58 research outputs found
Tolerating multiple faults in multistage interconnection networks with minimal extra stages
Adams and Siegel (1982) proposed an extra stage cube interconnection network that tolerates one switch failure with one extra stage. We extend their results and discover a class of extra stage interconnection networks that tolerate multiple switch failures with a minimal number of extra stages. Adopting the same fault model as Adams and Siegel, the faulty switches can be bypassed by a pair of demultiplexer/multiplexer combinations. It is easy to show that, to maintain point to point and broadcast connectivities, there must be at least S extra stages to tolerate I switch failures. We present the first known construction of an extra stage interconnection network that meets this lower-bound. This 12-dimensional multistage interconnection network has n+f stages and tolerates I switch failures. An n-bit label called mask is used for each stage that indicates the bit differences between the two inputs coming into a common switch. We designed the fault-tolerant construction such that it repeatedly uses the singleton basis of the n-dimensional vector space as the stage mask vectors. This construction is further generalized and we prove that an n-dimensional multistage interconnection network is optimally fault-tolerant if and only if the mask vectors of every n consecutive stages span the n-dimensional vector space
Fault tolerant clos network
Multistage interconnection networks, or MINs, provide paths between functional modules in multiprocessor systems. The MINs are usually segmented into several stages. Each stage connects inputs to appropriate links of the next stage so that the cumulative effect of all the stages satisfies input-output connection requirements.
This thesis deals with a fault tolerant Clos network. The fault tolerance technique involves addition of extra switches per stage to compensate for any switch failure The reliability analysis of both ordinary and fault tolerant Clos networks is presented. The optimal number of extra switches required to get the best reliability results has been analyzed
Fault-tolerant interconnection networks for multiprocessor systems
Interconnection networks represent the backbone of multiprocessor systems. A failure in the network, therefore, could seriously degrade the system performance. For this reason, fault tolerance has been regarded as a major consideration in interconnection network design. This thesis presents two novel techniques to provide fault tolerance capabilities to three major networks: the Baseline network, the Benes network and the Clos network.
First, the Simple Fault Tolerance Technique (SFT) is presented. The SFT technique is in fact the result of merging two widely known interconnection mechanisms: a normal interconnection network and a shared bus. This technique is most suitable for networks with small switches, such as the Baseline network and the Benes network. For the Clos network, whose switches may be large for the SFT, another technique is developed to produce the Fault-Tolerant Clos (FTC) network. In the FTC, one switch is added to each stage. The two techniques are described and thoroughly analyzed
Evaluation of Two Terminal Reliability of Fault-tolerant Multistage Interconnection Networks
This paper iOntroduces a new method based on multi-decomposition for predicting the two terminal reliability of fault-tolerant multistage interconnection networks. The method is well supported by an efficient algorithm which runs polynomially. The method is well illustrated by taking a network consists of eight nodes and twelve links as an example. The proposed method is found to be simple, general and efficient and thus is as such applicable to all types of fault-tolerant multistage interconnection networks. The results show this method provides a greater accurate probability when applied on fault-tolerant multistage interconnection networks. Reliability of two important MINs are evaluated by using the proposed method
Symmetric rearrangeable networks and algorithms
A class of symmetric rearrangeable nonblocking networks has been considered in this thesis. A particular focus of this thesis is on Benes networks built with 2 x 2 switching elements. Symmetric rearrangeable networks built with larger switching elements have also being considered. New applications of these networks are found in the areas of System on Chip (SoC) and Network on Chip (NoC). Deterministic routing algorithms used in NoC applications suffer low scalability and slow execution time. On the other hand, faster algorithms are blocking and thus limit throughput. This will be an acceptable trade-off for many applications where achieving ”wire speed” on the on-chip network would require extensive optimisation of the attached devices. In this thesis I designed an algorithm that has much lower blocking probabilities than other suboptimal algorithms but a much faster execution time than deterministic routing algorithms. The suboptimal method uses the looping algorithm in its outermost stages and then in the two distinct subnetworks deeper in the switch uses a fast but suboptimal path search method to find available paths. The worst case time complexity of this new routing method is O(NlogN) using a single processor, which matches the best known results reported in the literature.
Disruption of the ongoing communications in this class of networks during rearrangements is an open issue. In this thesis I explored a modification of the topology of these networks which gives rise to what is termed as repackable networks. A repackable topology allows rearrangements of paths without intermittently losing connectivity by breaking the existing communication paths momentarily. The repackable network structure proposed in this thesis is efficient in its use of hardware when compared to other proposals in the literature.
As most of the deterministic algorithms designed for Benes networks implement a permutation of all inputs to find the routing tags for the requested inputoutput pairs, I proposed a new algorithm that can work for partial permutations. If the network load is defined as ρ, the mean number of active inputs in a partial permutation is, m = ρN, where N is the network size. This new method is based on mapping the network stages into a set of sub-matrices and then determines the routing tags for each pair of requests by populating the cells of the sub-matrices without creating a blocking state. Overall the serial time complexity of this method is O(NlogN) and O(mlogN) where all N inputs are active and with m < N active inputs respectively. With minor modification to the serial algorithm this method can be made to work in the parallel domain. The time complexity of this routing algorithm in a parallel machine with N completely connected processors is O(log^2 N). With m active requests the time complexity goes down to (logmlogN), which is better than the O(log^2 m + logN), reported in the literature for 2^0.5((log^2 -4logN)^0.5-logN)<= ρ <= 1. I also designed multistage symmetric rearrangeable networks using larger switching elements and implement a new routing algorithm for these classes of networks.
The network topology and routing algorithms presented in this thesis should allow large scale networks of modest cost, with low setup times and moderate blocking rates, to be constructed. Such switching networks will be required to meet the bandwidth requirements of future communication networks
Dynamic Systolization for Developing Multiprocessor Supercomputers
A dynamic network approach is introduced for developing reconfigurable, systolic arrays or wavefront processors; This allows one to design very powerful and flexible processors to be used in a general-purpose, reconfigurable, and fault-tolerant, multiprocessor computer system. The concepts of macro-dataflow and multitasking can be integrated to handle variable-resolution granularities in computationally intensive algorithms. A multiprocessor architecture, Remps, is proposed based on these design methodologies. The Remps architecture is generalized from the Cedar, HEP, Cray X- MP, Trac, NYU ultracomputer, S-l, Pumps, Chip, and SAM projects. Our goal is to provide a multiprocessor research model for developing design methodologies, multiprocessing and multitasking supports, dynamic systolic/wavefront array processors, interconnection networks, reconfiguration techniques, and performance analysis tools. These system design and operational techniques should be useful to those who are developing or evaluating multiprocessor supercomputers
Application of advanced on-board processing concepts to future satellite communications systems: Bibliography
Abstracts are presented of a literature survey of reports concerning the application of signal processing concepts. Approximately 300 references are included
Tolerating multiple faults in multistage interconnection networks with minimal extra stages
- …