Implementation of a Combined OFDM-Demodulation and WCDMA-Equalization Module

For a dual-mode baseband receiver for the OFDMWireless LAN andWCDMA standards, integration of the demodulation and equalization tasks on a dedicated hardware module has been investigated. For OFDM demodulation, an FFT algorithm based on cascaded twiddle factor decomposition has been selected. This type of algorithm combines high spatial and temporal regularity in the FFT data-flow graphs with a minimal number of computations. A frequency-domain algorithm based on a circulant channel approximation has been selected for WCDMA equalization. It has good performance, low hardware complexity and a low number of computations. Its main advantage is the reuse of the FFT kernel, which contributes to the integration of both tasks. The demodulation and equalization module has been described at the register transfer level with the in-house developed Arx language. The core of the module is a pipelined radix-23 butterfly combined with a complex multiplier and complex divider. The module has an area of 0.447 mm2 in 0.18 ¿m technology and a power consumption of 10.6 mW. The proposed module compares favorably with solutions reported in literature

Channel Estimation in Multicarrier Communication Systems

The data rate and spectrum efficiency of wireless mobile communications have been significantly improved over the last decade or so. Recently, the advanced systems such as 3GPP LTE and terrestrial digital TV broadcasting have been sophisticatedly developed using OFDM and CDMA technology. In general, most mobile communication systems transmit bits of information in the radio space to the receiver. The radio channels in mobile radio systems are usually multipath fading channels, which cause inter-symbol interference (ISI) in the received signal. To remove ISI from the signal, there is a need of strong equalizer which requires knowledge on the channel impulse response (CIR).This is primarily provided by a separate channel estimator. Usually the channel estimation is based on the known sequence of bits, which is unique for a certain transmitter and which is repeated in every transmission burst. Thus, the channel estimator is able to estimate CIR for each burst separately by exploiting the known transmitted bits and the corresponding received samples. In this thesis we investigate and compare various efficient channel estimation schemes for OFDM systems which can also be extended to MC DS-CDMA systems.The channel estimation can be performed by either inserting pilot tones into all subcarriers of OFDM symbols with a specific period or inserting pilot tones into each OFDM symbol. Two major types of pilot arrangement such as block type and comb type pilot have been focused employing Least Square Error (LSE) and Minimum Mean Square Error (MMSE) channel estimators. Block type pilot sub-carriers is especially suitable for slow-fading radio channels whereas comb type pilots provide better resistance to fast fading channels. Also comb type pilot arrangement is sensitive to frequency selectivity when comparing to block type arrangement. However, there is another supervised technique called Implicit Training (IT) based channel estimation which exploits the first order statistics in the received data, induced by superimposing periodic training sequences with good correlation properties, along with the information symbols. Hence, the need for additional time slots for training the equalizer is avoided. The performance of the estimators is presented in terms of the mean square estimation error (MSEE) and bit error rate (BER)

Fast antijamming timing acquisition using multilayer synchronization sequence

Pseudonoise (PN) sequences are widely used as preamble sequences to establish timing synchronization in military wireless communication systems. At the receiver, searching and detection techniques, such as the full parallel search (FPS) and the serial search (SS), are usually adopted to acquire correct timing position. However, the synchronization sequence has to be very long to combat jamming that reduces the signal-to-noise ratio (SNR) to an extremely low level. In this adverse scenario, the FPS scheme becomes too complex to implement, whereas the SS method suffers from the drawback of long mean acquisition time (MAT). In this paper, a fast timing acquisition method is proposed, using the multilayer synchronization sequence based on cyclical codes. Specifically, the transmitted preamble is the Kronecker product of Bose–Chaudhuri-Hocquenghem (BCH) codewords and PN sequences. At the receiver, the cyclical nature of BCH codes is exploited to test only a part of the entire sequence, resulting in shorter acquisition time. The algorithm is evaluated using the metrics of MAT and detection probability (DP). Theoretical expressions of MAT and DP are derived from the constant false-alarm rate (CFAR) criterion. Theoretical analysis and simulation results show that our proposed scheme dramatically reduces the acquisition time while achieving similar DP performance and maintaining a reasonably low real-time hardware implementation complexity, in comparison with the SS schem

An FFT-based acquisition scheme for DS-CDMA systems

This paper introduces an efficient acquisition/correlation technique for DS-CDMA systems using a frequency-domain approach employing TCH-based training blocks (Tomlison, Cercas and Hughes). The classical time-domain active acquisition technique is compared with the proposed passive matched-filter type frequency domain technique. Moreover using the fact that an N-point discrete Fourier transform (DFT) can be partitioned into M smaller DFTs, we present a procedure for simultaneous decoding/despreading and synchronization that switch between 16 bit-length and 256 bit-length cyclic codes thus providing code rate variability.info:eu-repo/semantics/acceptedVersio

Broadband MC DS-CDMA Using Space-Time and Frequency-Domain Spreading

In this contribution multicarrier direct-sequence code-division multiple-access (MC DS-CDMA) using space-time spreading (STS) assisted transmit diversity and frequency-domain (F-domain) spreading is investigated in the context of broadband communications over frequency-selective Rayleigh fading channels. We consider the attainable capacity extension of broadband MC DS-CDMA with the advent of using Time-Frequency-domain (TF-domain) spreading. The BER performance of STS assisted broadband MC DS-CDMA using Binary Phase Shit Keying (BPSK) modulation and TF-domain spreading is investigated by simulation for a range of parameter values. Both the correlation based single-user detector and the decorrelating multiuser detector are considered. Our study shows that the number of users supported by the broadband MC DS-CDMA system is determined by the product of the T-domain spreading factor and the F-domain spreading factor, while it is independent of the frequency diversity order. Furthermore, when multiuser detection assisted F-domain spreading is considered, the broadband MC DS-CDMA system is capable of supporting a substantially increased number of users, while maintaining a similar bit error ratio (BER) performance to that of the broadband MC DS-CDMA system using no F-domain spreading

Generalized discrete Fourier transform with non-linear phase : theory and design

Constant modulus transforms like discrete Fourier transform (DFT), Walsh transform, and Gold codes have been successfully used over several decades in various engineering applications, including discrete multi-tone (DMT), orthogonal frequency division multiplexing (OFDM) and code division multiple access (CDMA) communications systems. Among these popular transforms, DFT is a linear phase transform and widely used in multicarrier communications due to its performance and fast algorithms. In this thesis, a theoretical framework for Generalized DFT (GDFT) with nonlinear phase exploiting the phase space is developed. It is shown that GDFT offers sizable correlation improvements over DFT, Walsh, and Gold codes. Brute force search algorithm is employed to obtain orthogonal GDFT code sets with improved correlations. Design examples and simulation results on several channel types presented in the thesis show that the proposed GDFT codes, with better auto and cross-correlation properties than DFT, lead to better bit-error-rate performance in all multi-carrier and multi-user communications scenarios investigated. It is also highlighted how known constant modulus code families such as Walsh, Walsh-like and other codes are special solutions of the GDFT framework. In addition to theoretical framework, practical design methods with computationally efficient implementations of GDFT as enhancements to DFT are presented in the thesis. The main advantage of the proposed method is its ability to design a wide selection of constant modulus orthogonal code sets based on the desired performance metrics mimicking the engineering .specs of interest. Orthogonal Frequency Division Multiplexing (OFDM) is a leading candidate to be adopted for high speed 4G wireless communications standards due to its high spectral efficiency, strong resistance to multipath fading and ease of implementation with Fast Fourier Transform (FFT) algorithms. However, the main disadvantage of an OFDM based communications technique is of its high PAPR at the RF stage of a transmitter. PAPR dominates the power (battery) efficiency of the radio transceiver. Among the PAPR reduction methods proposed in the literature, Selected Mapping (SLM) method has been successfully used in OFDM communications. In this thesis, an SLM method employing GDFT with closed form phase functions rather than fixed DFT for PAPR reduction is introduced. The performance improvements of GDFT based SLM PAPR reduction for various OFDM communications scenarios including the WiMAX standard based system are evaluated by simulations. Moreover, an efficient implementation of GDFT based SLM method reducing computational cost of multiple transform operations is forwarded. Performance simulation results show that power efficiency of non-linear RF amplifier in an OFDM system employing proposed method significantly improved

MC-DS-CDMA System based on DWT and STBC in ITU Multipath Fading Channels Model

 في هذه الورقة، تم تحسين أداء النفوذ المتعدد بالتقسيم لرمز السلسلة المباشر متعدد الموجات (MC-DS-CDMA) في تطبيقات MC-DS-CDMA الثابتة والتطبيقات MC-DS-CDMA  المتنقلة باستعمال تعويضات التشفير الزمنية الفضائية وتحويل فورير السريعة المنفصلة (FFT) أو تحويل المويجات المنفصلة DWT. وقد تمت محاكاة أنظمة MC-DS-CDMA  باستخدام ماتلاب 2015a. من خلال محاكاة النظام المقترح، يمكن تغيير المعالم المختلفة واختبارها. ويتم الحصول على معدل خطأ البيانات (BER) لهذه الأنظمة على مدى واسع من نسبة الإشارة إلى الضوضاء. وقد قورنت جميع نتائج المحاكاة مع بعضها البعض باستخدام حجم الموجة الحاملة الفرعية المختلفة FFT أو DWT مع ل STBC 1،2،3 و 4 هوائيات في المرسل وفي مختلف قنوات الخبو في متعددة الممرات ITU ومختلف ترددات دوبلر (fd).In this paper, the performance of multicarrier direct sequence code division multiple access (MC-DS-CDMA) in fixed MC-DS-CDMA and Mobile MC-DS-CDMA applications have been improved by using the compensations of space time block coding and Discrete Fast Fourier transforms (FFT) or Discrete Wavelets transform DWT. These MC-DS-CDMA systems had been simulated using MATLAB 2015a. Through simulation of the proposed system, various parameters can be changed and tested. The Bit Error Rate (BERs) of these systems are obtained over wide range of signal to noise ratio. All simulation results had been compared with each other using different subcarrier size of FFT or DWT with STBC for 1,2,3 and 4 antennas in transmitter and under different ITU multipath fading channels and different Doppler frequencies (fd). The proposed structures of STBC-MC-DS-CDMA system based on (DWT) batter than based on (FFT) in varies Doppler frequencies and subcarrier size. Also, proposed system with STBC based on 4 transmitters better than other systems based on 1 or 2 or 3 transmitters in all Doppler frequencies and subcarrier size in all simulation results