Modeling and Analysis of Fault Tolerant Multistage Interconnection Networks

Performance and reliability are two of the most crucial issues in today\u27s high-performance instrumentation and measurement systems. High speed and compact density multistage interconnection networks (MINs) are widely-used subsystems in different applications. New performance models are proposed to evaluate a novel fault tolerant MIN arrangement, thereby assuring performance and reliability with high confidence level. A concurrent fault detection and recovery scheme for MINs is considered by rerouting over redundant interconnection links under stringent real-time constraints for digital instrumentation as sensor networks. A switch architecture for concurrent testing and diagnosis is proposed. New performance models are developed and used to evaluate the compound effect of fault tolerant operation (inclusive of testing, diagnosis, and recovery) on the overall throughput and delay. Results are shown for single transient and permanent stuck-at faults on links and storage units in the switching elements. It is shown that performance degradation due to fault tolerance is graceful while performance degradation without fault recovery is unacceptable

Analyzing Traffic and Multicast Switch Issues in an ATM Network.

This dissertation attempts to solve two problems related to an ATM network. First, we consider packetized voice and video sources as the incoming traffic to an ATM multiplexer and propose modeling methods for both individual and aggregated traffic sources. These methods are, then, used to analyze performance parameters such as buffer occupancy, cell loss probability, and cell delay. Results, thus obtained, for different buffer sizes and number of voice and video sources are analyzed and compared with those generated from existing techniques. Second, we study the priority handling feature for time critical services in an ATM multicast switch. For this, we propose a non-blocking copy network and priority handling algorithms. We, then, analyze the copy network using an analytical method and simulation. The analysis utilizes both priority and non-priority cells for two different output reservation schemes. The performance parameters, based on cell delay, delay jitter, and cell loss probability, are studied for different buffer sizes and fan-outs under various input traffic loads. Our results show that the proposed copy network provides a better performance for the priority cells while the performance for the non-priority cells is slightly inferior in comparison with the scenario when the network does not consider priority handling. We also study the fault-tolerant behavior of the copy network, specially for the broadcast banyan network subsection, and present a routing scheme considering the non-blocking property under a specific pattern of connection assignments. A fault tolerant characteristic can be quantified using the full access probability. The computation of the full access probability for a general network is known to be NP-hard. We, therefore, provide a new bounding technique utilizing the concept of minimal cuts to compute full access probability of the copy network. Our study for the fault-tolerant multi-stage interconnection network having either an extra stage or chaining shows that the proposed technique provides tighter bounds as compared to those given by existing approaches. We also apply our bounding method to compute full access probability of the fault-tolerant copy network

Satellite Networks: Architectures, Applications, and Technologies

Since global satellite networks are moving to the forefront in enhancing the national and global information infrastructures due to communication satellites' unique networking characteristics, a workshop was organized to assess the progress made to date and chart the future. This workshop provided the forum to assess the current state-of-the-art, identify key issues, and highlight the emerging trends in the next-generation architectures, data protocol development, communication interoperability, and applications. Presentations on overview, state-of-the-art in research, development, deployment and applications and future trends on satellite networks are assembled

Design and Analysis of Optical Interconnection Networks for Parallel Computation.

In this doctoral research, we propose several novel protocols and topologies for the interconnection of massively parallel processors. These new technologies achieve considerable improvements in system performance and structure simplicity. Currently, synchronous protocols are used in optical TDM buses. The major disadvantage of a synchronous protocol is the waste of packet slots. To offset this inherent drawback of synchronous TDM, a pipelined asynchronous TDM optical bus is proposed. The simulation results show that the performance of the proposed bus is significantly better than that of known pipelined synchronous TDM optical buses. Practically, the computation power of the plain TDM protocol is limited. Various extensions must be added to the system. In this research, a new pipelined optical TDM bus for implementing a linear array parallel computer architecture is proposed. The switches on the receiving segment of the bus can be dynamically controlled, which make the system highly reconfigurable. To build large and scalable systems, we need new network architectures that are suitable for optical interconnections. A new kind of reconfigurable bus called segmented bus is introduced to achieve reduced structure simplicity and increased concurrency. We show that parallel architectures based on segmented buses are versatile by showing that it can simulate parallel communication patterns supported by a wide variety of networks with small slowdown factors. New kinds of interconnection networks, the hypernetworks, have been proposed recently. Compared with point-to-point networks, they allow for increased resource-sharing and communication bandwidth utilization, and they are especially suitable for optical interconnects. One way to derive a hypernetwork is by finding the dual of a point-to-point network. Hypercube Q\sb{n}, where n is the dimension, is a very popular point-to-point network. It is interesting to construct hypernetworks from the dual Q\sbsp{n}{*} of hypercube of Q\sb{n}. In this research, the properties of Q\sbsp{n}{*} are investigated and a set of fundamental data communication algorithms for Q\sbsp{n}{*} are presented. The results indicate that the Q\sbsp{n}{*} hypernetwork is a useful and promising interconnection structure for high-performance parallel and distributed computing systems

Bandwidth management and quality of service

With the advent of bandwidth-hungry video and audio applications, demand for bandwidth is expected to exceed supply. Users will require more bandwidth and, as always, there are likely to be more users. As the Internet user base becomes more diverse, there is an increasing perception that Internet Service Providers (ISPs) should be able to differentiate between users, so that the specific needs of different types of users can be met. Differentiated services is seen as a possible solution to the bandwidth problem. Currently, however, the technology used on the Internet differentiates neither between users, nor between applications. The thesis focuses on current and anticipated bandwidth shortages on the Internet, and on the lack of a differentiated service. The aim is to identify methods of managing bandwidth and to investigate how these bandwidth management methods can be used to provide a differentiated service. The scope of the study is limited to networks using both Ethernet technology and the Internet Protocol (IP). Tile study is significant because it addresses current problems confronted by network managers. The key terms, Quality of Service (QoS) and bandwidth management, are defined. “QoS” is equated to a differentiating system. Bandwidth management is defined as any method of controlling and allocating bandwidth. Installing more capacity is taken to be a method of bandwidth management. The review of literature concentrates on Ethernet/IP networks. It begins with a detailed examination of definitions and interpretations of the term Quality of Service and shows how the meaning changed over the last decade. The review then examines congestion control, including a survey of queuing methods. Priority queuing implemented in hardware is examined in detail, followed by a review of the ReSource reserVation Protocol (RSVP) and a new version of IP (lPv6). Finally, the new standards IEEE 802.1p and IEEE 802.1Q are outlined, and parts of ISO/IEC 15802-3 are analysed. The Integrated Services Architecture (ISA), Differentiated Services (DiffServ) and MultiProtocol Label Switching (MPLS) are seen as providing a theoretical framework for QoS development. The Open Systems Interconnection Reference Model (OSI model) is chosen as the preferred framework for investigating bandwidth management because it is more comprehensive than the alternative US Department of Defence Model (DoD model). A case study of the Edith Cowan University (ECU) data network illustrates current practice in network management. It provides concrete examples of some of the problems, methods and solutions identified in the literary review. Bandwidth management methods are identified and categorised based on the OSI layers in which they operate. Suggestions are given as to how some of these bandwidth management methods are, or can be used within current QoS architectures. The experimental work consists of two series of tests on small, experimental LANs. The tests are aimed at evaluating the effectiveness of IEEE 802.1 p prioritisation. The results suggest that in small Local Area Networks (LANs) prioritisation provides no benefit when Ethernet switches are lightly loaded

Learning algorithms for the control of routing in integrated service communication networks

There is a high degree of uncertainty regarding the nature of traffic on future integrated service networks. This uncertainty motivates the use of adaptive resource allocation policies that can take advantage of the statistical fluctuations in the traffic demands. The adaptive control mechanisms must be 'lightweight', in terms of their overheads, and scale to potentially large networks with many traffic flows. Adaptive routing is one form of adaptive resource allocation, and this thesis considers the application of Stochastic Learning Automata (SLA) for distributed, lightweight adaptive routing in future integrated service communication networks. The thesis begins with a broad critical review of the use of Artificial Intelligence (AI) techniques applied to the control of communication networks. Detailed simulation models of integrated service networks are then constructed, and learning automata based routing is compared with traditional techniques on large scale networks. Learning automata are examined for the 'Quality-of-Service' (QoS) routing problem in realistic network topologies, where flows may be routed in the network subject to multiple QoS metrics, such as bandwidth and delay. It is found that learning automata based routing gives considerable blocking probability improvements over shortest path routing, despite only using local connectivity information and a simple probabilistic updating strategy. Furthermore, automata are considered for routing in more complex environments spanning issues such as multi-rate traffic, trunk reservation, routing over multiple domains, routing in high bandwidth-delay product networks and the use of learning automata as a background learning process. Automata are also examined for routing of both 'real-time' and 'non-real-time' traffics in an integrated traffic environment, where the non-real-time traffic has access to the bandwidth 'left over' by the real-time traffic. It is found that adopting learning automata for the routing of the real-time traffic may improve the performance to both real and non-real-time traffics under certain conditions. In addition, it is found that one set of learning automata may route both traffic types satisfactorily. Automata are considered for the routing of multicast connections in receiver-oriented, dynamic environments, where receivers may join and leave the multicast sessions dynamically. Automata are shown to be able to minimise the average delay or the total cost of the resulting trees using the appropriate feedback from the environment. Automata provide a distributed solution to the dynamic multicast problem, requiring purely local connectivity information and a simple updating strategy. Finally, automata are considered for the routing of multicast connections that require QoS guarantees, again in receiver-oriented dynamic environments. It is found that the distributed application of learning automata leads to considerably lower blocking probabilities than a shortest path tree approach, due to a combination of load balancing and minimum cost behaviour