Safe navigation and human-robot interaction in assistant robotic applications

L'abstract è presente nell'allegato / the abstract is in the attachmen

Robots learn to behave: improving human-robot collaboration in flexible manufacturing applications

L'abstract è presente nell'allegato / the abstract is in the attachmen

On the Utility of Representation Learning Algorithms for Myoelectric Interfacing

Electrical activity produced by muscles during voluntary movement is a reflection of the firing patterns of relevant motor neurons and, by extension, the latent motor intent driving the movement. Once transduced via electromyography (EMG) and converted into digital form, this activity can be processed to provide an estimate of the original motor intent and is as such a feasible basis for non-invasive efferent neural interfacing. EMG-based motor intent decoding has so far received the most attention in the field of upper-limb prosthetics, where alternative means of interfacing are scarce and the utility of better control apparent. Whereas myoelectric prostheses have been available since the 1960s, available EMG control interfaces still lag behind the mechanical capabilities of the artificial limbs they are intended to steer—a gap at least partially due to limitations in current methods for translating EMG into appropriate motion commands. As the relationship between EMG signals and concurrent effector kinematics is highly non-linear and apparently stochastic, finding ways to accurately extract and combine relevant information from across electrode sites is still an active area of inquiry.This dissertation comprises an introduction and eight papers that explore issues afflicting the status quo of myoelectric decoding and possible solutions, all related through their use of learning algorithms and deep Artificial Neural Network (ANN) models. Paper I presents a Convolutional Neural Network (CNN) for multi-label movement decoding of high-density surface EMG (HD-sEMG) signals. Inspired by the successful use of CNNs in Paper I and the work of others, Paper II presents a method for automatic design of CNN architectures for use in myocontrol. Paper III introduces an ANN architecture with an appertaining training framework from which simultaneous and proportional control emerges. Paper Iv introduce a dataset of HD-sEMG signals for use with learning algorithms. Paper v applies a Recurrent Neural Network (RNN) model to decode finger forces from intramuscular EMG. Paper vI introduces a Transformer model for myoelectric interfacing that do not need additional training data to function with previously unseen users. Paper vII compares the performance of a Long Short-Term Memory (LSTM) network to that of classical pattern recognition algorithms. Lastly, paper vIII describes a framework for synthesizing EMG from multi-articulate gestures intended to reduce training burden

Vision 2040: A Roadmap for Integrated, Multiscale Modeling and Simulation of Materials and Systems

Over the last few decades, advances in high-performance computing, new materials characterization methods, and, more recently, an emphasis on integrated computational materials engineering (ICME) and additive manufacturing have been a catalyst for multiscale modeling and simulation-based design of materials and structures in the aerospace industry. While these advances have driven significant progress in the development of aerospace components and systems, that progress has been limited by persistent technology and infrastructure challenges that must be overcome to realize the full potential of integrated materials and systems design and simulation modeling throughout the supply chain. As a result, NASA's Transformational Tools and Technology (TTT) Project sponsored a study (performed by a diverse team led by Pratt & Whitney) to define the potential 25-year future state required for integrated multiscale modeling of materials and systems (e.g., load-bearing structures) to accelerate the pace and reduce the expense of innovation in future aerospace and aeronautical systems. This report describes the findings of this 2040 Vision study (e.g., the 2040 vision state; the required interdependent core technical work areas, Key Element (KE); identified gaps and actions to close those gaps; and major recommendations) which constitutes a community consensus document as it is a result of over 450 professionals input obtain via: 1) four society workshops (AIAA, NAFEMS, and two TMS), 2) community-wide survey, and 3) the establishment of 9 expert panels (one per KE) consisting on average of 10 non-team members from academia, government and industry to review, update content, and prioritize gaps and actions. The study envisions the development of a cyber-physical-social ecosystem comprised of experimentally verified and validated computational models, tools, and techniques, along with the associated digital tapestry, that impacts the entire supply chain to enable cost-effective, rapid, and revolutionary design of fit-for-purpose materials, components, and systems. Although the vision focused on aeronautics and space applications, it is believed that other engineering communities (e.g., automotive, biomedical, etc.) can benefit as well from the proposed framework with only minor modifications. Finally, it is TTT's hope and desire that this vision provides the strategic guidance to both public and private research and development decision makers to make the proposed 2040 vision state a reality and thereby provide a significant advancement in the United States global competitiveness

Multiphase flow modelling for enhanced oil and gas drilling and production

From the exploration to the abandonment of an oil and gas discovery, operators and engineers are constantly faced with the challenge of achieving the best commercial potential of oil fields. Although the petroleum engineering community has significantly contributed towards maximising the potential of discovered prospects, the approach adopted so far has been compartmentalised with little (heuristics-based) or no quality integration. The highly interconnected nature of the decision factors affecting the management of any field requires increased implementation of Computer-Aided Process Engineering (CAPE) methods, thus presenting a task for which chemical engineers have the background to make useful contributions. Drilling and production are the two primary challenging operations of oilfield activities, which span through different time horizons with both fast and slow-paced dynamics. These attributes of these systems make the application of modelling, simulation, and optimisation tasks difficult. This PhD project aims to improve field planning and development decisions from a Process Systems Engineering (PSE) perspective via numerical (fluid dynamics) simulations and modelbased deterministic optimisation of drilling and production operations, respectively. Also demonstrated in this work is the importance of deterministic optimisation as a reliable alternative to classical heuristic methods. From a drilling operation perspective, this project focuses on the application of Computational Fluid Dynamics (CFD) as a tool to understand the intricacies of cuttings transport (during wellbore cleaning) with drilling fluids of non-Newtonian rheology. Simulations of two-phase solid-liquid flows in an annular domain are carried out, with a detailed analysis on the impact of several drilling parameters (drill pipe eccentricity, inclination angle, drill pipe rotation, bit penetration rate, fluid rheology, and particle properties) on the cuttings concentration, pressure drop profiles, axial fluid, and solid velocities. The influence of the flow regime (laminar and turbulent) on cuttings transport efficiency is also examined using the Eulerian-Eulerian and Lagrangian-Eulerian modelling methods. With experimentally validated simulations, this aspect of the PhD project provides new understanding on the interdependence of these parameters; thus facilitating industrial wellbore cleaning operations. The second part of this project applies mathematical optimisation techniques via reduced-order modelling strategies for the enhancement of petroleum recovery under complex constraints that characterise production operations. The motivation for this aspect of the project stems from the observation that previous PSE-based contributions aimed at enhancing field profitability, often apply over-simplifications of the actual process or neglect some key performance indices due to problem complexity. However, this project focuses on a more detailed computational integration and optimisation of the models describing the whole field development process from the reservoir to the surface facilities to ensure optimal field operations. Nonlinear Programs (NLPs), Mixed-Integer Linear Programs (MILPs), and Mixed-Integer Nonlinear Programs (MINLPs) are formulated for this purpose and solved using high-fidelity simulators and algorithms in open-source and commercial solvers. Compared to previous studies, more flow physics are incorporated and rapid computations obtained, thus enabling real-time decision support for enhanced production in the oil and gas industry

Quantum Sensing Experiments with Superconducting Qubits

Quantum sensing is a vast and emerging field enabling in-situ studies of quantum systems and hence the development of quantum hybrid systems. This work creates the fundament of direct superconducting-magnetic hybrid systems by developing a local microwave sensing scheme and studying the influence of a static magnetic field on a superconducting qubit. Finally, a proof-of-principle hybrid system is demonstrated, which opens the path towards superconducting-magnetic quantum circuits

3D-in-2D Displays for ATC.

This paper reports on the efforts and accomplishments of the 3D-in-2D Displays for ATC project at the end of Year 1. We describe the invention of 10 novel 3D/2D visualisations that were mostly implemented in the Augmented Reality ARToolkit. These prototype implementations of visualisation and interaction elements can be viewed on the accompanying video. We have identified six candidate design concepts which we will further research and develop. These designs correspond with the early feasibility studies stage of maturity as defined by the NASA Technology Readiness Level framework. We developed the Combination Display Framework from a review of the literature, and used it for analysing display designs in terms of display technique used and how they are combined. The insights we gained from this framework then guided our inventions and the human-centered innovation process we use to iteratively invent. Our designs are based on an understanding of user work practices. We also developed a simple ATC simulator that we used for rapid experimentation and evaluation of design ideas. We expect that if this project continues, the effort in Year 2 and 3 will be focus on maturing the concepts and employment in a operational laboratory settings

IEA ECES Annex 31 Final Report - Energy Storage with Energy Efficient Buildings and Districts: Optimization and Automation

At present, the energy requirements in buildings are majorly met from non-renewable sources where the contribution of renewable sources is still in its initial stage. Meeting the peak energy demand by non-renewable energy sources is highly expensive for the utility companies and it critically influences the environment through GHG emissions. In addition, renewable energy sources are inherently intermittent in nature. Therefore, to make both renewable and nonrenewable energy sources more efficient in building/district applications, they should be integrated with energy storage systems. Nevertheless, determination of the optimal operation and integration of energy storage with buildings/districts are not straightforward. The real strength of integrating energy storage technologies with buildings/districts is stalled by the high computational demand (or even lack of) tools and optimization techniques. Annex 31 aims to resolve this gap by critically addressing the challenges in integrating energy storage systems in buildings/districts from the perspective of design, development of simplified modeling tools and optimization techniques

Laboratory Directed Research and Development Program FY 2004 Annual Report

The Oak Ridge National Laboratory (ORNL) Laboratory Directed Research and Development (LDRD) Program reports its status to the U.S. Department of Energy (DOE) in March of each year. The program operates under the authority of DOE Order 413.2A, 'Laboratory Directed Research and Development' (January 8, 2001), which establishes DOE's requirements for the program while providing the Laboratory Director broad flexibility for program implementation. LDRD funds are obtained through a charge to all Laboratory programs. This report describes all ORNL LDRD research activities supported during FY 2004 and includes final reports for completed projects and shorter progress reports for projects that were active, but not completed, during this period. The FY 2004 ORNL LDRD Self-Assessment (ORNL/PPA-2005/2) provides financial data about the FY 2004 projects and an internal evaluation of the program's management process. ORNL is a DOE multiprogram science, technology, and energy laboratory with distinctive capabilities in materials science and engineering, neutron science and technology, energy production and end-use technologies, biological and environmental science, and scientific computing. With these capabilities ORNL conducts basic and applied research and development (R&D) to support DOE's overarching national security mission, which encompasses science, energy resources, environmental quality, and national nuclear security. As a national resource, the Laboratory also applies its capabilities and skills to the specific needs of other federal agencies and customers through the DOE Work For Others (WFO) program. Information about the Laboratory and its programs is available on the Internet at <http://www.ornl.gov/>. LDRD is a relatively small but vital DOE program that allows ORNL, as well as other multiprogram DOE laboratories, to select a limited number of R&D projects for the purpose of: (1) maintaining the scientific and technical vitality of the Laboratory; (2) enhancing the Laboratory's ability to address future DOE missions; (3) fostering creativity and stimulating exploration of forefront science and technology; (4) serving as a proving ground for new research; and (5) supporting high-risk, potentially high-value R&D. Through LDRD the Laboratory is able to improve its distinctive capabilities and enhance its ability to conduct cutting-edge R&D for its DOE and WFO sponsors. To meet the LDRD objectives and fulfill the particular needs of the Laboratory, ORNL has established a program with two components: the Director's R&D Fund and the Seed Money Fund. As outlined in Table 1, these two funds are complementary. The Director's R&D Fund develops new capabilities in support of the Laboratory initiatives, while the Seed Money Fund is open to all innovative ideas that have the potential for enhancing the Laboratory's core scientific and technical competencies. Provision for multiple routes of access to ORNL LDRD funds maximizes the likelihood that novel and seminal ideas with scientific and technological merit will be recognized and supported