Low complexity video compression using moving edge detection based on DCT coefficients

In this paper, we propose a new low complexity video compression method based on detecting blocks containing moving edges us- ing only DCT coe±cients. The detection, whilst being very e±cient, also allows e±cient motion estimation by constraining the search process to moving macro-blocks only. The encoders PSNR is degraded by 2dB com- pared to H.264/AVC inter for such scenarios, whilst requiring only 5% of the execution time. The computational complexity of our approach is comparable to that of the DISCOVER codec which is the state of the art low complexity distributed video coding. The proposed method ¯nds blocks with moving edge blocks and processes only selected blocks. The approach is particularly suited to surveillance type scenarios with a static camera

Compression vidéo basée sur l'exploitation d'un décodeur intelligent

This Ph.D. thesis studies the novel concept of Smart Decoder (SDec) where the decoder is given the ability to simulate the encoder and is able to conduct the R-D competition similarly as in the encoder. The proposed technique aims to reduce the signaling of competing coding modes and parameters. The general SDec coding scheme and several practical applications are proposed, followed by a long-term approach exploiting machine learning concept in video coding. The SDec coding scheme exploits a complex decoder able to reproduce the choice of the encoder based on causal references, eliminating thus the need to signal coding modes and associated parameters. Several practical applications of the general outline of the SDec scheme are tested, using different coding modes during the competition on the reference blocs. Despite the choice for the SDec reference block being still simple and limited, interesting gains are observed. The long-term research presents an innovative method that further makes use of the processing capacity of the decoder. Machine learning techniques are exploited in video coding with the purpose of reducing the signaling overhead. Practical applications are given, using a classifier based on support vector machine to predict coding modes of a block. The block classification uses causal descriptors which consist of different types of histograms. Significant bit rate savings are obtained, which confirms the potential of the approach.Cette thèse de doctorat étudie le nouveau concept de décodeur intelligent (SDec) dans lequel le décodeur est doté de la possibilité de simuler l’encodeur et est capable de mener la compétition R-D de la même manière qu’au niveau de l’encodeur. Cette technique vise à réduire la signalisation des modes et des paramètres de codage en compétition. Le schéma général de codage SDec ainsi que plusieurs applications pratiques sont proposées, suivis d’une approche en amont qui exploite l’apprentissage automatique pour le codage vidéo. Le schéma de codage SDec exploite un décodeur complexe capable de reproduire le choix de l’encodeur calculé sur des blocs de référence causaux, éliminant ainsi la nécessité de signaler les modes de codage et les paramètres associés. Plusieurs applications pratiques du schéma SDec sont testées, en utilisant différents modes de codage lors de la compétition sur les blocs de référence. Malgré un choix encore simple et limité des blocs de référence, les gains intéressants sont observés. La recherche en amont présente une méthode innovante qui permet d’exploiter davantage la capacité de traitement d’un décodeur. Les techniques d’apprentissage automatique sont exploitées pour but de réduire la signalisation. Les applications pratiques sont données, utilisant un classificateur basé sur les machines à vecteurs de support pour prédire les modes de codage d’un bloc. La classification des blocs utilise des descripteurs causaux qui sont formés à partir de différents types d’histogrammes. Des gains significatifs en débit sont obtenus, confirmant ainsi le potentiel de l’approche

Efficient HEVC-based video adaptation using transcoding

In a video transmission system, it is important to take into account the great diversity of the network/end-user constraints. On the one hand, video content is typically streamed over a network that is characterized by different bandwidth capacities. In many cases, the bandwidth is insufficient to transfer the video at its original quality. On the other hand, a single video is often played by multiple devices like PCs, laptops, and cell phones. Obviously, a single video would not satisfy their different constraints. These diversities of the network and devices capacity lead to the need for video adaptation techniques, e.g., a reduction of the bit rate or spatial resolution. Video transcoding, which modifies a property of the video without the change of the coding format, has been well-known as an efficient adaptation solution. However, this approach comes along with a high computational complexity, resulting in huge energy consumption in the network and possibly network latency. This presentation provides several optimization strategies for the transcoding process of HEVC (the latest High Efficiency Video Coding standard) video streams. First, the computational complexity of a bit rate transcoder (transrater) is reduced. We proposed several techniques to speed-up the encoder of a transrater, notably a machine-learning-based approach and a novel coding-mode evaluation strategy have been proposed. Moreover, the motion estimation process of the encoder has been optimized with the use of decision theory and the proposed fast search patterns. Second, the issues and challenges of a spatial transcoder have been solved by using machine-learning algorithms. Thanks to their great performance, the proposed techniques are expected to significantly help HEVC gain popularity in a wide range of modern multimedia applications

Content-adaptive feature-based CU size prediction for fast low-delay video encoding in HEVC

Determining the best partitioning structure of a Coding Tree Unit (CTU) is one of the most time consuming operations in HEVC encoding. Specifically, it is the evaluation of the quadtree hierarchy using the Rate-Distortion (RD) optimization that has the most significant impact on the encoding time, especially in the cases of High Definition (HD) and Ultra High Definition (UHD) videos. In order to expedite the encoding for low delay applications, this paper proposes a Coding Unit (CU) size selection and encoding algorithm for inter-prediction in the HEVC. To this end, it describes (i) two CU classification models based on Inter N×N mode motion features and RD cost thresholds to predict the CU split decision, (ii) an online training scheme for dynamic content adaptation, (iii) a motion vector reuse mechanism to expedite the motion estimation process, and finally introduces (iv) a computational complexity to coding efficiency trade-off process to enable flexible control of the algorithm. The experimental results reveal that the proposed algorithm achieves a consistent average encoding time performance ranging from 55% - 58% and 57%-61% with average Bjøntegaard Delta Bit Rate (BDBR) increases of 1.93% – 2.26% and 2.14% – 2.33% compared to the HEVC 16.0 reference software for the low delay P and low delay B configurations, respectively, across a wide range of content types and bit rates

Algorithms and methods for video transcoding.

Video transcoding is the process of dynamic video adaptation. Dynamic video adaptation can be defined as the process of converting video from one format to another, changing the bit rate, frame rate or resolution of the encoded video, which is mainly necessitated by the end user requirements. H.264 has been the predominantly used video compression standard for the last 15 years. HEVC (High Efficiency Video Coding) is the latest video compression standard finalised in 2013, which is an improvement over H.264 video compression standard. HEVC performs significantly better than H.264 in terms of the Rate-Distortion performance. As H.264 has been widely used in the last decade, a large amount of video content exists in H.264 format. There is a need to convert H.264 video content to HEVC format to achieve better Rate-Distortion performance and to support legacy video formats on newer devices. However, the computational complexity of HEVC encoder is 2-10 times higher than that of H.264 encoder. This makes it necessary to develop low complexity video transcoding algorithms to transcode from H.264 to HEVC format. This research work proposes low complexity algorithms for H.264 to HEVC video transcoding. The proposed algorithms reduce the computational complexity of H.264 to HEVC video transcoding significantly, with negligible loss in Rate-Distortion performance. This work proposes three different video transcoding algorithms. The MV-based mode merge algorithm uses the block mode and MV variances to estimate the split/non-split decision as part of the HEVC block prediction process. The conditional probability-based mode mapping algorithm models HEVC blocks of sizes 16×16 and lower as a function of H.264 block modes, H.264 and HEVC Quantisation Parameters (QP). The motion-compensated MB residual-based mode mapping algorithm makes the split/non-split decision based on content-adaptive classification models. With a combination of the proposed set of algorithms, the computational complexity of the HEVC encoder is reduced by around 60%, with negligible loss in Rate-Distortion performance, outperforming existing state-of-art algorithms by 20-25% in terms of computational complexity. The proposed algorithms can be used in computation-constrained video transcoding applications, to support video format conversion in smart devices, migration of large-scale H.264 video content from host servers to HEVC, cloud computing-based transcoding applications, and also to support high quality videos over bandwidth-constrained networks

Automatic fine-grained area detection for thin client systems

A

Intelligent Side Information Generation in Distributed Video Coding

Distributed video coding (DVC) reverses the traditional coding paradigm of complex encoders allied with basic decoding to one where the computational cost is largely incurred by the decoder. This is attractive as the proven theoretical work of Wyner-Ziv (WZ) and Slepian-Wolf (SW) shows that the performance by such a system should be exactly the same as a conventional coder. Despite the solid theoretical foundations, current DVC qualitative and quantitative performance falls short of existing conventional coders and there remain crucial limitations. A key constraint governing DVC performance is the quality of side information (SI), a coarse representation of original video frames which are not available at the decoder. Techniques to generate SI have usually been based on linear motion compensated temporal interpolation (LMCTI), though these do not always produce satisfactory SI quality, especially in sequences exhibiting non-linear motion. This thesis presents an intelligent higher order piecewise trajectory temporal interpolation (HOPTTI) framework for SI generation with original contributions that afford better SI quality in comparison to existing LMCTI-based approaches. The major elements in this framework are: (i) a cubic trajectory interpolation algorithm model that significantly improves the accuracy of motion vector estimations; (ii) an adaptive overlapped block motion compensation (AOBMC) model which reduces both blocking and overlapping artefacts in the SI emanating from the block matching algorithm; (iii) the development of an empirical mode switching algorithm; and (iv) an intelligent switching mechanism to construct SI by automatically selecting the best macroblock from the intermediate SI generated by HOPTTI and AOBMC algorithms. Rigorous analysis and evaluation confirms that significant quantitative and perceptual improvements in SI quality are achieved with the new framework