A 128-point Multi-Path SC FFT Architecture

This paper presents a new radix-2^k multi-path FFT architecture, named MSC FFT, which is based on a single-path radix-2 serial commutator (SC) FFT architecture. The proposed multi-path architecture has a very high hardware utilization that results in a small chip area, while providing high throughput. In addition, the adoption of radix-2^k FFT algorithms allows for simplifying the rotators even further. It is achieved by optimizing the structure of the processing element (PE). The implemented architecture is a 128-point 4-parallel multi-path SC FFT using 90 nm process. Its area and power consumption at 250 MHz are only 0.167 mm2 and 14.81 mW, respectively. Compared with existing works, the proposed design reduces significantly the chip rea and the power consumption, while providing high throughput.Comment: Conference paper, ISCAS 2020, 5 page

Low-power Programmable Processor for Fast Fourier Transform Based on Transport Triggered Architecture

This paper describes a low-power processor tailored for fast Fourier transform computations where transport triggering template is exploited. The processor is software-programmable while retaining an energy-efficiency comparable to existing fixed-function implementations. The power savings are achieved by compressing the computation kernel into one instruction word. The word is stored in an instruction loop buffer, which is more power-efficient than regular instruction memory storage. The processor supports all power-of-two FFT sizes from 64 to 16384 and given 1 mJ of energy, it can compute 20916 transforms of size 1024.Comment: 5 pages, 4 figures, 1 table, ICASSP 2019 conferenc

Architectural implementation of cordic unit and its applications

The ubiquity of DSP has made increasing demand to develop area efficient and accurate architectures in carrying out many nonlinear arithmetic operations. One such architecture is CORDIC unit which has many applications in the field of DSP including implementing transforms based on Fourier basis. This report presents architecture of CORDIC, embedded with a scaling unit that has only minimal number of adders and shifters. It can be implemented in rotation mode as well as vectoring mode. The purpose of the design is to get a scaling free CORDIC unit preserving the design of original algorithm. The proposed design has a considerable reduction in hardware when compared with other scaling free architectures. The analysis of error for different word lengths and different input ranges for fixed word length gives a better choice to choose the parameters. The error in rotation mode for 16 bit data path, obtained for Y equivalent input is 0.073% and for X equivalent input is 0.067%. We also report architecture of a DFT core that is implemented using low latency CORDIC. A scaling unit has been included to get scaled outputs. The reported DFT core architecture has 22 adders in total, in addition to 2 CORDIC units. DDS or NCO are nowadays prominently used in the applications of RF signal processing, satellite communications, etc. This report also brings out the FPGA implementation of one such DDS which has quadrature outputs. The proposed DDS design, which is based on pipelined CORDIC, has considerable improvement in terms of SFDR compared to other existing designs at reduced hardware. This report also proposes multiplier-less architecture for the implementation of radix-2^2 folded pipelined complex FFT core based on CORDIC technique. The number of points considered in the work is sixteen and the folding is done by a factor of four

Real-time digital signal processing for new wavelength-to-the-user optical access networks

Nowadays, optical access networks provide high capacity to end users with growing availability of multimedia contents that can be streamed to fixed or mobile devices. In this regard, one of the most flexible and low-cost approaches is Passive Optical Network (PON) that is used in Fiber-to-the-Home (FTTH). Due to the growing of the bandwidth demands, Wavelength Division Multiplexing (WDM), and later on ultra-dense WDM (udWDM) PON, with a narrow channel spacing, to increase the number of users through a single fiber, has been deployed. The udWDM-PON with coherent technology is an attractive solution for the next generation optical access networks with advanced digital signal processing (DSP). Thanks to the higher sensitivity and improved channel selectivity in coherent detection with efficient DSP, optical networks support larger number of users in longer distances. Since the cost is the main concern in the optical access networks, this thesis presents DSP architectures in coherent receiver (Rx), based on low-cost direct phase modulated commercial DFB lasers. The proposals are completely in agreement with consept of wavelength-to-the-user, where each client in optical network is dedicated to an individual wavelength. Next, in a 6.25 GHz spaced udWDM grid with the optimized DSP techniques and phase-shift-keying (PSK) modulation format, the high sensitivity is achieved in real-time field-programmable-gate-array (FPGA) implementations. Moreover, this thesis reduces hardware complexity of optical carrier recovery (CR) with two various strategies. First, based on differential mth-power frequency estimator (FE) by using look-up-tables (LUTs) and second, LUT-free CR architecture, with optimizing the power consumption and hardware resources, as well as improving the channel selectivity in terms of speed and robustness. Furthermore, by designing very simple but efficient clock recovery, a symbol-rate DSP architecture, which process data using only one sample per symbol (1-sps), for polarization diversity (POD) structure, becomes possible. It makes the DSP independent from state-of-polarization (SOP), even in the case of low-cost optical front-end and low-speed analog-to-digital converters (ADCs), keeps the performance high as well as sensitivity in real-time implementations on FPGA.Avui en dia, les xarxes d'accés òptic proporcionen una alta capacitat als usuaris finals amb una creixent disponibilitat de continguts multimèdia que es poden transmetre a dispositius fixos o mòbils. En aquest sentit, un dels enfocaments més flexibles i de baix cost és la Xarxa Òptica Passiva (PON) que s'utilitza a Fibra-fins-la-Llar (FTTH). A causa del creixent requeriment de l'ample de banda, s'ha desplegat la multiplexació de divisió d'ona (WDM) i, posteriorment, el PON amb WDM d'alta densitat (udWDM), amb un espaiat estret de canals, per augmentar el nombre d'usuaris a través d'una sola fibra. L'udWDM-PON amb tecnologia coherent és una solució atractiva per a les xarxes d'accés òptic d'última generació amb processament avançat de senyal digital (DSP). Gràcies a la major sensibilitat i a la selectivitat millorada del canal en la detecció coherent amb DSP eficient, les xarxes òptiques suporten un nombre més gran d'usuaris a distàncies més llargues. Atès que el cost és la principal preocupació en les xarxes d'accés òptic, aquesta tesi presenta arquitectures DSP en receptor coherent (Rx), basades en làsers DFB comercials modulats en fase directa de baix cost. Les propostes estan d'acord amb la asignació de la longitud d'ona a l'usuari, on a cada client de la xarxa òptica se li dedica a una longitud d'ona individual. A continuació, en una graella udWDM espaciada de 6,25 GHz amb les tècniques de DSP optimitzades i el format de modulació de fase (PSK), s'aconsegueix l'alta sensibilitat en implementacions field-programable-gate-array (FPGA) en temps real. A més, aquesta tesi redueix la complexitat del maquinari de recuperació òptica de portadors (CR) amb dues estratègies diverses. Primer, basat en un estimador de freqüència de potència diferencial (FE) mitjançant l'ús de taules de cerca (LUTs) i, en segon lloc, l'arquitectura CR sense LUT, amb l'optimització del consum d'energia i els recursos de maquinari, a més de millorar la selectivitat del canal en termes de velocitat i robustesa. A més, al dissenyar una recuperació de rellotge molt simple, però eficaç, es fa possible una arquitectura DSP a la velocitat dels símbols, que processa dades utilitzant només una mostra per símbol (1-sps) per a l'estructura de la diversitat de polarització òptica (POD). Fa que el DSP sigui independent de l'estat de polarització (SOP), fins i tot en el cas dels analog-to-digital converters (ADC) de front-end òptics de baix cost, i manté el rendiment alt i la sensibilitat en les implementacions en temps real de FPGA.Postprint (published version

Real-time digital signal processing for new wavelength-to-the-user optical access networks

Nowadays, optical access networks provide high capacity to end users with growing availability of multimedia contents that can be streamed to fixed or mobile devices. In this regard, one of the most flexible and low-cost approaches is Passive Optical Network (PON) that is used in Fiber-to-the-Home (FTTH). Due to the growing of the bandwidth demands, Wavelength Division Multiplexing (WDM), and later on ultra-dense WDM (udWDM) PON, with a narrow channel spacing, to increase the number of users through a single fiber, has been deployed. The udWDM-PON with coherent technology is an attractive solution for the next generation optical access networks with advanced digital signal processing (DSP). Thanks to the higher sensitivity and improved channel selectivity in coherent detection with efficient DSP, optical networks support larger number of users in longer distances. Since the cost is the main concern in the optical access networks, this thesis presents DSP architectures in coherent receiver (Rx), based on low-cost direct phase modulated commercial DFB lasers. The proposals are completely in agreement with consept of wavelength-to-the-user, where each client in optical network is dedicated to an individual wavelength. Next, in a 6.25 GHz spaced udWDM grid with the optimized DSP techniques and phase-shift-keying (PSK) modulation format, the high sensitivity is achieved in real-time field-programmable-gate-array (FPGA) implementations. Moreover, this thesis reduces hardware complexity of optical carrier recovery (CR) with two various strategies. First, based on differential mth-power frequency estimator (FE) by using look-up-tables (LUTs) and second, LUT-free CR architecture, with optimizing the power consumption and hardware resources, as well as improving the channel selectivity in terms of speed and robustness. Furthermore, by designing very simple but efficient clock recovery, a symbol-rate DSP architecture, which process data using only one sample per symbol (1-sps), for polarization diversity (POD) structure, becomes possible. It makes the DSP independent from state-of-polarization (SOP), even in the case of low-cost optical front-end and low-speed analog-to-digital converters (ADCs), keeps the performance high as well as sensitivity in real-time implementations on FPGA.Avui en dia, les xarxes d'accés òptic proporcionen una alta capacitat als usuaris finals amb una creixent disponibilitat de continguts multimèdia que es poden transmetre a dispositius fixos o mòbils. En aquest sentit, un dels enfocaments més flexibles i de baix cost és la Xarxa Òptica Passiva (PON) que s'utilitza a Fibra-fins-la-Llar (FTTH). A causa del creixent requeriment de l'ample de banda, s'ha desplegat la multiplexació de divisió d'ona (WDM) i, posteriorment, el PON amb WDM d'alta densitat (udWDM), amb un espaiat estret de canals, per augmentar el nombre d'usuaris a través d'una sola fibra. L'udWDM-PON amb tecnologia coherent és una solució atractiva per a les xarxes d'accés òptic d'última generació amb processament avançat de senyal digital (DSP). Gràcies a la major sensibilitat i a la selectivitat millorada del canal en la detecció coherent amb DSP eficient, les xarxes òptiques suporten un nombre més gran d'usuaris a distàncies més llargues. Atès que el cost és la principal preocupació en les xarxes d'accés òptic, aquesta tesi presenta arquitectures DSP en receptor coherent (Rx), basades en làsers DFB comercials modulats en fase directa de baix cost. Les propostes estan d'acord amb la asignació de la longitud d'ona a l'usuari, on a cada client de la xarxa òptica se li dedica a una longitud d'ona individual. A continuació, en una graella udWDM espaciada de 6,25 GHz amb les tècniques de DSP optimitzades i el format de modulació de fase (PSK), s'aconsegueix l'alta sensibilitat en implementacions field-programable-gate-array (FPGA) en temps real. A més, aquesta tesi redueix la complexitat del maquinari de recuperació òptica de portadors (CR) amb dues estratègies diverses. Primer, basat en un estimador de freqüència de potència diferencial (FE) mitjançant l'ús de taules de cerca (LUTs) i, en segon lloc, l'arquitectura CR sense LUT, amb l'optimització del consum d'energia i els recursos de maquinari, a més de millorar la selectivitat del canal en termes de velocitat i robustesa. A més, al dissenyar una recuperació de rellotge molt simple, però eficaç, es fa possible una arquitectura DSP a la velocitat dels símbols, que processa dades utilitzant només una mostra per símbol (1-sps) per a l'estructura de la diversitat de polarització òptica (POD). Fa que el DSP sigui independent de l'estat de polarització (SOP), fins i tot en el cas dels analog-to-digital converters (ADC) de front-end òptics de baix cost, i manté el rendiment alt i la sensibilitat en les implementacions en temps real de FPGA

Baseband Processing for 5G and Beyond: Algorithms, VLSI Architectures, and Co-design

In recent years the number of connected devices and the demand for high data-rates have been significantly increased. This enormous growth is more pronounced by the introduction of the Internet of things (IoT) in which several devices are interconnected to exchange data for various applications like smart homes and smart cities. Moreover, new applications such as eHealth, autonomous vehicles, and connected ambulances set new demands on the reliability, latency, and data-rate of wireless communication systems, pushing forward technology developments. Massive multiple-input multiple-output (MIMO) is a technology, which is employed in the 5G standard, offering the benefits to fulfill these requirements. In massive MIMO systems, base station (BS) is equipped with a very large number of antennas, serving several users equipments (UEs) simultaneously in the same time and frequency resource. The high spatial multiplexing in massive MIMO systems, improves the data rate, energy and spectral efficiencies as well as the link reliability of wireless communication systems. The link reliability can be further improved by employing channel coding technique. Spatially coupled serially concatenated codes (SC-SCCs) are promising channel coding schemes, which can meet the high-reliability demands of wireless communication systems beyond 5G (B5G). Given the close-to-capacity error correction performance and the potential to implement a high-throughput decoder, this class of code can be a good candidate for wireless systems B5G. In order to achieve the above-mentioned advantages, sophisticated algorithms are required, which impose challenges on the baseband signal processing. In case of massive MIMO systems, the processing is much more computationally intensive and the size of required memory to store channel data is increased significantly compared to conventional MIMO systems, which are due to the large size of the channel state information (CSI) matrix. In addition to the high computational complexity, meeting latency requirements is also crucial. Similarly, the decoding-performance gain of SC-SCCs also do come at the expense of increased implementation complexity. Moreover, selecting the proper choice of design parameters, decoding algorithm, and architecture will be challenging, since spatial coupling provides new degrees of freedom in code design, and therefore the design space becomes huge. The focus of this thesis is to perform co-optimization in different design levels to address the aforementioned challenges/requirements. To this end, we employ system-level characteristics to develop efficient algorithms and architectures for the following functional blocks of digital baseband processing. First, we present a fast Fourier transform (FFT), an inverse FFT (IFFT), and corresponding reordering scheme, which can significantly reduce the latency of orthogonal frequency-division multiplexing (OFDM) demodulation and modulation as well as the size of reordering memory. The corresponding VLSI architectures along with the application specific integrated circuit (ASIC) implementation results in a 28 nm CMOS technology are introduced. In case of a 2048-point FFT/IFFT, the proposed design leads to 42% reduction in the latency and size of reordering memory. Second, we propose a low-complexity massive MIMO detection scheme. The key idea is to exploit channel sparsity to reduce the size of CSI matrix and eventually perform linear detection followed by a non-linear post-processing in angular domain using the compressed CSI matrix. The VLSI architecture for a massive MIMO with 128 BS antennas and 16 UEs along with the synthesis results in a 28 nm technology are presented. As a result, the proposed scheme reduces the complexity and required memory by 35%–73% compared to traditional detectors while it has better detection performance. Finally, we perform a comprehensive design space exploration for the SC-SCCs to investigate the effect of different design parameters on decoding performance, latency, complexity, and hardware cost. Then, we develop different decoding algorithms for the SC-SCCs and discuss the associated decoding performance and complexity. Also, several high-level VLSI architectures along with the corresponding synthesis results in a 12 nm process are presented, and various design tradeoffs are provided for these decoding schemes

Architecture and algorithms for the implementation of digital wireless receivers in FPGA and ASIC: ISDB-T and DVB-S2 cases

[EN] The first generation of Terrestrial Digital Television(DTV) has been in service for over a decade. In 2013, several countries have already completed the transition from Analog to Digital TV Broadcasting, most of which in Europe. In South America, after several studies and trials, Brazil adopted the Japanese standard with some innovations. Japan and Brazil started Digital Terrestrial Television Broadcasting (DTTB) services in December 2003 and December 2007 respectively, using Integrated Services Digital Broadcasting - Terrestrial (ISDB-T), also known as ARIB STD-B31. In June 2005 the Committee for the Information Technology Area (CATI) of Brazilian Ministry of Science and Technology and Innovation MCTI approved the incorporation of the IC-Brazil Program, in the National Program for Microelectronics (PNM) . The main goals of IC-Brazil are the formal qualification of IC designers, support to the creation of semiconductors companies focused on projects of ICs within Brazil, and the attraction of semiconductors companies focused on the design and development of ICs in Brazil. The work presented in this thesis originated from the unique momentum created by the combination of the birth of Digital Television in Brazil and the creation of the IC-Brazil Program by the Brazilian government. Without this combination it would not have been possible to make these kind of projects in Brazil. These projects have been a long and costly journey, albeit scientifically and technologically worthy, towards a Brazilian DTV state-of-the-art low complexity Integrated Circuit, with good economy scale perspectives, due to the fact that at the beginning of this project ISDB-T standard was not adopted by several countries like DVB-T. During the development of the ISDB-T receiver proposed in this thesis, it was realized that due to the continental dimensions of Brazil, the DTTB would not be enough to cover the entire country with open DTV signal, specially for the case of remote localizations far from the high urban density regions. Then, Eldorado Research Institute and Idea! Electronic Systems, foresaw that, in a near future, there would be an open distribution system for high definition DTV over satellite, in Brazil. Based on that, it was decided by Eldorado Research Institute, that would be necessary to create a new ASIC for broadcast satellite reception. At that time DVB-S2 standard was the strongest candidate for that, and this assumption still stands nowadays. Therefore, it was decided to apply to a new round of resources funding from the MCTI - that was granted - in order to start the new project. This thesis discusses in details the Architecture and Algorithms proposed for the implementation of a low complexity Intermediate Frequency(IF) ISDB-T Receiver on Application Specific Integrated Circuit (ASIC) CMOS. The Architecture proposed here is highly based on the COordinate Rotation Digital Computer (CORDIC) Algorithm, that is a simple and efficient algorithm suitable for VLSI implementations. The receiver copes with the impairments inherent to wireless channels transmission and the receiver crystals. The thesis also discusses the Methodology adopted and presents the implementation results. The receiver performance is presented and compared to those obtained by means of simulations. Furthermore, the thesis also presents the Architecture and Algorithms for a DVB-S2 receiver targeting its ASIC implementation. However, unlike the ISDB-T receiver, only preliminary ASIC implementation results are introduced. This was mainly done in order to have an early estimation of die area to prove that the project in ASIC is economically viable, as well as to verify possible bugs in early stage. As in the case of ISDB-T receiver, this receiver is highly based on CORDIC algorithm and it was prototyped in FPGA. The Methodology used for the second receiver is derived from that used for the ISDB-T receiver, with minor additions given the project characteristics.[ES] La primera generación de Televisión Digital Terrestre(DTV) ha estado en servicio por más de una década. En 2013, varios países completaron la transición de transmisión analógica a televisión digital, la mayoría de ellas en Europa. En América del Sur, después de varios estudios y ensayos, Brasil adoptó el estándar japonés con algunas innovaciones. Japón y Brasil comenzaron a prestar el servicio de Difusión de Televisión Digital Terrestre (DTTB) en diciembre de 2003 y diciembre de 2007 respectivamente, utilizando Radiodifusión Digital de Servicios Integrados Terrestres (ISDB-T), también conocida como ARIB STD-B31. En junio de 2005, el Comité del Área de Tecnología de la Información (CATI) del Ministerio de Ciencia, Tecnología e Innovación de Brasil - MCTI aprobó la incorporación del Programa CI-Brasil, en el Programa Nacional de Microelectrónica (PNM). Los principales objetivos de la CI-Brasil son la formación de diseñadores de CIs, apoyar la creación de empresas de semiconductores enfocadas en proyectos de circuitos integrados dentro de Brasil, y la atracción de empresas de semiconductores interesadas en el diseño y desarrollo de circuitos integrados. El trabajo presentado en esta tesis se originó en el impulso único creado por la combinación del nacimiento de la televisión digital en Brasil y la creación del Programa de CI-Brasil por el gobierno brasileño. Sin esta combinación no hubiera sido posible realizar este tipo de proyectos en Brasil. Estos proyectos han sido un trayecto largo y costoso, aunque meritorio desde el punto de vista científico y tecnológico, hacia un Circuito Integrado brasileño de punta y de baja complejidad para DTV, con buenas perspectivas de economía de escala debido al hecho que al inicio de este proyecto, el estándar ISDB-T no fue adoptado por varios países como DVB-T. Durante el desarrollo del receptor ISDB-T propuesto en esta tesis, se observó que debido a las dimensiones continentales de Brasil, la DTTB no sería suficiente para cubrir todo el país con la señal de televisión digital abierta, especialmente para el caso de localizaciones remotas, apartadas de las regiones de alta densidad urbana. En ese momento, el Instituto de Investigación Eldorado e Idea! Sistemas Electrónicos, previeron que en un futuro cercano habría un sistema de distribución abierto para DTV de alta definición por satélite en Brasil. Con base en eso, el Instituto de Investigación Eldorado decidió que sería necesario crear un nuevo ASIC para la recepción de radiodifusión por satélite, basada el estándar DVB-S2. En esta tesis se analiza en detalle la Arquitectura y algoritmos propuestos para la implementación de un receptor ISDB-T de baja complejidad y frecuencia intermedia (IF) en un Circuito Integrado de Aplicación Específica (ASIC) CMOS. La arquitectura aquí propuesta se basa fuertemente en el algoritmo Computadora Digital para Rotación de Coordenadas (CORDIC), el cual es un algoritmo simple, eficiente y adecuado para implementaciones VLSI. El receptor hace frente a las deficiencias inherentes a las transmisiones por canales inalámbricos y los cristales del receptor. La tesis también analiza la metodología adoptada y presenta los resultados de la implementación. Por otro lado, la tesis también presenta la arquitectura y los algoritmos para un receptor DVB-S2 dirigido a la implementación en ASIC. Sin embargo, a diferencia del receptor ISDB-T, se introducen sólo los resultados preliminares de implementación en ASIC. Esto se hizo principalmente con el fin de tener una estimación temprana del área del die para demostrar que el proyecto en ASIC es económicamente viable, así como para verificar posibles errores en etapa temprana. Como en el caso de receptor ISDB-T, este receptor se basa fuertemente en el algoritmo CORDIC y fue un prototipado en FPGA. La metodología utilizada para el segundo receptor se deriva de la utilizada para el re[CA] La primera generació de Televisió Digital Terrestre (TDT) ha estat en servici durant més d'una dècada. En 2013, diversos països ja van completar la transició de la radiodifusió de televisió analògica a la digital, i la majoria van ser a Europa. A Amèrica del Sud, després de diversos estudis i assajos, Brasil va adoptar l'estàndard japonés amb algunes innovacions. Japó i Brasil van començar els servicis de Radiodifusió de Televisió Terrestre Digital (DTTB) al desembre de 2003 i al desembre de 2007, respectivament, utilitzant la Radiodifusió Digital amb Servicis Integrats de (ISDB-T), coneguda com a ARIB STD-B31. Al juny de 2005, el Comité de l'Àrea de Tecnologia de la Informació (CATI) del Ministeri de Ciència i Tecnologia i Innovació del Brasil (MCTI) va aprovar la incorporació del programa CI Brasil al Programa Nacional de Microelectrònica (PNM). Els principals objectius de CI Brasil són la qualificació formal dels dissenyadors de circuits integrats, el suport a la creació d'empreses de semiconductors centrades en projectes de circuits integrats dins del Brasil i l'atracció d'empreses de semiconductors centrades en el disseny i desenvolupament de circuits integrats. El treball presentat en esta tesi es va originar en l'impuls únic creat per la combinació del naixement de la televisió digital al Brasil i la creació del programa Brasil CI pel govern brasiler. Sense esta combinació no hauria estat possible realitzar este tipus de projectes a Brasil. Estos projectes han suposat un viatge llarg i costós, tot i que digne científicament i tecnològica, cap a un circuit integrat punter de baixa complexitat per a la TDT brasilera, amb bones perspectives d'economia d'escala perquè a l'inici d'este projecte l'estàndard ISDB-T no va ser adoptat per diversos països, com el DVB-T. Durant el desenvolupament del receptor de ISDB-T proposat en esta tesi, va resultar que, a causa de les dimensions continentals de Brasil, la DTTB no seria suficient per cobrir tot el país amb el senyal de TDT oberta, especialment pel que fa a les localitzacions remotes allunyades de les regions d'alta densitat urbana.. En este moment, l'Institut de Recerca Eldorado i Idea! Sistemes Electrònics van preveure que, en un futur pròxim, no hi hauria a Brasil un sistema de distribució oberta de TDT d'alta definició a través de satèl¿lit. D'acord amb això, l'Institut de Recerca Eldorado va decidir que seria necessari crear un nou ASIC per a la recepció de radiodifusió per satèl¿lit. basat en l'estàndard DVB-S2. En esta tesi s'analitza en detall l'arquitectura i els algorismes proposats per l'execució d'un receptor ISDB-T de Freqüència Intermèdia (FI) de baixa complexitat sobre CMOS de Circuit Integrat d'Aplicacions Específiques (ASIC). L'arquitectura ací proposada es basa molt en l'algorisme de l'Ordinador Digital de Rotació de Coordenades (CORDIC), que és un algorisme simple i eficient adequat per implementacions VLSI. El receptor fa front a les deficiències inherents a la transmissió de canals sense fil i els cristalls del receptor. Esta tesi també analitza la metodologia adoptada i presenta els resultats de l'execució. Es presenta el rendiment del receptor i es compara amb els obtinguts per mitjà de simulacions. D'altra banda, esta tesi també presenta l'arquitectura i els algorismes d'un receptor de DVB-S2 de cara a la seua implementació en ASIC. No obstant això, a diferència del receptor ISDB-T, només s'introdueixen resultats preliminars d'implementació en ASIC. Això es va fer principalment amb la finalitat de tenir una estimació primerenca de la zona de dau per demostrar que el projecte en ASIC és econòmicament viable, així com per verificar possibles errors en l'etapa primerenca. Com en el cas del receptor ISDB-T, este receptor es basa molt en l'algorisme CORDIC i va ser un prototip de FPGA. La metodologia utilitzada per al segon receptor es deriva de la utilitzada per al receptor IRodrigues De Lima, E. (2016). Architecture and algorithms for the implementation of digital wireless receivers in FPGA and ASIC: ISDB-T and DVB-S2 cases [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/61967TESI

Tecnologias coerentes para redes ópticas flexíveis

Next-generation networks enable a broad range of innovative services with the best delivery by utilizing very dense wired/wireless networks. However, the development of future networks will require several breakthroughs in optical networks such as high-performance optical transceivers to support a very-high capacity optical network as well as optimization of the network concept, ensuring a dramatic reduction of the cost per bit. At the same time, all of the optical network segments (metro, access, long-haul) need new technology options to support high capacity, spectral efficiency and data-rate flexibility. Coherent detection offers an opportunity by providing very high sensitivity and supporting high spectral efficiency. Coherent technology can still be combined with polarization multiplexing. Despite the increased cost and complexity, the migration to dual-polarization coherent transceivers must be considered, as it enables to double the spectral efficiency. These dual-polarization systems require an additional digital signal processing (DSP) subsystem for polarization demultiplexing. This work seeks to provide and characterize cost-effective novel coherent transceivers for the development of new generation practical, flexible and high capacity transceivers for optical metro-access and data center interconnects. In this regard, different polarization demultiplexing (PolDemux) algorithms, as well as adaptive Stokes will be considered. Furthermore, low complexity and modulation format-agnostic DSP techniques based on adaptive Stokes PolDemux for flexible and customizable optical coherent systems will be proposed. On this subject, the performance of the adaptive Stokes algorithm in an ultra-dense wavelength division multiplexing (U-DWDM) system will be experimentally evaluated, in offline and real-time operations over a hybrid optical-wireless link. In addition, the efficiency of this PolDemux algorithm in a flexible optical metro link based on Nyquist pulse shaping U-DWDM system and hybrid optical signals will be assessed. Moreover, it is of great importance to find a transmission technology that enables to apply the Stokes PolDemux for long-haul transmission systems and data center interconnects. In this work, it is also proposed a solution based on the use of digital multi-subcarrier multiplexing, which improve the performance of long-haul optical systems, without increasing substantially, their complexity and cost.As redes de telecomunicações futuras permitirão uma ampla gama de serviços inovadores e com melhor desempenho. No entanto, o desenvolvimento das futuras redes implicará vários avanços nas redes de fibra ótica, como transcetores óticos de alto desempenho capazes de suportar ligações de muito elevada capacidade, e a otimização da estrutura da rede, permitindo uma redução drástica do custo por bit transportado. Simultaneamente, todos os segmentos de rede ótica (metropolitanas, acesso e longo alcance) necessitam de novas opções tecnológicas para suportar uma maior capacidade, maior eficiência espetral e flexibilidade. Neste contexto, a deteção coerente surge como uma oportunidade, fornecendo alta sensibilidade e elevada eficiência espetral. A tecnologia de deteção coerente pode ainda ser associada à multiplexação na polarização. Apesar de um potencial aumento ao nível do custo e da complexidade, a migração para transcetores coerentes de dupla polarização deve ser ponderada, pois permite duplicar a eficiência espetral. Esses sistemas de dupla polarização requerem um subsistema de processamento digital de sinal (DSP) adicional para desmultiplexagem da polarização. Este trabalho procura fornecer e caracterizar novos transcetores coerentes de baixo custo para o desenvolvimento de uma nova geração de transcetores mais práticos, flexíveis e de elevada capacidade, para interconexões óticas ao nível das futuras redes de acesso e metro. Assim, serão analisados diferentes algoritmos para a desmultiplexagem da polarização, incluindo uma abordagem adaptativa baseada no espaço de Stokes. Além disso, são propostas técnicas de DSP independentes do formato de modulação e de baixa complexidade baseadas na desmultiplexagem de Stokes adaptativa para sistemas óticos coerentes flexíveis. Neste contexto, o desempenho do algoritmo adaptativo de desmultiplexagem na polarização baseado no espaço de Stokes é avaliado experimentalmente num sistema U-DWDM, tanto em análises off-line como em tempo real, considerando um percurso ótico hibrido que combina um sistema de transmissão suportado por fibra e outro em espaço livre. Foi ainda analisada a eficiência do algoritmo de desmultiplexagem na polarização numa rede ótica de acesso flexível U-DWDM com formatação de pulso do tipo Nyquist. Neste trabalho foi ainda analisada a aplicação da técnica de desmultiplexagem na polarização baseada no espaço de Stokes para sistemas de longo alcance. Assim, foi proposta uma solução de aplicação baseada no uso da multiplexagem digital de múltiplas sub-portadoras, tendo-se demonstrado uma melhoria na eficiência do desempenho dos sistemas óticos de longo alcance, sem aumentar significativamente a respetiva complexidade e custo.Programa Doutoral em Engenharia Eletrotécnic

Feedforward FFT Hardware Architectures Based on Rotator Allocation

In this paper, we present new feedforward FFT hardware architectures based on rotator allocation. The rotator allocation approach consists in distributing the rotations of the FFT in such a way that the number of edges in the FFT that need rotators and the complexity of the rotators are reduced. Radix-2 and radix-2(k) feedforward architectures based on rotator allocation are presented in this paper. Experimental results show that the proposed architectures reduce the hardware cost significantly with respect to previous FFT architectures.Funding Agencies|Swedish ELLIIT Program</p

Advanced DSP Techniques for High-Capacity and Energy-Efficient Optical Fiber Communications

The rapid proliferation of the Internet has been driving communication networks closer and closer to their limits, while available bandwidth is disappearing due to an ever-increasing network load. Over the past decade, optical fiber communication technology has increased per fiber data rate from 10 Tb/s to exceeding 10 Pb/s. The major explosion came after the maturity of coherent detection and advanced digital signal processing (DSP). DSP has played a critical role in accommodating channel impairments mitigation, enabling advanced modulation formats for spectral efficiency transmission and realizing flexible bandwidth. This book aims to explore novel, advanced DSP techniques to enable multi-Tb/s/channel optical transmission to address pressing bandwidth and power-efficiency demands. It provides state-of-the-art advances and future perspectives of DSP as well