work presented in this thesis is to identify optimum set of feature extracted parameters and implement methods at various stages for oil spill detection from Synthetic Aperture Radar (SAR) imagery. More than 200 images of ERS-2, ENVSAT and RADARSAT 2 SAR sensor have been used to assess proposed feature vector for oil spill detection methodology, which involves three stages: segmentation for dark spot detection, feature extraction and classification of feature vector. Unfortunately oil spill is not only the phenomenon that can create a dark spot in SAR imagery. There are several others meteorological and oceanographic and wind induced phenomena which may lead to a dark spot in SAR imagery. Therefore, these dark objects also appear similar to the dark spot due to oil spill and are called as look-alikes. These look-alikes thus cause difficulty in detecting oil spill spots as their primary characteristic similar to oil spill spots. To get over this difficulty, feature extraction becomes important; a stage which may involve selection of appropriate feature extraction parameters. The main objective of this dissertation is to identify the optimum feature vector in order to segregate oil spill and ‘look-alike’ spots. A total of 44 Feature extracted parameters have been studied. For segmentation, four methods; based on edge detection, adaptive theresholding, artificial neural network (ANN) segmentation and the other on contrast split segmentation have been implemented. Spot features are extracted from both the dark spots themselves and their surroundings. Classification stage was performed using two different classification techniques, first one is based on ANN and the other based on a two-stage processing that combines classification tree analysis and fuzzy logic. A modified feature vector, including both new and improved features, is suggested for better description of different types of dark spots. An ANN classifier using full spectrum of feature parameters has also been developed and evaluated. The implemented methodology appears promising in detecting dark spots and discriminating oil spills from look-alikes and processing time is well below any operational service requirements

    Intelligent Computations for Flood Monitoring

    Get PDF
    Floods represent the most devastating natural hazards in the world, affecting more people and causing more property damage than any other natural phenomena. One of the important problems associated with flood monitoring is flood extent extraction from satellite imagery, since it is impractical to acquire the flood area through field observations. This paper presents a method to flood extent extraction from synthetic-aperture radar (SAR) images that is based on intelligent computations. In particular, we apply artificial neural networks, self-organizing Kohonen’s maps (SOMs), for SAR image segmentation and classification. We tested our approach to process data from three different satellite sensors: ERS-2/SAR (during flooding on Tisza river, Ukraine and Hungary, 2001), ENVISAT/ASAR WSM (Wide Swath Mode) and RADARSAT-1 (during flooding on Huaihe river, China, 2007). Obtained results showed the efficiency of our approach

    Crop biophysical parameter retrieval from Sentinel-1 SAR data with a multi-target inversion of Water Cloud Model

    Get PDF
    Estimation of bio-and geophysical parameters from Earth observation (EO) data is essential for developing applications on crop growth monitoring. High spatio-temporal resolution and wide spatial coverage provided by EO satellite data are key inputs for operational crop monitoring. In Synthetic Aperture Radar (SAR) applications, a semi-empirical model (viz., Water Cloud Model (WCM)) is often used to estimate vegetation descriptors individually. However, a simultaneous estimation of these vegetation descriptors would be logical given their inherent correlation, which is seldom preserved in the estimation of individual descriptors by separate inversion models. This functional relationship between biophysical parameters is essential for crop yield models, given that their variations often follow different distribution throughout crop development stages. However, estimating individual parameters with independent inversion models presume a simple relationship (potentially linear) between the biophysical parameters. Alternatively, a multi-target inversion approach would be more effective for this aspect of model inversion compared to an individual estimation approach. In the present research, the multi-output support vector regression (MSVR) technique is used for inversion of the WCM from C-band dual-pol Sentinel-1 SAR data. Plant Area Index (PAI, m2 m−2) and wet biomass (W, kg m−2) are used as the vegetation descriptors in the WCM. The performance of the inversion approach is evaluated with in-situ measurements collected over the test site in Manitoba (Canada), which is a super-site in the Joint Experiment for Crop Assessment and Monitoring (JECAM) SAR inter-comparison experiment network. The validation results indicate a good correlation with acceptable error estimates (normalized root mean square error–nRMSE and mean absolute error–MAE) for both PAI and wet biomass for the MSVR approach and a better estimation with MSVR than single-target models (support vector regression–SVR). Furthermore, the correlation between PAI and wet biomass is assessed using the MSVR and SVR model. Contrary to the single output SVR, the correlation between biophysical parameters is adequately taken into account in MSVR based simultaneous inversion technique. Finally, the spatio-temporal maps for PAI and W at different growth stages indicate their variability with crop development over the test site.This research was supported in part by Shastri Indo-Candian Institute, New Delhi, India and the Spanish Ministry of Economy, Industry and Competitiveness, in part by the State Agency of Research (AEI), in part by the European Funds for Regional Development under project TEC2017-85244-C2-1-P

    Integration of LIDAR and IFSAR for mapping

    Get PDF
    LiDAR and IfSAR data is now widely used for a number of applications, particularly those needing a digital elevation model. The data is often complementary to other data such as aerial imagery and high resolution satellite data. This paper will review the current data sources and the products and then look at the ways in which the data can be integrated for particular applications. The main platforms for LiDAR are either helicopter or fixed wing aircraft, often operating at low altitudes, a digital camera is frequently included on the platform, there is an interest in using other sensors such as 3 line cameras of hyperspectral scanners. IfSAR is used from satellite platforms, or from aircraft, the latter are more compatible with LiDAR for integration. The paper will examine the advantages and disadvantages of LiDAR and IfSAR for DEM generation and discuss the issues which still need to be dealt with. Examples of applications will be given and particularly those involving the integration of different types of data. Examples will be given from various sources and future trends examined

    Application Of Polarimetric SAR For Surface Parameter Inversion And Land Cover Mapping Over Agricultural Areas

    Get PDF
    In this thesis, novel methodology is developed to extract surface parameters under vegetation cover and to map crop types, from the polarimetric Synthetic Aperture Radar (PolSAR) images over agricultural areas. The extracted surface parameters provide crucial information for monitoring crop growth, nutrient release efficiency, water capacity, and crop production. To estimate surface parameters, it is essential to remove the volume scattering caused by the crop canopy, which makes developing an efficient volume scattering model very critical. In this thesis, a simplified adaptive volume scattering model (SAVSM) is developed to describe the vegetation scattering as crop changes over time through considering the probability density function of the crop orientation. The SAVSM achieved the best performance in fields of wheat, soybean and corn at various growth stages being in convert with the crop phenological development compared with current models that are mostly suitable for forest canopy. To remove the volume scattering component, in this thesis, an adaptive two-component model-based decomposition (ATCD) was developed, in which the surface scattering is a X-Bragg scattering, whereas the volume scattering is the SAVSM. The volumetric soil moisture derived from the ATCD is more consistent with the verifiable ground conditions compared with other model-based decomposition methods with its RMSE improved significantly decreasing from 19 [vol.%] to 7 [vol.%]. However, the estimation by the ATCD is biased when the measured soil moisture is greater than 30 [vol.%]. To overcome this issue, in this thesis, an integrated surface parameter inversion scheme (ISPIS) is proposed, in which a calibrated Integral Equation Model together with the SAVSM is employed. The derived soil moisture and surface roughness are more consistent with verifiable observations with the overall RMSE of 6.12 [vol.%] and 0.48, respectively

    Integrating Incidence Angle Dependencies Into the Clustering-Based Segmentation of SAR Images

    Get PDF
    Synthetic aperture radar systems perform signal acquisition under varying incidence angles and register an implicit intensity decay from near to far range. Owing to the geometrical interaction between microwaves and the imaged targets, the rates at which intensities decay depend on the nature of the targets, thus rendering single-rate image correction approaches only partially successful. The decay, also known as the incidence angle effect, impacts the segmentation of wide-swath images performed on absolute intensity values. We propose to integrate the target-specific intensity decay rates into a nonstationary statistical model, for use in a fully automatic and unsupervised segmentation algorithm. We demonstrate this concept by assuming Gaussian distributed log-intensities and linear decay rates, a fitting approximation for the smooth systematic decay observed for extended flat targets. The segmentation is performed on Sentinel-1, Radarsat-2, and UAVSAR wide-swath scenes containing open water, sea ice, and oil slicks. As a result, we obtain segments connected throughout the entire incidence angle range, thus overcoming the limitations of modeling that does not account for different per-target decays. The model simplicity also allows for short execution times and presents the segmentation approach as a potential operational algorithm. In addition, we estimate the log-linear decay rates and examine their potential for a physical interpretation of the segments

    A Neural Network Approach to Flood Mapping Using Satellite Imagery

    Get PDF
    This paper presents a new approach to flood mapping using satellite synthetic-aperture radar (SAR) images that is based on intelligent techniques. In particular, we apply artificial neural networks, self-organizing Kohonen's maps (SOMs), for SAR image segmentation and classification. Our approach was used to process data from different satellite SAR instruments (ERS-2/SAR, ENVISAT/ASAR, RADARSAT-1) for different flood events: the Tisza river, Ukraine and Hungary, 2001; the Huaihe river, China, 2007; the Mekong river, Thailand and Laos, 2008; and the Koshi river, India and Nepal, 2008

    Automated wetland delineation from multi-frequency and muliti-polarized SAR Images in high temporal and spatial resolution

    Get PDF
    Water scarcity is one of the main challenges posed by the changing climate. Especially in semi-arid regions where water reservoirs are filled during the very short rainy season, but have to store enough water for the extremely long dry season, the intelligent handling of water resources is vital. This study focusses on Lac Bam in Burkina Faso, which is the largest natural lake of the country and of high importance for the local inhabitants for irrigated farming, animal watering, and extraction of water for drinking and sanitation. With respect to the competition for water resources an independent area-wide monitoring system is essential for the acceptance of any decision maker. The following contribution introduces a weather and illumination independent monitoring system for the automated wetland delineation with a high temporal (about two weeks) and a high spatial sampling (about five meters). The similarities of the multispectral and multi-polarized SAR acquisitions by RADARSAT-2 and TerraSAR-X are studied as well as the differences. The results indicate that even basic approaches without pre-classification time series analysis or post-classification filtering are already enough to establish a monitoring system of prime importance for a whole region
    • …
    corecore