Fault Detection and Prediction in Elevators Using FFT-based Features

The purpose of this study is to find out how Fast Fourier Transform (FFT) based features could be used in fault detection and prediction in elevators. The overall main objective is to improve on the existing maintenance systems. The data we analyzed in this work were obtained through applying FFT on vertical vibration signal of each elevator movement. The goal was to study the trend of data over time and detect any significant change that can indicate potential faulty behaviors inside elevators. Due to the challenges in analyzing a stream of high-dimensional FFT data, we decided to utilize two dimensionality reduction techniques, namely Feature selection with Dominant frequencies analysis and Feature extraction with Autoencoder. After that, we used change point detection on the newly acquired features to detect significant changes. For validation, we first observed the FFT spectrum of each elevator and singled out the ones that contain clear visual changes. For these elevators, we estimated the visual change points and had them as the target outputs for our algorithms. The goal was to see if our implementation of feature selection and feature extraction, combined with change point detection could correctly the target change points. Final results showed that all significant visual changes in the original spectrums could be detected through the use of feature selection and feature extraction, together with change point detection. Furthermore, we were able to calculate the percentage change in mean vibration amplitude of elevators to determine the most problematic cases with high increases in vibration level. These findings indicated that FFT based features can be used in identifying potential faulty behaviors in elevator systems and the techniques used in this work have shown promising results

Diagnostic Spatio-temporal Transformer with Faithful Encoding

This paper addresses the task of anomaly diagnosis when the underlying data generation process has a complex spatio-temporal (ST) dependency. The key technical challenge is to extract actionable insights from the dependency tensor characterizing high-order interactions among temporal and spatial indices. We formalize the problem as supervised dependency discovery, where the ST dependency is learned as a side product of multivariate time-series classification. We show that temporal positional encoding used in existing ST transformer works has a serious limitation in capturing higher frequencies (short time scales). We propose a new positional encoding with a theoretical guarantee, based on discrete Fourier transform. We also propose a new ST dependency discovery framework, which can provide readily consumable diagnostic information in both spatial and temporal directions. Finally, we demonstrate the utility of the proposed model, DFStrans (Diagnostic Fourier-based Spatio-temporal Transformer), in a real industrial application of building elevator control

Machine learning as an online diagnostic tool for proton exchange membrane fuel cells

Proton exchange membrane fuel cells are considered a promising power supply system with high efficiency and zero emissions. They typically work within a relatively narrow range of temperature and humidity to achieve optimal performance; however, this makes the system difficult to control, leading to faults and accelerated degradation. Two main approaches can be used for diagnosis, limited data input which provides an unintrusive, rapid but limited analysis, or advanced characterisation that provides a more accurate diagnosis but often requires invasive or slow measurements. To provide an accurate diagnosis with rapid data acquisition, machine learning methods have shown great potential. However, there is a broad approach to the diagnostic algorithms and signals used in the field. This article provides a critical view of the current approaches and suggests recommendations for future methodologies of machine learning in fuel cell diagnostic applications

Predictive maintenance : an autoencoder anomaly-based approach for a 3 DoF delta robot

Performing predictive maintenance (PdM) is challenging for many reasons. Dealing with large datasets which may not contain run-to-failure data (R2F) complicates PdM even more. When no R2F data are available, identifying condition indicators (CIs), estimating the health index (HI), and thereafter, calculating a degradation model for predicting the remaining useful lifetime (RUL) are merely impossible using supervised learning. In this paper, a 3 DoF delta robot used for pick and place task is studied. In the proposed method, autoencoders (AEs) are used to predict when maintenance is required based on the signal sequence distribution and anomaly detection, which is vital when no R2F data are available. Due to the sequential nature of the data, nonlinearity of the system, and correlations between parameter time-series, convolutional layers are used for feature extraction. Thereafter, a sigmoid function is used to predict the probability of having an anomaly given CIs acquired from AEs. This function can be manually tuned given the sensitivity of the system or optimized by solving a minimax problem. Moreover, the proposed architecture can be used for fault localization for the specified system. Additionally, the proposed method can calculate RUL using Gaussian process (GP), as a degradation model, given HI values as its input

Transfer Learning Based Fault Detection for Suspension System Using Vibrational Analysis and Radar Plots

The suspension system is of paramount importance in any automobile. Thanks to the suspension system, every journey benefits from pleasant rides, stable driving and precise handling. However, the suspension system is prone to faults that can significantly impact the driving quality of the vehicle. This makes it essential to find and diagnose any faults in the suspension system and rectify them immediately. Numerous techniques have been used to identify and diagnose suspension faults, each with drawbacks. This paper’s proposed suspension fault detection system aims to detect these faults using deep transfer learning techniques instead of the time-consuming and expensive conventional methods. This paper used pre-trained networks such as Alex Net, ResNet-50, Google Net and VGG16 to identify the faults using radar plots of the vibration signals generated by the suspension system in eight cases. The vibration data were acquired using an accelerometer and data acquisition system placed on a test rig for eight different test conditions (seven faulty, one good). The deep learning model with the highest accuracy in identifying and detecting faults among the four models was chosen and adopted to find defects. The results state that VGG16 produced the highest classification accuracy of 96.70%

Deep Quantile Regression for Unsupervised Anomaly Detection in Time-Series

YesTime-series anomaly detection receives increasing research interest given the growing number of data-rich application domains. Recent additions to anomaly detection methods in research literature include deep neural networks (DNNs: e.g., RNN, CNN, and Autoencoder). The nature and performance of these algorithms in sequence analysis enable them to learn hierarchical discriminative features and time-series temporal nature. However, their performance is affected by usually assuming a Gaussian distribution on the prediction error, which is either ranked, or threshold to label data instances as anomalous or not. An exact parametric distribution is often not directly relevant in many applications though. This will potentially produce faulty decisions from false anomaly predictions due to high variations in data interpretation. The expectations are to produce outputs characterized by a level of confidence. Thus, implementations need the Prediction Interval (PI) that quantify the level of uncertainty associated with the DNN point forecasts, which helps in making better-informed decision and mitigates against false anomaly alerts. An effort has been made in reducing false anomaly alerts through the use of quantile regression for identification of anomalies, but it is limited to the use of quantile interval to identify uncertainties in the data. In this paper, an improve time-series anomaly detection method called deep quantile regression anomaly detection (DQR-AD) is proposed. The proposed method go further to used quantile interval (QI) as anomaly score and compare it with threshold to identify anomalous points in time-series data. The tests run of the proposed method on publicly available anomaly benchmark datasets demonstrate its effective performance over other methods that assumed Gaussian distribution on the prediction or reconstruction cost for detection of anomalies. This shows that our method is potentially less sensitive to data distribution than existing approaches.Petroleum Technology Development Fund (PTDF) PhD Scholarship, Nigeria (Award Number: PTDF/ ED/PHD/IAT/884/16

Deep and transfer learning for building occupancy detection: A review and comparative analysis

The building internet of things (BIoT) is quite a promising concept for curtailing energy consumption, reducing costs, and promoting building transformation. Besides, integrating artificial intelligence (AI) into the BIoT is essential for data analysis and intelligent decision-making. Thus, data-driven approaches to infer occupancy patterns usage are gaining growing interest in BIoT applications. Typically, analyzing big occupancy data gathered by BIoT networks helps significantly identify the causes of wasted energy and recommend corrective actions. Within this context, building occupancy data aids in the improvement of the efficacy of energy management systems, allowing the reduction of energy consumption while maintaining occupant comfort. Occupancy data might be collected using a variety of devices. Among those devices are optical/thermal cameras, smart meters, environmental sensors such as carbon dioxide (CO2), and passive infrared (PIR). Even though the latter methods are less precise, they have generated considerable attention owing to their inexpensive cost and low invasive nature. This article provides an in-depth survey of the strategies used to analyze sensor data and determine occupancy. The article's primary emphasis is on reviewing deep learning (DL), and transfer learning (TL) approaches for occupancy detection. This work investigates occupancy detection methods to develop an efficient system for processing sensor data while providing accurate occupancy information. Moreover, the paper conducted a comparative study of the readily available algorithms for occupancy detection to determine the optimal method in regards to training time and testing accuracy. The main concerns affecting the current occupancy detection system in terms of privacy and precision were thoroughly discussed. For occupancy detection, several directions were provided to avoid or reduce privacy problems by employing forthcoming technologies such as edge devices, Federated learning, and Blockchain-based IoT. 2022 The AuthorsThis paper was made possible by the Graduate Assistant-ship (GA) program provided from Qatar University (QU). The statements made herein are solely the responsibility of the authors. Open Access funding provided by the Qatar National Library.Scopu

Koneoppimiskehys petrokemianteollisuuden sovelluksille

Machine learning has many potentially useful applications in process industry, for example in process monitoring and control. Continuously accumulating process data and the recent development in software and hardware that enable more advanced machine learning, are fulfilling the prerequisites of developing and deploying process automation integrated machine learning applications which improve existing functionalities or even implement artificial intelligence. In this master's thesis, a framework is designed and implemented on a proof-of-concept level, to enable easy acquisition of process data to be used with modern machine learning libraries, and to also enable scalable online deployment of the trained models. The literature part of the thesis concentrates on studying the current state and approaches for digital advisory systems for process operators, as a potential application to be developed on the machine learning framework. The literature study shows that the approaches for process operators' decision support tools have shifted from rule-based and knowledge-based methods to machine learning. However, no standard methods can be concluded, and most of the use cases are quite application-specific. In the developed machine learning framework, both commercial software and open source components with permissive licenses are used. Data is acquired over OPC UA and then processed in Python, which is currently almost the de facto standard language in data analytics. Microservice architecture with containerization is used in the online deployment, and in a qualitative evaluation, it proved to be a versatile and functional solution.Koneoppimisella voidaan osoittaa olevan useita hyödyllisiä käyttökohteita prosessiteollisuudessa, esimerkiksi prosessinohjaukseen liittyvissä sovelluksissa. Jatkuvasti kerääntyvä prosessidata ja toisaalta koneoppimiseen soveltuvien ohjelmistojen sekä myös laitteistojen viimeaikainen kehitys johtavat tilanteeseen, jossa prosessiautomaatioon liitettyjen koneoppimissovellusten avulla on mahdollista parantaa nykyisiä toiminnallisuuksia tai jopa toteuttaa tekoälysovelluksia. Tässä diplomityössä suunniteltiin ja toteutettiin prototyypin tasolla koneoppimiskehys, jonka avulla on helppo käyttää prosessidataa yhdessä nykyaikaisten koneoppimiskirjastojen kanssa. Kehys mahdollistaa myös koneopittujen mallien skaalautuvan käyttöönoton. Diplomityön kirjallisuusosa keskittyy prosessioperaattoreille tarkoitettujen digitaalisten avustajajärjestelmien nykytilaan ja toteutustapoihin, avustajajärjestelmän tai sen päätöstukijärjestelmän ollessa yksi mahdollinen koneoppimiskehyksen päälle rakennettava ohjelma. Kirjallisuustutkimuksen mukaan prosessioperaattorin päätöstukijärjestelmien taustalla olevat menetelmät ovat yhä useammin koneoppimiseen perustuvia, aiempien sääntö- ja tietämyskantoihin perustuvien menetelmien sijasta. Selkeitä yhdenmukaisia lähestymistapoja ei kuitenkaan ole helposti pääteltävissä kirjallisuuden perusteella. Lisäksi useimmat tapausesimerkit ovat sovellettavissa vain kyseisissä erikoistapauksissa. Kehitetyssä koneoppimiskehyksessä on käytetty sekä kaupallisia että avoimen lähdekoodin komponentteja. Prosessidata haetaan OPC UA -protokollan avulla, ja sitä on mahdollista käsitellä Python-kielellä, josta on muodostunut lähes de facto -standardi data-analytiikassa. Kehyksen käyttöönottokomponentit perustuvat mikropalveluarkkitehtuuriin ja konttiteknologiaan, jotka osoittautuivat laadullisessa testauksessa monipuoliseksi ja toimivaksi toteutustavaksi

Analyzing Granger causality in climate data with time series classification methods

Attribution studies in climate science aim for scientifically ascertaining the influence of climatic variations on natural or anthropogenic factors. Many of those studies adopt the concept of Granger causality to infer statistical cause-effect relationships, while utilizing traditional autoregressive models. In this article, we investigate the potential of state-of-the-art time series classification techniques to enhance causal inference in climate science. We conduct a comparative experimental study of different types of algorithms on a large test suite that comprises a unique collection of datasets from the area of climate-vegetation dynamics. The results indicate that specialized time series classification methods are able to improve existing inference procedures. Substantial differences are observed among the methods that were tested