Integrated Support for Handoff Management and Context-Awareness in Heterogeneous Wireless Networks

The overwhelming success of mobile devices and wireless communications is stressing the need for the development of mobility-aware services. Device mobility requires services adapting their behavior to sudden context changes and being aware of handoffs, which introduce unpredictable delays and intermittent discontinuities. Heterogeneity of wireless technologies (Wi-Fi, Bluetooth, 3G) complicates the situation, since a different treatment of context-awareness and handoffs is required for each solution. This paper presents a middleware architecture designed to ease mobility-aware service development. The architecture hides technology-specific mechanisms and offers a set of facilities for context awareness and handoff management. The architecture prototype works with Bluetooth and Wi-Fi, which today represent two of the most widespread wireless technologies. In addition, the paper discusses motivations and design details in the challenging context of mobile multimedia streaming applications

Towards zero packet loss with LISP Mobile Node

Host mobility protocols such as Locator-Identifier Separation Protocol Mobile Node (LISP-MN) are known to experience packet loss at the point of handover. For the duration of the handover, packets sent to the MN via the old access link are dropped by the router since it has no way of knowing where the device has moved to. This affects the performance of transport layer protocols of the TCP/IP stack, which results in degradation of network performance. Buffering these packets close to the MN's new location and forwarding them to the MN on handover completion is one way of improving the overall performance of the mobility protocol. Hence, we introduce a novel network node, loc-server, to buffer these packets in order to mitigate the packet loss and reduce the service disruption time (SDT) experienced by MNs during handovers. Using a laboratory testbed implementation, LISP-MN with loc-server support shows significant reduction in packet loss and reduced SDT in comparison to vanilla LISP-MN. Similarly, performance analysis of DASH video player also shows the new architecture helps in improving the average video quality downloaded by the MN and reduces the player's instability

2022 Review of Data-Driven Plasma Science

Data-driven science and technology offer transformative tools and methods to science. This review article highlights the latest development and progress in the interdisciplinary field of data-driven plasma science (DDPS), i.e., plasma science whose progress is driven strongly by data and data analyses. Plasma is considered to be the most ubiquitous form of observable matter in the universe. Data associated with plasmas can, therefore, cover extremely large spatial and temporal scales, and often provide essential information for other scientific disciplines. Thanks to the latest technological developments, plasma experiments, observations, and computation now produce a large amount of data that can no longer be analyzed or interpreted manually. This trend now necessitates a highly sophisticated use of high-performance computers for data analyses, making artificial intelligence and machine learning vital components of DDPS. This article contains seven primary sections, in addition to the introduction and summary. Following an overview of fundamental data-driven science, five other sections cover widely studied topics of plasma science and technologies, i.e., basic plasma physics and laboratory experiments, magnetic confinement fusion, inertial confinement fusion and high-energy-density physics, space and astronomical plasmas, and plasma technologies for industrial and other applications. The final section before the summary discusses plasma-related databases that could significantly contribute to DDPS. Each primary section starts with a brief introduction to the topic, discusses the state-of-the-art developments in the use of data and/or data-scientific approaches, and presents the summary and outlook. Despite the recent impressive signs of progress, the DDPS is still in its infancy. This article attempts to offer a broad perspective on the development of this field and identify where further innovations are required

Middleware-based Database Replication: The Gaps between Theory and Practice

The need for high availability and performance in data management systems has been fueling a long running interest in database replication from both academia and industry. However, academic groups often attack replication problems in isolation, overlooking the need for completeness in their solutions, while commercial teams take a holistic approach that often misses opportunities for fundamental innovation. This has created over time a gap between academic research and industrial practice. This paper aims to characterize the gap along three axes: performance, availability, and administration. We build on our own experience developing and deploying replication systems in commercial and academic settings, as well as on a large body of prior related work. We sift through representative examples from the last decade of open-source, academic, and commercial database replication systems and combine this material with case studies from real systems deployed at Fortune 500 customers. We propose two agendas, one for academic research and one for industrial R&D, which we believe can bridge the gap within 5-10 years. This way, we hope to both motivate and help researchers in making the theory and practice of middleware-based database replication more relevant to each other.Comment: 14 pages. Appears in Proc. ACM SIGMOD International Conference on Management of Data, Vancouver, Canada, June 200

Analyse und Erweiterung eines fehler-toleranten NoC für SRAM-basierte FPGAs in Weltraumapplikationen

Data Processing Units for scientific space mission need to process ever higher volumes of data and perform ever complex calculations. But the performance of available space-qualified general purpose processors is just in the lower three digit megahertz range, which is already insufficient for some applications. As an alternative, suitable processing steps can be implemented in hardware on a space-qualified SRAM-based FPGA. However, suitable devices are susceptible against space radiation. At the Institute for Communication and Network Engineering a fault-tolerant, network-based communication architecture was developed, which enables the construction of processing chains on the basis of different processing modules within suitable SRAM-based FPGAs and allows the exchange of single processing modules during runtime, too. The communication architecture and its protocol shall isolate non SEU mitigated or just partial SEU mitigated modules affected by radiation-induced faults to prohibit the propagation of errors within the remaining System-on-Chip. In the context of an ESA study, this communication architecture was extended with further components and implemented in a representative hardware platform. Based on the acquired experiences during the study, this work analyses the actual fault-tolerance characteristics as well as weak points of this initial implementation. At appropriate locations, the communication architecture was extended with mechanisms for fault-detection and fault-differentiation as well as with a hardware-based monitoring solution. Both, the former measures and the extension of the employed hardware-platform with selective fault-injection capabilities for the emulation of radiation-induced faults within critical areas of a non SEU mitigated processing module, are used to evaluate the effects of radiation-induced faults within the communication architecture. By means of the gathered results, further measures to increase fast detection and isolation of faulty nodes are developed, selectively implemented and verified. In particular, the ability of the communication architecture to isolate network nodes without SEU mitigation could be significantly improved.Instrumentenrechner für wissenschaftliche Weltraummissionen müssen ein immer höheres Datenvolumen verarbeiten und immer komplexere Berechnungen ausführen. Die Performanz von verfügbaren qualifizierten Universalprozessoren liegt aber lediglich im unteren dreistelligen Megahertz-Bereich, was für einige Anwendungen bereits nicht mehr ausreicht. Als Alternative bietet sich die Implementierung von entsprechend geeigneten Datenverarbeitungsschritten in Hardware auf einem qualifizierten SRAM-basierten FPGA an. Geeignete Bausteine sind jedoch empfindlich gegenüber der Strahlungsumgebung im Weltraum. Am Institut für Datentechnik und Kommunikationsnetze wurde eine fehlertolerante netzwerk-basierte Kommunikationsarchitektur entwickelt, die innerhalb eines geeigneten SRAM-basierten FPGAs Datenverarbeitungsmodule miteinander nach Bedarf zu Verarbeitungsketten verbindet, sowie den Austausch von einzelnen Modulen im Betrieb ermöglicht. Nicht oder nur partiell SEU mitigierte Module sollen bei strahlungsbedingten Fehlern im Modul durch das Protokoll und die Fehlererkennungsmechanismen der Kommunikationsarchitektur isoliert werden, um ein Ausbreiten des Fehlers im restlichen System-on-Chip zu verhindern. Im Kontext einer ESA Studie wurde diese Kommunikationsarchitektur um Komponenten erweitert und auf einer repräsentativen Hardwareplattform umgesetzt. Basierend auf den gesammelten Erfahrungen aus der Studie, wird in dieser Arbeit eine Analyse der tatsächlichen Fehlertoleranz-Eigenschaften sowie der Schwachstellen dieser ursprünglichen Implementierung durchgeführt. Die Kommunikationsarchitektur wurde an geeigneten Stellen um Fehlerdetektierungs- und Fehlerunterscheidungsmöglichkeiten erweitert, sowie um eine hardwarebasierte Überwachung ergänzt. Sowohl diese Maßnahmen, als auch die Erweiterung der Hardwareplattform um gezielte Fehlerinjektions-Möglichkeiten zum Emulieren von strahlungsinduzierten Fehlern in kritischen Komponenten eines nicht SEU mitigierten Prozessierungsmoduls werden genutzt, um die tatsächlichen auftretenden Effekte in der Kommunikationsarchitektur zu evaluieren. Anhand der Ergebnisse werden weitere Verbesserungsmaßnahmen speziell zur schnellen Detektierung und Isolation von fehlerhaften Knoten erarbeitet, selektiv implementiert und verifiziert. Insbesondere die Fähigkeit, fehlerhafte, nicht SEU mitigierte Netzwerkknoten innerhalb der Kommunikationsarchitektur zu isolieren, konnte dabei deutlich verbessert werden

QoS monitoring in real-time streaming overlays based on lock-free data structures

AbstractPeer-to-peer streaming is a well-known technology for the large-scale distribution of real-time audio/video contents. Delay requirements are very strict in interactive real-time scenarios (such as synchronous distance learning), where playback lag should be of the order of seconds. Playback continuity is another key aspect in these cases: in presence of peer churning and network congestion, a peer-to-peer overlay should quickly rearrange connections among receiving nodes to avoid freezing phenomena that may compromise audio/video understanding. For this reason, we designed a QoS monitoring algorithm that quickly detects broken or congested links: each receiving node is able to independently decide whether it should switch to a secondary sending node, called "fallback node". The architecture takes advantage of a multithreaded design based on lock-free data structures, which improve the performance by avoiding synchronization among threads. We will show the good responsiveness of the proposed approach on machines with different computational capabilities: measured times prove both departures of nodes and QoS degradations are promptly detected and clients can quickly restore a stream reception. According to PSNR and SSIM, two well-known full-reference video quality metrics, QoE remains acceptable on receiving nodes of our resilient overlay also in presence of swap procedures

An improved locator identifier split architecture (ILISA) to enhance mobility

The increased use of mobile devices has prompted the need for efficient mobility management protocols to ensure continuity of communication sessions as users switch connection between available wireless access networks in an area. Locator/Identifier (LOC/ID) split architectures are designed to, among other functions, enable the mobility of nodes on the Internet. The protocols based on these architectures enable mobility by ensuring that the identifier (IP address) used for creating a communication session is maintained throughout the lifetime of the session and only the location of a mobile node (MN) is updated as the device moves. While the LOC/ID protocols ensure session continuity during handover, they experience packet loss and long service disruption times as the MN moves from one access network to another. The mobility event causes degradation of throughput, poor network utilisation, and affects the stability of some applications, such as video players. This poor performance was confirmed from the experiments we conducted on a laboratory testbed running Locator Identifier Separation Protocol MN (LISP-MN) and Mobile IPv6 (MIPv6). The MIPv6, as the standardised IETF mobility protocol, was used to benchmark the performance of LISP-MN. The poor performance recorded is owed to the design of the LISP-MN’s architecture, with no specific way of handling packets that arrive during handover events. Our main aim in this thesis is to introduce an Improved Locator/Identifier Split Architecture (ILISA) designed to enhance the mobility of nodes running a LOC/ID protocol by mitigating packet loss and reducing service disruption in handovers. A new network node, Loc-server, is central to the new architecture with the task of buffering incoming packets during handover and forwarding the packets to the MN on the completion of the node’s movement process. We implemented ILISA with LISP-MN on a laboratory testbed to evaluate its performance in different mobility scenarios. Our experimental results show a significant improvement in the mobility performance of MNs as reflected by the different network parameters investigated

Diseño centrado en calidad para la difusión Peer-to-Peer de video en vivo

El uso de redes Peer-to-Peer (P2P) es una forma escalable para ofrecer servicios de video sobre Internet. Este documento hace foco en la definición, desarrollo y evaluación de una arquitectura P2P para distribuir video en vivo. El diseño global de la red es guiado por la calidad de experiencia (Quality of Experience - QoE), cuyo principal componente en este caso es la calidad del video percibida por los usuarios finales, en lugar del tradicional diseño basado en la calidad de servicio (Quality of Service - QoE) de la mayoría de los sistemas. Para medir la calidad percibida del video, en tiempo real y automáticamente, extendimos la recientemente propuesta metodología Pseudo-Subjective Quality Assessment (PSQA). Dos grandes líneas de investigación son desarrolladas. Primero, proponemos una técnica de distribución de video desde múltiples fuentes con las características de poder ser optimizada para maximizar la calidad percibida en contextos de muchas fallas y de poseer muy baja señalización (a diferencia de los sistemas existentes). Desarrollamos una metodología, basada en PSQA, que nos permite un control fino sobre la forma en que la señal de video es dividida en partes y la cantidad de redundancia agregada, como una función de la dinámica de los usuarios de la red. De esta forma es posible mejorar la robustez del sistema tanto como sea deseado, contemplando el límite de capacidad en la comunicación. En segundo lugar, presentamos un mecanismo estructurado para controlar la topología de la red. La selección de que usuarios servirán a que otros es importante para la robustez de la red, especialmente cuando los usuarios son heterogéneos en sus capacidades y en sus tiempos de conexión.Nuestro diseño maximiza la calidad global esperada (evaluada usando PSQA), seleccionado una topología que mejora la robustez del sistema. Además estudiamos como extender la red con dos servicios complementarios: el video bajo demanda (Video on Demand - VoD) y el servicio MyTV. El desafío en estos servicios es como realizar búsquedas eficientes sobre la librería de videos, dado al alto dinamismo del contenido. Presentamos una estrategia de "caching" para las búsquedas en estos servicios, que maximiza el número total de respuestas correctas a las consultas, considerando una dinámica particular en los contenidos y restricciones de ancho de banda. Nuestro diseño global considera escenarios reales, donde los casos de prueba y los parámetros de configuración surgen de datos reales de un servicio de referencia en producción. Nuestro prototipo es completamente funcional, de uso gratuito, y basado en tecnologías bien probadas de código abierto