AI and OR in management of operations: history and trends

The last decade has seen a considerable growth in the use of Artificial Intelligence (AI) for operations management with the aim of finding solutions to problems that are increasing in complexity and scale. This paper begins by setting the context for the survey through a historical perspective of OR and AI. An extensive survey of applications of AI techniques for operations management, covering a total of over 1200 papers published from 1995 to 2004 is then presented. The survey utilizes Elsevier's ScienceDirect database as a source. Hence, the survey may not cover all the relevant journals but includes a sufficiently wide range of publications to make it representative of the research in the field. The papers are categorized into four areas of operations management: (a) design, (b) scheduling, (c) process planning and control and (d) quality, maintenance and fault diagnosis. Each of the four areas is categorized in terms of the AI techniques used: genetic algorithms, case-based reasoning, knowledge-based systems, fuzzy logic and hybrid techniques. The trends over the last decade are identified, discussed with respect to expected trends and directions for future work suggested

On the role of pre and post-processing in environmental data mining

The quality of discovered knowledge is highly depending on data quality. Unfortunately real data use to contain noise, uncertainty, errors, redundancies or even irrelevant information. The more complex is the reality to be analyzed, the higher the risk of getting low quality data. Knowledge Discovery from Databases (KDD) offers a global framework to prepare data in the right form to perform correct analyses. On the other hand, the quality of decisions taken upon KDD results, depend not only on the quality of the results themselves, but on the capacity of the system to communicate those results in an understandable form. Environmental systems are particularly complex and environmental users particularly require clarity in their results. In this paper some details about how this can be achieved are provided. The role of the pre and post processing in the whole process of Knowledge Discovery in environmental systems is discussed

A simple state-based prognostic model for filter clogging

In today's maintenance planning, fuel filters are replaced or cleaned on a regular basis. Monitoring and implementation of prognostics on filtration system have the potential to avoid costs and increase safety. Prognostics is a fundamental technology within Integrated Vehicle Health Management (IVHM). Prognostic models can be categorised into three major categories: 1) Physics-based models 2) Data-driven models 3) Experience-based models. One of the challenges in the progression of the clogging filter failure is the inability to observe the natural clogging filter failure due to time constraint. This paper presents a simple solution to collect data for a clogging filter failure. Also, it represents a simple state-based prognostic with duration information (SSPD) method that aims to detect and forecast clogging of filter in a laboratory based fuel rig system. The progression of the clogging filter failure is created unnaturally. The degradation level is divided into several groups. Each group is defined as a state in the failure progression of clogging filter. Then, the data is collected to create the clogging filter progression states unnaturally. The SSPD method consists of three steps: clustering, clustering evaluation, and remaining useful life (RUL) estimation. Prognosis results show that the SSPD method is able to predicate the RUL of the clogging filter accurately

Computational intelligence techniques for HVAC systems: a review

Buildings are responsible for 40% of global energy use and contribute towards 30% of the total CO2 emissions. The drive to reduce energy use and associated greenhouse gas emissions from buildings has acted as a catalyst in the development of advanced computational methods for energy efficient design, management and control of buildings and systems. Heating, ventilation and air conditioning (HVAC) systems are the major source of energy consumption in buildings and an ideal candidate for substantial reductions in energy demand. Significant advances have been made in the past decades on the application of computational intelligence (CI) techniques for HVAC design, control, management, optimization, and fault detection and diagnosis. This article presents a comprehensive and critical review on the theory and applications of CI techniques for prediction, optimization, control and diagnosis of HVAC systems.The analysis of trends reveals the minimization of energy consumption was the key optimization objective in the reviewed research, closely followed by the optimization of thermal comfort, indoor air quality and occupant preferences. Hardcoded Matlab program was the most widely used simulation tool, followed by TRNSYS, EnergyPlus, DOE–2, HVACSim+ and ESP–r. Metaheuristic algorithms were the preferred CI method for solving HVAC related problems and in particular genetic algorithms were applied in most of the studies. Despite the low number of studies focussing on MAS, as compared to the other CI techniques, interest in the technique is increasing due to their ability of dividing and conquering an HVAC optimization problem with enhanced overall performance. The paper also identifies prospective future advancements and research directions

Comparison between unipolar and bipolar single phase grid-connected inverters for PV applications

An inverter is essential for the interfacing of photovoltaic panels with the AC network. There are many possible inverter topologies and inverter switching schemes and each one will have its own relative advantages and disadvantages. Efficiency and output current distortion are two important factors governing the choice of inverter system. In this paper, it is argued that current controlled inverters offer significant advantages from the point of view of minimisation of current distortion. Two inverter switching strategies are explored in detail. These are the unipolar current controlled inverter and the bipolar current controlled inverter. With respect to low frequency distortion, previously published works provide theoretical arguments in favour of bipolar switching. On the other hand it has also been argued that the unipolar switched inverter offers reduced switching losses and generates less EMI. On efficiency grounds, it appears that the unipolar switched inverter has an advantage. However, experimental results presented in this paper show that the level of low frequency current distortion in the unipolar switched inverter is such that it can only comply with Australian Standard 4777.2 above a minimum output current. On the other hand it is shown that at the same current levels bipolar switching results in reduced low frequency harmonics

Comparison between unipolar and bipolar single phase grid-connected inverters for PV applications

An inverter is essential for the interfacing of photovoltaic panels with the AC network. There are many possible inverter topologies and inverter switching schemes and each one will have its own relative advantages and disadvantages. Efficiency and output current distortion are two important factors governing the choice of inverter system. In this paper, it is argued that current controlled inverters offer significant advantages from the point of view of minimisation of current distortion. Two inverter switching strategies are explored in detail. These are the unipolar current controlled inverter and the bipolar current controlled inverter. With respect to low frequency distortion, previously published works provide theoretical arguments in favour of bipolar switching. On the other hand it has also been argued that the unipolar switched inverter offers reduced switching losses and generates less EMI. On efficiency grounds, it appears that the unipolar switched inverter has an advantage. However, experimental results presented in this paper show that the level of low frequency current distortion in the unipolar switched inverter is such that it can only comply with Australian Standard 4777.2 above a minimum output current. On the other hand it is shown that at the same current levels bipolar switching results in reduced low frequency harmonics

Fault propagation, detection and analysis in process systems

Process systems are often complicated and liable to experience faults and their effects. Faults can adversely affect the safety of the plant, its environmental impact and economic operation. As such, fault diagnosis in process systems is an active area of research and development in both academia and industry. The work reported in this thesis contributes to fault diagnosis by exploring the modelling and analysis of fault propagation and detection in process systems. This is done by posing and answering three research questions. What are the necessary ingredients of a fault diagnosis model? What information should a fault diagnosis model yield? Finally, what types of model are appropriate to fault diagnosis? To answer these questions , the assumption of the research is that the behaviour of a process system arises from the causal structure of the process system. On this basis, the research presented in this thesis develops a two-level approach to fault diagnosis based on detailed process information, and modelling and analysis techniques for representing causality. In the first instance, a qualitative approach is developed called a level 1 fusion. The level 1 fusion models the detailed causality of the system using digraphs. The level 1 fusion is a causal map of the process. Such causal maps can be searched to discover and analyse fault propagation paths through the process. By directly building on the level 1 fusion, a quantitative level 2 fusion is developed which uses a type of digraph called a Bayesian network. By associating process variables with fault variables, and using conditional probability theory, it is shown how measured effects can be used to calculate and rank the probability of candidate causes. The novel contributions are the development of a systematic approach to fault diagnosis based on modelling the chemistry, physics, and architecture of the process. It is also shown how the control and instrumentation system constrains the casualty of the process. By demonstrating how digraph models can be reversed, it is shown how both cause-to-effect and effect-to-cause analysis can be carried out. In answering the three research questions, this research shows that it is feasible to gain detailed insights into fault propagation by qualitatively modelling the physical causality of the process system. It is also shown that a qualitative fault diagnosis model can be used as the basis for a quantitative fault diagnosis modelOpen Acces

A decision support system for on-line leakage localization

This paper describes a model-driven decision-support system (software tool) implementing a model-based methodology for on-line leakage detection and localization which is useful for a large class of water distribution networks. Since these methods present a certain degree of complexity which limits their use to experts, the proposed software tool focuses on the integration of a method emphasizing its use by water network managers as a decision support system. The proposed software tool integrates a model-based leakage localization methodology based on the use of on-line telemetry information, as well as a water network calibrated hydraulic model. The application of the resulting decision support software tool in a district metered area (DMA) of the Barcelona distribution network is provided and discussed. The obtained results show that the leakage detection and localization may be performed efficiently reducing the required time. © 2014 Elsevier Ltd.The authors wish to thank the support received by the AM0901 project funded by R+i Alliance (Suez Environnement) and by the EFFINET grant FP7-ICT-2012-318556 of the European Commission.Peer Reviewe

Smart Urban Water Networks

This book presents the paper form of the Special Issue (SI) on Smart Urban Water Networks. The number and topics of the papers in the SI confirm the growing interest of operators and researchers for the new paradigm of smart networks, as part of the more general smart city. The SI showed that digital information and communication technology (ICT), with the implementation of smart meters and other digital devices, can significantly improve the modelling and the management of urban water networks, contributing to a radical transformation of the traditional paradigm of water utilities. The paper collection in this SI includes different crucial topics such as the reliability, resilience, and performance of water networks, innovative demand management, and the novel challenge of real-time control and operation, along with their implications for cyber-security. The SI collected fourteen papers that provide a wide perspective of solutions, trends, and challenges in the contest of smart urban water networks. Some solutions have already been implemented in pilot sites (i.e., for water network partitioning, cyber-security, and water demand disaggregation and forecasting), while further investigations are required for other methods, e.g., the data-driven approaches for real time control. In all cases, a new deal between academia, industry, and governments must be embraced to start the new era of smart urban water systems