Survey on Recent Advances in Integrated GNSSs Towards Seamless Navigation Using Multi-Sensor Fusion Technology

During the past few decades, the presence of global navigation satellite systems (GNSSs) such as GPS, GLONASS, Beidou and Galileo has facilitated positioning, navigation and timing (PNT) for various outdoor applications. With the rapid increase in the number of orbiting satellites per GNSS, enhancements in the satellite-based augmentation systems (SBASs) such as EGNOS and WAAS, as well as commissioning new GNSS constellations, the PNT capabilities are maximized to reach new frontiers. Additionally, the recent developments in precise point positioning (PPP) and real time kinematic (RTK) algorithms have provided more feasibility to carrier-phase precision positioning solutions up to the third-dimensional localization. With the rapid growth of internet of things (IoT) applications, seamless navigation becomes very crucial for numerous PNT dependent applications especially in sensitive fields such as safety and industrial applications. Throughout the years, GNSSs have maintained sufficiently acceptable performance in PNT, in RTK and PPP applications however GNSS experienced major challenges in some complicated signal environments. In many scenarios, GNSS signal suffers deterioration due to multipath fading and attenuation in densely obscured environments that comprise stout obstructions. Recently, there has been a growing demand e.g. in the autonomous-things domain in adopting reliable systems that accurately estimate position, velocity and time (PVT) observables. Such demand in many applications also facilitates the retrieval of information about the six degrees of freedom (6-DOF - x, y, z, roll, pitch, and heading) movements of the target anchors. Numerous modern applications are regarded as beneficiaries of precise PNT solutions such as the unmanned aerial vehicles (UAV), the automatic guided vehicles (AGV) and the intelligent transportation system (ITS). Hence, multi-sensor fusion technology has become very vital in seamless navigation systems owing to its complementary capabilities to GNSSs. Fusion-based positioning in multi-sensor technology comprises the use of multiple sensors measurements for further refinement in addition to the primary GNSS, which results in high precision and less erroneous localization. Inertial navigation systems (INSs) and their inertial measurement units (IMUs) are the most commonly used technologies for augmenting GNSS in multi-sensor integrated systems. In this article, we survey the most recent literature on multi-sensor GNSS technology for seamless navigation. We provide an overall perspective for the advantages, the challenges and the recent developments of the fusion-based GNSS navigation realm as well as analyze the gap between scientific advances and commercial offerings. INS/GNSS and IMU/GNSS systems have proven to be very reliable in GNSS-denied environments where satellite signal degradation is at its peak, that is why both integrated systems are very abundant in the relevant literature. In addition, the light detection and ranging (LiDAR) systems are widely adopted in the literature for its capability to provide 6-DOF to mobile vehicles and autonomous robots. LiDARs are very accurate systems however they are not suitable for low-cost positioning due to the expensive initial costs. Moreover, several other techniques from the radio frequency (RF) spectrum are utilized as multi-sensor systems such as cellular networks, WiFi, ultra-wideband (UWB) and Bluetooth. The cellular-based systems are very suitable for outdoor navigation applications while WiFi-based, UWB-based and Bluetooth-based systems are efficient in indoor positioning systems (IPS). However, to achieve reliable PVT estimations in multi-sensor GNSS navigation, optimal algorithms should be developed to mitigate the estimation errors resulting from non-line-of-sight (NLOS) GNSS situations. Examples of the most commonly used algorithms for trilateration-based positioning are Kalman filters, weighted least square (WLS), particle filters (PF) and many other hybrid algorithms by mixing one or more algorithms together. In this paper, the reviewed articles under study and comparison are presented by highlighting their motivation, the methodology of implementation, the modelling utilized and the performed experiments. Then they are assessed with respect to the published results focusing on achieved accuracy, robustness and overall implementation cost-benefits as performance metrics. Our summarizing survey assesses the most promising, highly ranked and recent articles that comprise insights into the future of GNSS technology with multi-sensor fusion technique.©2021 The Authors. Published by ION.fi=vertaisarvioimaton|en=nonPeerReviewed

AN INFORMATION THEORETIC APPROACH TO INTERACTING MULTIPLE MODEL ESTIMATION FOR AUTONOMOUS UNDERWATER VEHICLES

Accurate and robust autonomous underwater navigation (AUV) requires the fundamental task of position estimation in a variety of conditions. Additionally, the U.S. Navy would prefer to have systems that are not dependent on external beacon systems such as global positioning system (GPS), since they are subject to jamming and spoofing and can reduce operational effectiveness. Current methodologies such as Terrain-Aided Navigation (TAN) use exteroceptive imaging sensors for building a local reference position estimate and will not be useful when those sensors are out of range. What is needed are multiple navigation filters where each can be more effective depending on the mission conditions. This thesis investigates how to combine multiple navigation filters to provide a more robust AUV position estimate. The solution presented is to blend two different filtering methodologies utilizing an interacting multiple model (IMM) estimation approach based on an information theoretic framework. The first filter is a model-based Extended Kalman Filter (EKF) that is effective under dead reckoning (DR) conditions. The second is a Particle Filter approach for Active Terrain Aided Navigation (ATAN) that is appropriate when in sensor range. Using data collected at Lake Crescent, Washington, each of the navigation filters are developed with results and then we demonstrate how an IMM information theoretic approach can be used to blend approaches to improve position and orientation estimation.Lieutenant, United States NavyApproved for public release. Distribution is unlimited

Homography-Based State Estimation for Autonomous Exploration in Unknown Environments

This thesis presents the development of vision-based state estimation algorithms to enable a quadcopter UAV to navigate and explore a previously unknown GPS denied environment. These state estimation algorithms are based on tracked Speeded-Up Robust Features (SURF) points and the homography relationship that relates the camera motion to the locations of tracked planar feature points in the image plane. An extended Kalman filter implementation is developed to perform sensor fusion using measurements from an onboard inertial measurement unit (accelerometers and rate gyros) with vision-based measurements derived from the homography relationship. Therefore, the measurement update in the filter requires the processing of images from a monocular camera to detect and track planar feature points followed by the computation of homography parameters. The state estimation algorithms are designed to be independent of GPS since GPS can be unreliable or unavailable in many operational environments of interest such as urban environments. The state estimation algorithms are implemented using simulated data from a quadcopter UAV and then tested using post processed video and IMU data from flights of an autonomous quadcopter. The homography-based state estimation algorithm was effective, but accumulates drift errors over time due to the relativistic homography measurement of position

D-SLATS: Distributed Simultaneous Localization and Time Synchronization

Through the last decade, we have witnessed a surge of Internet of Things (IoT) devices, and with that a greater need to choreograph their actions across both time and space. Although these two problems, namely time synchronization and localization, share many aspects in common, they are traditionally treated separately or combined on centralized approaches that results in an ineffcient use of resources, or in solutions that are not scalable in terms of the number of IoT devices. Therefore, we propose D-SLATS, a framework comprised of three different and independent algorithms to jointly solve time synchronization and localization problems in a distributed fashion. The First two algorithms are based mainly on the distributed Extended Kalman Filter (EKF) whereas the third one uses optimization techniques. No fusion center is required, and the devices only communicate with their neighbors. The proposed methods are evaluated on custom Ultra-Wideband communication Testbed and a quadrotor, representing a network of both static and mobile nodes. Our algorithms achieve up to three microseconds time synchronization accuracy and 30 cm localization error

Kernel-based fault diagnosis of inertial sensors using analytical redundancy

Kernel methods are able to exploit high-dimensional spaces for representational advantage, while only operating implicitly in such spaces, thus incurring none of the computational cost of doing so. They appear to have the potential to advance the state of the art in control and signal processing applications and are increasingly seeing adoption across these domains. Applications of kernel methods to fault detection and isolation (FDI) have been reported, but few in aerospace research, though they offer a promising way to perform or enhance fault detection. It is mostly in process monitoring, in the chemical processing industry for example, that these techniques have found broader application. This research work explores the use of kernel-based solutions in model-based fault diagnosis for aerospace systems. Specifically, it investigates the application of these techniques to the detection and isolation of IMU/INS sensor faults – a canonical open problem in the aerospace field. Kernel PCA, a kernelised non-linear extension of the well-known principal component analysis (PCA) algorithm, is implemented to tackle IMU fault monitoring. An isolation scheme is extrapolated based on the strong duality known to exist between probably the most widely practiced method of FDI in the aerospace domain – the parity space technique – and linear principal component analysis. The algorithm, termed partial kernel PCA, benefits from the isolation properties of the parity space method as well as the non-linear approximation ability of kernel PCA. Further, a number of unscented non-linear filters for FDI are implemented, equipped with data-driven transition models based on Gaussian processes - a non-parametric Bayesian kernel method. A distributed estimation architecture is proposed, which besides fault diagnosis can contemporaneously perform sensor fusion. It also allows for decoupling faulty sensors from the navigation solution

Multiple IMU Sensor Fusion for SUAS Navigation and Photogrammetry

Inertial measurement units (IMUs) are devices that sense accelerations and angular rates in 3D so that vehicles and other devices can estimate their orientations, positions, and velocities. While traditionally large, heavy, and costly, using mechanical gyroscopes and stabilized platforms, the recent development of micro-electromechanical sensor (MEMS) IMUs that are small, light, and inexpensive has led to their adoption in many everyday systems such as cell phones, video game controllers, and commercial drones. MEMS IMUs, despite their advantages, have major drawbacks when it comes to accuracy and reliability. The idea of using more than one of these sensors in an array, instead of using only one, and fusing their outputs to generate an improved solution is explored in this thesis

Integrated WiFi/PDR/Smartphone using an unscented Kalman filter algorithm for 3D indoor localization

Because of the high calculation cost and poor performance of a traditional planar map when dealing with complicated indoor geographic information, a WiFi fingerprint indoor positioning system cannot be widely employed on a smartphone platform. By making full use of the hardware sensors embedded in the smartphone, this study proposes an integrated approach to a three-dimensional (3D) indoor positioning system. First, an improved K-means clustering method is adopted to reduce the fingerprint database retrieval time and enhance positioning efficiency. Next, with the mobile phone’s acceleration sensor, a new step counting method based on auto-correlation analysis is proposed to achieve cell phone inertial navigation positioning. Furthermore, the integration of WiFi positioning with Pedestrian Dead Reckoning (PDR) obtains higher positional accuracy with the help of the Unscented Kalman Filter algorithm. Finally, a hybrid 3D positioning system based on Unity 3D, which can carry out real-time positioning for targets in 3D scenes, is designed for the fluent operation of mobile terminals

An intelligent navigation system for an unmanned surface vehicle

Merged with duplicate record 10026.1/2768 on 27.03.2017 by CS (TIS)A multi-disciplinary research project has been carried out at the University of Plymouth to design and develop an Unmanned Surface Vehicle (USV) named ýpringer. The work presented herein relates to formulation of a robust, reliable, accurate and adaptable navigation system to enable opringei to undertake various environmental monitoring tasks. Synergistically, sensor mathematical modelling, fuzzy logic, Multi-Sensor Data Fusion (MSDF), Multi-Model Adaptive Estimation (MMAE), fault adaptive data acquisition and an user interface system are combined to enhance the robustness and fault tolerance of the onboard navigation system. This thesis not only provides a holistic framework but also a concourse of computational techniques in the design of a fault tolerant navigation system. One of the principle novelties of this research is the use of various fuzzy logic based MSDF algorithms to provide an adaptive heading angle under various fault situations for Springer. This algorithm adapts the process noise covariance matrix ( Q) and measurement noise covariance matrix (R) in order to address one of the disadvantages of Kalman filtering. This algorithm has been implemented in Spi-inger in real time and results demonstrate excellent robustness qualities. In addition to the fuzzy logic based MSDF, a unique MMAE algorithm has been proposed in order to provide an alternative approach to enhance the fault tolerance of the heading angles for Springer. To the author's knowledge, the work presented in this thesis suggests a novel way forward in the development of autonomous navigation system design and, therefore, it is considered that the work constitutes a contribution to knowledge in this area of study. Also, there are a number of ways in which the work presented in this thesis can be extended to many other challenging domains.DEVONPORT MANAGEMENT LTD, J&S MARINE LTD AND SOUTH WEST WATER PL

Generic Multisensor Integration Strategy and Innovative Error Analysis for Integrated Navigation

A modern multisensor integrated navigation system applied in most of civilian applications typically consists of GNSS (Global Navigation Satellite System) receivers, IMUs (Inertial Measurement Unit), and/or other sensors, e.g., odometers and cameras. With the increasing availabilities of low-cost sensors, more research and development activities aim to build a cost-effective system without sacrificing navigational performance. Three principal contributions of this dissertation are as follows: i) A multisensor kinematic positioning and navigation system built on Linux Operating System (OS) with Real Time Application Interface (RTAI), York University Multisensor Integrated System (YUMIS), was designed and realized to integrate GNSS receivers, IMUs, and cameras. YUMIS sets a good example of a low-cost yet high-performance multisensor inertial navigation system and lays the ground work in a practical and economic way for the personnel training in following academic researches. ii) A generic multisensor integration strategy (GMIS) was proposed, which features a) the core system model is developed upon the kinematics of a rigid body; b) all sensor measurements are taken as raw measurement in Kalman filter without differentiation. The essential competitive advantages of GMIS over the conventional error-state based strategies are: 1) the influences of the IMU measurement noises on the final navigation solutions are effectively mitigated because of the increased measurement redundancy upon the angular rate and acceleration of a rigid body; 2) The state and measurement vectors in the estimator with GMIS can be easily expanded to fuse multiple inertial sensors and all other types of measurements, e.g., delta positions; 3) one can directly perform error analysis upon both raw sensor data (measurement noise analysis) and virtual zero-mean process noise measurements (process noise analysis) through the corresponding measurement residuals of the individual measurements and the process noise measurements. iii) The a posteriori variance component estimation (VCE) was innovatively accomplished as an advanced analytical tool in the extended Kalman Filter employed by the GMIS, which makes possible the error analysis of the raw IMU measurements for the very first time, together with the individual independent components in the process noise vector