271 research outputs found
Architecting a One-to-many Traffic-Aware and Secure Millimeter-Wave Wireless Network-in-Package Interconnect for Multichip Systems
With the aggressive scaling of device geometries, the yield of complex Multi Core Single Chip(MCSC) systems with many cores will decrease due to the higher probability of manufacturing defects especially, in dies with a large area. Disintegration of large System-on-Chips(SoCs) into smaller chips called chiplets has shown to improve the yield and cost of complex systems. Therefore, platform-based computing modules such as embedded systems and micro-servers have already adopted Multi Core Multi Chip (MCMC) architectures overMCSC architectures. Due to the scaling of memory intensive parallel applications in such systems, data is more likely to be shared among various cores residing in different chips resulting in a significant increase in chip-to-chip traffic, especially one-to-many traffic. This one-to-many traffic is originated mainly to maintain cache-coherence between many cores residing in multiple chips. Besides, one-to-many traffics are also exploited by many parallel programming models, system-level synchronization mechanisms, and control signals. How-ever, state-of-the-art Network-on-Chip (NoC)-based wired interconnection architectures do not provide enough support as they handle such one-to-many traffic as multiple unicast trafficusing a multi-hop MCMC communication fabric. As a result, even a small portion of such one-to-many traffic can significantly reduce system performance as traditional NoC-basedinterconnect cannot mask the high latency and energy consumption caused by chip-to-chipwired I/Os. Moreover, with the increase in memory intensive applications and scaling of MCMC systems, traditional NoC-based wired interconnects fail to provide a scalable inter-connection solution required to support the increased cache-coherence and synchronization generated one-to-many traffic in future MCMC-based High-Performance Computing (HPC) nodes. Therefore, these computation and memory intensive MCMC systems need an energy-efficient, low latency, and scalable one-to-many (broadcast/multicast) traffic-aware interconnection infrastructure to ensure high-performance.
Research in recent years has shown that Wireless Network-in-Package (WiNiP) architectures with CMOS compatible Millimeter-Wave (mm-wave) transceivers can provide a scalable, low latency, and energy-efficient interconnect solution for on and off-chip communication. In this dissertation, a one-to-many traffic-aware WiNiP interconnection architecture with a starvation-free hybrid Medium Access Control (MAC), an asymmetric topology, and a novel flow control has been proposed. The different components of the proposed architecture are individually one-to-many traffic-aware and as a system, they collaborate with each other to provide required support for one-to-many traffic communication in a MCMC environment. It has been shown that such interconnection architecture can reduce energy consumption and average packet latency by 46.96% and 47.08% respectively for MCMC systems.
Despite providing performance enhancements, wireless channel, being an unguided medium, is vulnerable to various security attacks such as jamming induced Denial-of-Service (DoS), eavesdropping, and spoofing. Further, to minimize the time-to-market and design costs, modern SoCs often use Third Party IPs (3PIPs) from untrusted organizations. An adversary either at the foundry or at the 3PIP design house can introduce a malicious circuitry, to jeopardize an SoC. Such malicious circuitry is known as a Hardware Trojan (HT). An HTplanted in the WiNiP from a vulnerable design or manufacturing process can compromise a Wireless Interface (WI) to enable illegitimate transmission through the infected WI resulting in a potential DoS attack for other WIs in the MCMC system. Moreover, HTs can be used for various other malicious purposes, including battery exhaustion, functionality subversion, and information leakage. This information when leaked to a malicious external attackercan reveals important information regarding the application suites running on the system, thereby compromising the user profile. To address persistent jamming-based DoS attack in WiNiP, in this dissertation, a secure WiNiP interconnection architecture for MCMC systems has been proposed that re-uses the one-to-many traffic-aware MAC and existing Design for Testability (DFT) hardware along with Machine Learning (ML) approach. Furthermore, a novel Simulated Annealing (SA)-based routing obfuscation mechanism was also proposed toprotect against an HT-assisted novel traffic analysis attack. Simulation results show that,the ML classifiers can achieve an accuracy of 99.87% for DoS attack detection while SA-basedrouting obfuscation could reduce application detection accuracy to only 15% for HT-assistedtraffic analysis attack and hence, secure the WiNiP fabric from age-old and emerging attacks
On-board B-ISDN fast packet switching architectures. Phase 2: Development. Proof-of-concept architecture definition report
For the next-generation packet switched communications satellite system with onboard processing and spot-beam operation, a reliable onboard fast packet switch is essential to route packets from different uplink beams to different downlink beams. The rapid emergence of point-to-point services such as video distribution, and the large demand for video conference, distributed data processing, and network management makes the multicast function essential to a fast packet switch (FPS). The satellite's inherent broadcast features gives the satellite network an advantage over the terrestrial network in providing multicast services. This report evaluates alternate multicast FPS architectures for onboard baseband switching applications and selects a candidate for subsequent breadboard development. Architecture evaluation and selection will be based on the study performed in phase 1, 'Onboard B-ISDN Fast Packet Switching Architectures', and other switch architectures which have become commercially available as large scale integration (LSI) devices
Recommended from our members
On Multicast in Asynchronous Networks-on-Chip: Techniques, Architectures, and FPGA Implementation
In this era of exascale computing, conventional synchronous design techniques are facing unprecedented challenges. The consumer electronics market is replete with many-core systems in the range of 16 cores to thousands of cores on chip, integrating multi-billion transistors. However, with this ever increasing complexity, the traditional design approaches are facing key issues such as increasing chip power, process variability, aging, thermal problems, and scalability. An alternative paradigm that has gained significant interest in the last decade is asynchronous design. Asynchronous designs have several potential advantages: they are naturally energy proportional, burning power only when active, do not require complex clock distribution, are robust to different forms of variability, and provide ease of composability for heterogeneous platforms. Networks-on-chip (NoCs) is an interconnect paradigm that has been introduced to deal with the ever-increasing system complexity. NoCs provide a distributed, scalable, and efficient interconnect solution for today’s many-core systems. Moreover, NoCs are a natural match with asynchronous design techniques, as they separate communication infrastructure and timing from the computational elements. To this end, globally-asynchronous locally-synchronous (GALS) systems that interconnect multiple processing cores, operating at different clock speeds, using an asynchronous NoC, have gained significant interest. While asynchronous NoCs have several advantages, they also face a key challenge of supporting new types of traffic patterns. Once such pattern is multicast communication, where a source sends packets to arbitrary number of destinations. Multicast is not only common in parallel computing, such as for cache coherency, but also for emerging areas such as neuromorphic computing. This important capability has been largely missing from asynchronous NoCs. This thesis introduces several efficient multicast solutions for these interconnects. In particular, techniques, and network architectures are introduced to support high-performance and low-power multicast. Two leading network topologies are the focus: a variant mesh-of-trees (MoT) and a 2D mesh. In addition, for a more realistic implementation and analysis, as well as significantly advancing the field of asynchronous NoCs, this thesis also targets synthesis of these NoCs on commercial FPGAs. While there has been significant advances in FPGA technologies, there has been only limited research on implementing asynchronous NoCs on FPGAs. To this end, a systematic computeraided design (CAD) methodology has been introduced to efficiently and safely map asynchronous NoCs on FPGAs. Overall, this thesis makes the following three contributions. The first contribution is a multicast solution for a variant MoT network topology. This topology consists of simple low-radix switches, and has been used in high-performance computing platforms. A novel local speculation technique is introduced, where a subset of the network’s switches are speculative that always broadcast every packet. These switches are very simple and have high performance. Speculative switches are surrounded by non-speculative ones that route packets based on their destinations and also throttle any redundant copies created by the former. This hybrid network architecture achieved significant performance and power benefits over other multicast approaches. The second contribution is a multicast solution for a 2D-mesh topology, which is more complex with higher-radix switches and also is more commonly used. A novel continuous-time replication strategy is introduced to optimize the critical multi-way forking operation of a multicast transmission. In this technique, a multicast packet is first stored in an input port of a switch, from where it is sent through distinct output ports towards different destinations concurrently, at each output’s own rate and in continuous time. This strategy is shown to have significant latency and energy benefits over an approach that performs multicast using multiple distinct serial unicasts to each destination. Finally, a systematic CAD methodology is introduced to synthesize asynchronous NoCs on commercial FPGAs. A two-fold goal is targeted: correctness and high performance. For ease of implementation, only existing FPGA synthesis tools are used. Moreover, since asynchronous NoCs involve special asynchronous components, a comprehensive guide is introduced to map these elements correctly and efficiently. Two asynchronous NoC switches are synthesized using the proposed approach on a leading Xilinx FPGA in 28 nm: one that only handles unicast, and the other that also supports multicast. Both showed significant energy benefits with some performance gains over a state-of-the-art synchronous switch
Area and Energy Opimized QCA Based Shuffle-Exchange Network with Multicast and Broadcast Configuration
In any wide-range processing system, rapid interconnecting networks are employed between the processing modules and embedded systems. This study deals with the optimized design and implementation of Switching Element (SE) which operates in four modes, accepting two inputs and delivering two outputs. The Shuffle-Exchange Network (SEN) can be used as a single-stage as well as a multi-stage network. SEN is used as an interconnection architecture which is implemented with exclusive input-output paths with simple design. The SE acts as a building block to the Multi-stage Shuffle-Exchange Network (M-SEN) with facilities to perform unicast and multicast operation on the inputs. An 8x8 M-SEN model is also implemented, which works in three modes of communication, termed as "One-to-One", "One-to-Many" and "One-to-All" M-SEN configuration. All the QCA circuits have been implemented and simulated using CAD tool QCADesigner. The proposed QCA-based M-SEN design is better in terms of area occupied by 14.63%, average energy dissipation by 22.75% and cell count with a reduction of 84 cells when compared to reference M-SEN architecture. The optimization of the design in terms of cell count and area results in lesser energy dissipation and hence can be used in future-generation complex networks and communication systems
Tunneling Horizontal IEC 61850 Traffic through Audio Video Bridging Streams for Flexible Microgrid Control and Protection
In this paper, it is argued that some low-level aspects of the usual IEC 61850 mapping to Ethernet are not well suited to microgrids due to their dynamic nature and geographical distribution as compared to substations. It is proposed that the integration of IEEE time-sensitive networking (TSN) concepts (which are currently implemented as audio video bridging (AVB) technologies) within an IEC 61850 / Manufacturing Message Specification framework provides a flexible and reconfigurable platform capable of overcoming such issues. A prototype test platform and bump-in-the-wire device for tunneling horizontal traffic through AVB are described. Experimental results are presented for sending IEC 61850 GOOSE (generic object oriented substation events) and SV (sampled values) messages through AVB tunnels. The obtained results verify that IEC 61850 event and sampled data may be reliably transported within the proposed framework with very low latency, even over a congested network. It is argued that since AVB streams can be flexibly configured from one or more central locations, and bandwidth reserved for their data ensuring predictability of delivery, this gives a solution which seems significantly more reliable than a pure MMS-based solution
Network-on-Chip
Addresses the Challenges Associated with System-on-Chip Integration Network-on-Chip: The Next Generation of System-on-Chip Integration examines the current issues restricting chip-on-chip communication efficiency, and explores Network-on-chip (NoC), a promising alternative that equips designers with the capability to produce a scalable, reusable, and high-performance communication backbone by allowing for the integration of a large number of cores on a single system-on-chip (SoC). This book provides a basic overview of topics associated with NoC-based design: communication infrastructure design, communication methodology, evaluation framework, and mapping of applications onto NoC. It details the design and evaluation of different proposed NoC structures, low-power techniques, signal integrity and reliability issues, application mapping, testing, and future trends. Utilizing examples of chips that have been implemented in industry and academia, this text presents the full architectural design of components verified through implementation in industrial CAD tools. It describes NoC research and developments, incorporates theoretical proofs strengthening the analysis procedures, and includes algorithms used in NoC design and synthesis. In addition, it considers other upcoming NoC issues, such as low-power NoC design, signal integrity issues, NoC testing, reconfiguration, synthesis, and 3-D NoC design. This text comprises 12 chapters and covers: The evolution of NoC from SoC—its research and developmental challenges NoC protocols, elaborating flow control, available network topologies, routing mechanisms, fault tolerance, quality-of-service support, and the design of network interfaces The router design strategies followed in NoCs The evaluation mechanism of NoC architectures The application mapping strategies followed in NoCs Low-power design techniques specifically followed in NoCs The signal integrity and reliability issues of NoC The details of NoC testing strategies reported so far The problem of synthesizing application-specific NoCs Reconfigurable NoC design issues Direction of future research and development in the field of NoC Network-on-Chip: The Next Generation of System-on-Chip Integration covers the basic topics, technology, and future trends relevant to NoC-based design, and can be used by engineers, students, and researchers and other industry professionals interested in computer architecture, embedded systems, and parallel/distributed systems
System-on-chip architecture for secure sub-microsecond synchronization systems
213 p.En esta tesis, se pretende abordar los problemas que conlleva la protección cibernética del Precision Time Protocol (PTP). Éste es uno de los protocolos de comunicación más sensibles de entre los considerados por los organismos de estandarización para su aplicación en las futuras Smart Grids o redes eléctricas inteligentes. PTP tiene como misión distribuir una referencia de tiempo desde un dispositivo maestro al resto de dispositivos esclavos, situados dentro de una misma red, de forma muy precisa. El protocolo es altamente vulnerable, ya que introduciendo tan sólo un error de tiempo de un microsegundo, pueden causarse graves problemas en las funciones de protección del equipamiento eléctrico, o incluso detener su funcionamiento. Para ello, se propone una nueva arquitectura System-on-Chip basada en dispositivos reconfigurables, con el objetivo de integrar el protocolo PTP y el conocido estándar de seguridad MACsec para redes Ethernet. La flexibilidad que los modernos dispositivos reconfigurables proporcionan, ha sido aprovechada para el diseño de una arquitectura en la que coexisten procesamiento hardware y software. Los resultados experimentales avalan la viabilidad de utilizar MACsec para proteger la sincronización en entornos industriales, sin degradar la precisión del protocolo
Optical Wireless Data Center Networks
Bandwidth and computation-intensive Big Data applications in disciplines like social media, bio- and nano-informatics, Internet-of-Things (IoT), and real-time analytics, are pushing existing access and core (backbone) networks as well as Data Center Networks (DCNs) to their limits. Next generation DCNs must support continuously increasing network traffic while satisfying minimum performance requirements of latency, reliability, flexibility and scalability. Therefore, a larger number of cables (i.e., copper-cables and fiber optics) may be required in conventional wired DCNs. In addition to limiting the possible topologies, large number of cables may result into design and development problems related to wire ducting and maintenance, heat dissipation, and power consumption.
To address the cabling complexity in wired DCNs, we propose OWCells, a class of optical wireless cellular data center network architectures in which fixed line of sight (LOS) optical wireless communication (OWC) links are used to connect the racks arranged in regular polygonal topologies. We present the OWCell DCN architecture, develop its theoretical underpinnings, and investigate routing protocols and OWC transceiver design. To realize a fully wireless DCN, servers in racks must also be connected using OWC links. There is, however, a difficulty of connecting multiple adjacent network components, such as servers in a rack, using point-to-point LOS links. To overcome this problem, we propose and validate the feasibility of an FSO-Bus to connect multiple adjacent network components using NLOS point-to-point OWC links. Finally, to complete the design of the OWC transceiver, we develop a new class of strictly and rearrangeably non-blocking multicast optical switches in which multicast is performed efficiently at the physical optical (lower) layer rather than upper layers (e.g., application layer).
Advisors: Jitender S. Deogun and Dennis R. Alexande
SpiNNaker: Fault tolerance in a power- and area- constrained large-scale neuromimetic architecture
AbstractSpiNNaker is a biologically-inspired massively-parallel computer designed to model up to a billion spiking neurons in real-time. A full-fledged implementation of a SpiNNaker system will comprise more than 105 integrated circuits (half of which are SDRAMs and half multi-core systems-on-chip). Given this scale, it is unavoidable that some components fail and, in consequence, fault-tolerance is a foundation of the system design. Although the target application can tolerate a certain, low level of failures, important efforts have been devoted to incorporate different techniques for fault tolerance. This paper is devoted to discussing how hardware and software mechanisms collaborate to make SpiNNaker operate properly even in the very likely scenario of component failures and how it can tolerate system-degradation levels well above those expected
- …