Nanoscale Heat Transfer from Magnetic Nanoparticles and Ferritin in an Alternating Magnetic Field

Recent suggestions of nanoscale heat confinement on the surface of synthetic and biogenic magnetic nanoparticles during heating by radio frequency-alternating magnetic fields have generated intense interest because of the potential utility of this phenomenon for noninvasive control of biomolecular and cellular function. However, such confinement would represent a significant departure from the classical heat transfer theory. Here, we report an experimental investigation of nanoscale heat confinement on the surface of several types of iron oxide nanoparticles commonly used in biological research, using an all-optical method devoid of the potential artifacts present in previous studies. By simultaneously measuring the fluorescence of distinct thermochromic dyes attached to the particle surface or dissolved in the surrounding fluid during radio frequency magnetic stimulation, we found no measurable difference between the nanoparticle surface temperature and that of the surrounding fluid for three distinct nanoparticle types. Furthermore, the metalloprotein ferritin produced no temperature increase on the protein surface nor in the surrounding fluid. Experiments mimicking the designs of previous studies revealed potential sources of the artifacts. These findings inform the use of magnetic nanoparticle hyperthermia in engineered cellular and molecular systems

Pcm telemtry- a new approach using all- magnetic techniques

Digital all-magnetic circuit technique used in pulse code modulation telemetry system

Multiple Output Power Supply using Toroidal Transformers for Medium Voltage Active Gate Drivers

When operating in high power applications, power devices dissipate tens or hundreds of watts of power in the form of heat. The ability of the power devices to withstand power and dissipation of heat across the power devices becomes a prominent requirement in designing the power converter. This challenge demands a power converter design to be more effective and consistent which factors in size, cost, weight, power density and reliability. This study aims to propose a gate driver isolated power supply design that can be used in medium voltage applications (e.g., up to 10 kV) while respecting the principle of scalability. A versatile design that facilitates addition of another power switch to the converter if needed, without having to alter too many power supply components while retaining the main structure, thus reducing system complexity and size. The proposed topology is a full-bridge converter with a single-turn primary side transformer, realized using a high voltage insulated hook-up wire as primary winding, while the secondary winding is wound around a toroidal core. This structure can supply several gate drivers simultaneously without replicating the primary side converter, but by simply adding a toroidal core with the secondary side converter which effectively reduces the size of the power supply. To satisfy magnetic and electric constraints, the proposed toroidal transformer needs to exhibit a very low primary to secondary coupling capacitance to avoid high common mode current, which leads to control signal distortion. For this, a multi-objective optimization design has been performed for the magnetic components of the topology. In this paper, a single input and three output power supply design is proposed for a 10 kV active gate driver

MODELING AND TESTING OF ETHERNET TRANSFORMERS

Twisted-pair Ethernet is now the standard home and office last-mile network technology. For decades, the IEEE standard that defines Ethernet has required electrical isolation between the twisted pair cable and the Ethernet device. So, for decades, every Ethernet interface has used magnetic core Ethernet transformers to isolate Ethernet devices and keep users safe in the event of a potentially dangerous fault on the network media. The current state-of-the-art Ethernet transformers are miniature (<5mm diameter) ferrite-core toroids wrapped with approximately 10 to 30 turns of wire. As small as current Ethernet transformers are, they still limit further Ethernet device miniaturization and require a separate bulky package or jack housing. New coupler designs must be explored which are capable of exceptional miniaturization or on-chip fabrication. This dissertation thoroughly explores the performance of the current commercial Ethernet transformers to both increase understanding of the device's behavior and outline performance parameters for replacement devices. Lumped element and distributed circuit models are derived; testing schemes are developed and used to extract model parameters from commercial Ethernet devices. Transfer relation measurements of the commercial Ethernet transformers are compared against the model's behavior and it is found that the tuned, distributed models produce the best transfer relation match to the measured data. Process descriptions and testing results on fabricated thin-film dielectric-core toroid transformers are presented. The best results were found for a 32-turn transformer loaded with 100&#937;, the impedance of twisted pair cable. This transformer gave a flat response from about 10MHz to 40MHz with a height of approximately 0.45. For the fabricated transformer structures, theoretical methods to determine resistance, capacitance and inductance are presented. A special analytical and numerical analysis of the fabricated transformer inductance is presented. Planar cuts of magnetic slope fields around the dielectric-core toroid are shown that describe the effect of core height and winding density on flux uniformity without a magnetic core

Multiple Output Power Supply using Toroidal Transformers for Medium Voltage Active Gate Drivers

When operating in high power applications, power devices dissipate tens or hundreds of watts of power in the form of heat. The ability of the power devices to withstand power and dissipation of heat across the power devices becomes a prominent requirement in designing the power converter. This challenge demands a power converter design to be more effective and consistent which factors in size, cost, weight, power density and reliability. This study aims to propose a gate driver isolated power supply design that can be used in medium voltage applications (e.g., up to 10 kV) while respecting the principle of scalability. A versatile design that facilitates addition of another power switch to the converter if needed, without having to alter too many power supply components while retaining the main structure, thus reducing system complexity and size. The proposed topology is a full-bridge converter with a single-turn primary side transformer, realized using a high voltage insulated hook-up wire as primary winding, while the secondary winding is wound around a toroidal core. This structure can supply several gate drivers simultaneously without replicating the primary side converter, but by simply adding a toroidal core with the secondary side converter which effectively reduces the size of the power supply. To satisfy magnetic and electric constraints, the proposed toroidal transformer needs to exhibit a very low primary to secondary coupling capacitance to avoid high common mode current, which leads to control signal distortion. For this, a multi-objective optimization design has been performed for the magnetic components of the topology. In this paper, a single input and three output power supply design is proposed for a 10 kV active gate driver

Performance optimization aspects of common mode chokes

Optimization aspects of common mode chokes are presented. These are based on a behavioral model for common mode chokes and its sensitivity study. Results are used to show the influence of the designable parameters on the final performance of the choke placed in a circuit

Simple system for locating ground loops

A simple low-cost system for rapid identification of the cables causing ground loops in complex instrumentation configurations is described. The system consists of an exciter module that generates a 100 kHz ground loop current and a detector module that determines which cable conducts this test current. Both the exciter and detector are magnetically coupled to the ground circuit so there is no physical contact to the instrumentation system under test

Aspects of magnetic pulse compression and pulse sharpening

Imperial Users onl

Electrophoretic deposition of ferrite

The ability to integrate a material with a high permeability on chip, allows for magnetically coupled circuits and structures to be designed and incorporated along side CMOS circuitry. Devices ranging from A.C. transformers to magnetically driven MEMS structures can be designed and fabricated. Desirable characteristics of magnetic cores for integrated inductors and transformers are first high saturation flux in order to obtain high saturation current; high permeability to obtain high inductance; high resistivity to reduce eddy current loss at high frequencies and compatible deposition and patterning processes. High frequency magnetic materials are oxide based ceramics and are therefore difficult to evaporate, sputter, plate and selectively etched. ElectroPhoretic Deposition (EPD) is a method where insulating particles are imparted charge in a suspension and are made to deposit on an electrode by applying electric field. EPD has been extensively employed in depositing oxide based phosphors for display applications. In this study, ferrite particles have been prepared by grinding sintered toroids and deposited by EPD. The electrophoretic solution bath is composed of isopropyl alcohol with traces of Mg(N03)2 and La(N03)3 salts. Glycerol is added to the solution bath as a surfactant to promote increased substrate adhesion. The dissociation of magnesium nitrate in the solution bath charges the ferrite particles. An electric field of ~ 50-160 V/cm is applied with negative terminal connected to the wafer to be plated and aluminum electrode is used as the anode. The deposition process is found to be self limiting with the initial high elerophoretic current declining to 10% of its value in 10 minutes. The deposition rate and zeta potential measurements indicate a high particle velocity on the order 5.7x10-3 cm/s with an electric field of 160V/cm generated across the 2 cm electrode spacing. Pattern filling and conformal coverage in copper damascene planar microinductors has been investigated. A method to extracted permeability from S11 impedance analysis has been employed. It has been found that grinding process deteriorates magnetic response. With recent advances in magnetic particle technology for high frequency materials, these results enable unique hard and soft powder ferrite material to be selectively deposited in wide variety of CMOS and MEM’s based applications