4,509 research outputs found

    Kernel-based fault diagnosis of inertial sensors using analytical redundancy

    Get PDF
    Kernel methods are able to exploit high-dimensional spaces for representational advantage, while only operating implicitly in such spaces, thus incurring none of the computational cost of doing so. They appear to have the potential to advance the state of the art in control and signal processing applications and are increasingly seeing adoption across these domains. Applications of kernel methods to fault detection and isolation (FDI) have been reported, but few in aerospace research, though they offer a promising way to perform or enhance fault detection. It is mostly in process monitoring, in the chemical processing industry for example, that these techniques have found broader application. This research work explores the use of kernel-based solutions in model-based fault diagnosis for aerospace systems. Specifically, it investigates the application of these techniques to the detection and isolation of IMU/INS sensor faults – a canonical open problem in the aerospace field. Kernel PCA, a kernelised non-linear extension of the well-known principal component analysis (PCA) algorithm, is implemented to tackle IMU fault monitoring. An isolation scheme is extrapolated based on the strong duality known to exist between probably the most widely practiced method of FDI in the aerospace domain – the parity space technique – and linear principal component analysis. The algorithm, termed partial kernel PCA, benefits from the isolation properties of the parity space method as well as the non-linear approximation ability of kernel PCA. Further, a number of unscented non-linear filters for FDI are implemented, equipped with data-driven transition models based on Gaussian processes - a non-parametric Bayesian kernel method. A distributed estimation architecture is proposed, which besides fault diagnosis can contemporaneously perform sensor fusion. It also allows for decoupling faulty sensors from the navigation solution

    Dynamic process fault isolation by partial DPCA

    Get PDF
    Principal component analysis (PCA) is a popular tool in fault detecting of the complex plant, but offers little support on fault isolation. Partial PCA (PPCA) is well developed for its capability of fault isolation utilizing a structured residual. In this paper, partial dynamic PCA(PDPCA) is proposed to enhance the isolation ability of dynamic process, which is a method combining PPCA and dynamic PCA. Simulation of PDPCA on a CSTR shows the effectiveness of the proposed method

    Development of a Data Driven Multiple Observer and Causal Graph Approach for Fault Diagnosis of Nuclear Power Plant Sensors and Field Devices

    Get PDF
    Data driven multiple observer and causal graph approach to fault detection and isolation is developed for nuclear power plant sensors and actuators. It can be integrated into the advanced instrumentation and control system for the next generation nuclear power plants. The developed approach is based on analytical redundancy principle of fault diagnosis. Some analytical models are built to generate the residuals between measured values and expected values. Any significant residuals are used for fault detection and the residual patterns are analyzed for fault isolation. Advanced data driven modeling methods such as Principal Component Analysis and Adaptive Network Fuzzy Inference System are used to achieve on-line accurate and consistent models. As compared with most current data-driven modeling, it is emphasized that the best choice of model structure should be obtained from physical study on a system. Multiple observer approach realizes strong fault isolation through designing appropriate residual structures. Even if one of the residuals is corrupted, the approach is able to indicate an unknown fault instead of a misleading fault. Multiple observers are designed through making full use of the redundant relationships implied in a process when predicting one variable. Data-driven causal graph is developed as a generic approach to fault diagnosis for nuclear power plants where limited fault information is available. It has the potential of combining the reasoning capability of qualitative diagnostic method and the strength of quantitative diagnostic method in fault resolution. A data-driven causal graph consists of individual nodes representing plant variables connected with adaptive quantitative models. With the causal graph, fault detection is fulfilled by monitoring the residual of each model. Fault isolation is achieved by testing the possible assumptions involved in each model. Conservatism is implied in the approach since a faulty sensor or a fault actuator signal is isolated only when their reconstructions can fully explain all the abnormal behavior of the system. The developed approaches have been applied to nuclear steam generator system of a pressurized water reactor and a simulation code has been developed to show its performance. The results show that both single and dual sensor faults and actuator faults can be detected and isolated correctly independent of fault magnitudes and initial power level during early fault transient

    AI-based Diagnostics for Fault Detection and Isolation in Process Equipment Service

    Get PDF
    Recent industry requires efficient fault discovering and isolation solutions in process equipment service. This problem is a real-world problem of typically ill-defined systems, hard to model, with large-scale solution spaces. Design of precise models is impractical, too expensive, or often non-existent. Support service of equipment requires generating models that can analyze the equipment data, interpreting the past behavior and predicting the future one. These problems pose a challenge to traditional modeling techniques and represent a great opportunity for the application of AI-based methodologies, which enable us to deal with imprecise, uncertain data and incomplete domain knowledge typically encountered in real-world applications. In this paper the state of the art, theoretical background of conventional and AI-based techniques in support of service tasks and illustration of some applications to process equipment service on bio-ethanol production process are shortly described

    Fault Diagnosis Via Univariate Frequency Analysis Monitoring: A Novel Technique Applied to a Simulated Integrated Drive Generator

    Get PDF
    The purpose of this research was to develop a fault detection and diagnostic method that would be able to detect and isolate seeded faults in data that was generated from a simulated integrated drive generator. The approach to the solution for this problem is summarized below. A novel approach for the detection and diagnoses of an anomaly due the occurrence of a fault within a system has been developed. This innovative technique uses specific characteristics of the frequency spectrum of a univariate signal to monitor system health for abnormal behavior due to previously characterized component failure. A fault detection and diagnostic scheme was developed that used dual heteroassociative kernel regression models. The first of these empirical models estimates selected features from the analytical redundant spectrum characteristic profile of the exciter current using power demand, a stressor, placed on the system as input query. The predicted spectrum features were compared to the actual characteristic features, which resulted in the generation of a residual signal. This signal was then analyzed in order to determine if they were the result of normal system disturbances or a predefined fault. If a fault was detected, the residual signal was passed to the second model, which isolated, and given enough information, identified the specific component of components causing the anomaly. Two case studies are presented to illustrate the capability to detect, isolate, and identify a system anomaly. As demonstrated, the monitoring of the frequency spectrum of a single variable can provide adequate indication of equipment health. With the availability of the appropriate data, as in the first case, it is possible for the development of three-layer detection and diagnostic systems that provides fault detection, isolation, and identification. A three-layer detection and diagnostic system is essential in the development of more advance health monitoring and prognostic systems. Despite some shortcomings in the simulated data made available for this work, this method is believed to be applicable to data that more realistically captures real-world relationships, including sensor noise and faults that grow with time

    Real-Time Monitoring and Fault Diagnostics in Roll-To-Roll Manufacturing Systems

    Full text link
    A roll-to-roll (R2R) process is a manufacturing technique involving continuous processing of a flexible substrate as it is transferred between rotating rolls. It integrates many additive and subtractive processing techniques to produce rolls of product in an efficient and cost-effective way due to its high production rate and mass quantity. Therefore, the R2R processes have been increasingly implemented in a wide range of manufacturing industries, including traditional paper/fabric production, plastic and metal foil manufacturing, flexible electronics, thin film batteries, photovoltaics, graphene films production, etc. However, the increasing complexity of R2R processes and high demands on product quality have heightened the needs for effective real-time process monitoring and fault diagnosis in R2R manufacturing systems. This dissertation aims at developing tools to increase system visibility without additional sensors, in order to enhance real-time monitoring, and fault diagnosis capability in R2R manufacturing systems. First, a multistage modeling method is proposed for process monitoring and quality estimation in R2R processes. Product-centric and process-centric variation propagation are introduced to characterize variation propagation throughout the system. The multistage model mainly focuses on the formulation of process-centric variation propagation, which uniquely exists in R2R processes, and the corresponding product quality measurements with both physical knowledge and sensor data analysis. Second, a nonlinear analytical redundancy method is proposed for sensor validation to ensure the accuracy of sensor measurements for process and quality control. Parity relations based on nonlinear observation matrix are formulated to characterize system dynamics and sensor measurements. Robust optimization is designed to identify the coefficient of parity relations that can tolerate a certain level of measurement noise and system disturbances. The effect of the change of operating conditions on the value of the optimal objective function – parity residuals and the optimal design variables – parity coefficients are evaluated with sensitivity analysis. Finally, a multiple model approach for anomaly detection and fault diagnosis is introduced to improve the diagnosability under different operating regimes. The growing structure multiple model system (GSMMS) is employed, which utilizes Voronoi sets to automatically partition the entire operating space into smaller operating regimes. The local model identification problem is revised by formulating it into an optimization problem based on the loss minimization framework and solving with the mini-batch stochastic gradient descent method instead of least squares algorithms. This revision to the GSMMS method expands its capability to handle the local model identification problems that cannot be solved with a closed-form solution. The effectiveness of the models and methods are determined with testbed data from an R2R process. The results show that those proposed models and methods are effective tools to understand variation propagation in R2R processes and improve estimation accuracy of product quality by 70%, identify the health status of sensors promptly to guarantee data accuracy for modeling and decision making, and reduce false alarm rate and increase detection power under different operating conditions. Eventually, those tools developed in this thesis contribute to increase the visibility of R2R manufacturing systems, improve productivity and reduce product rejection rate.PHDMechanical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/146114/1/huanyis_1.pd

    Application of a Fault Detection and Isolation System on a Rotary Machine

    Get PDF
    The paper illustrates the design and the implementation of a Fault Detection and Isolation (FDI) system to a rotary machine like a multishaft centrifugal compressor. A model-free approach, that is, the Principal Component Analysis (PCA), has been employed to solve the fault detection issue. For the fault isolation purpose structured residuals have been adopted while an adaptive threshold has been designed in order to detect and to isolate the faults. To prove the goodness of the proposed FDI system, historical data of a nitrogen centrifugal compressor employed in a refinery plant are considered. Tests results show that detection and isolation of single as well as multiple faults are successfully achieved

    Integrating PCA and structural model decomposition to improve fault monitoring and diagnosis with varying operation points

    Get PDF
    Producción CientíficaFast and efficient fault monitoring and diagnostics methods are essential for fault diagnosis and prognosis tasks in Health Monitoring Systems. These tasks are even more complicated when facing dynamic systems with multiple operation points. This article introduces a symbiotic solution for fault detection and isolation, based on the integration of two complementary techniques: Possible Conflicts (PCs), a model-based diagnosis technique from the Artificial Intelligence (AI) community, and Principal Component Analysis (PCA), a Multivariate Statistical Process Control (MSPC) technique. Our proposal improves the PCA-based fault detection in systems with multiple operation points and transient states and provides a straightforward fault isolation stage for PCA. At the same time, the proposal increases the robustness for fault detection using PCs through the application of PCA to the residual signals. PCA has the ability to filter out residual deviations caused by model uncertainties that can lead to a high number of false positives. The proposed method has been successfully tested in a real-world plant with accurate fault detection results. The plant has noisy sensors and a system model without the same accuracy at each operation point and transient states.Ministerio de Ciencia e Innovación (PID2021-126659OB-I00
    corecore