81 research outputs found
Handover management in mobile WiMAX using adaptive cross-layer technique
The protocol type and the base station (BS) technology are the main communication media between the Vehicle to Infrastructure (V2I) communication in vehicular networks. During high speed vehicle movement, the best communication would be with a seamless handover (HO) delay in terms of lower packet loss and throughput. Many studies have focused on how to reduce the HO delay during lower speeds of the vehicle with data link (L2) and network (L3) layers protocol. However, this research studied the Transport Layer (L4) protocol mobile Stream Control Transmission Protocol (mSCTP) used as an optimal protocol in collaboration with the Location Manager (LM) and Domain Name Server (DNS). In addition, the BS technology that performs smooth HO employing an adaptive algorithm in L2 to perform the HO according to current vehicle speed was also included in the research. The methods derived from the combination of L4 and the BS technology methods produced an Adaptive Cross-Layer (ACL) design which is a mobility oriented handover management scheme that adapts the HO procedure among the protocol layers. The optimization has a better performance during HO as it is reduces scanning delay and diversity level as well as support transparent mobility among layers in terms of low packet loss and higher throughput. All of these metrics are capable of offering maximum flexibility and efficiency while allowing applications to refine the behaviour of the HO procedure. Besides that, evaluations were performed in various scenarios including different vehicle speeds and background traffic. The performance evaluation of the proposed ACL had approximately 30% improvement making it better than the other handover solutions
Handover analysis over mobile WiMAX technology.
As new mobile devices and mobile applications continue to growth, so does the data traffic demand for broadband services access and the user needs toward mobility, thereby, wireless application became today the fastest solution and lowest cost implementation unlike traditional wired deployment such as optical fibers and digital lines. WiMAX technology satisfies this gap through its high network performance over the air interface and high data rates based on the IEEE 802.16-2004 standards, this original specification does not support mobility.
Therefore, the IEEE introduces a new standard that enables mobility profiles under 802.16e-2005, from which three different types of handovers process are introduced as hard handover (HHO), macro diversity handover (MDHO) and fast base station switching (FBSS) handover.
The objective of this master thesis is to analyze how the handover process affects network performance. The analysis propose three scenarios, built over OPNET simulator to measure the most critical wireless parameter and performance indicator such as throughput, handover success rate, packet drop, delay and network usage.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format
Handover in a mobile wireless communication network –A Review Phase
Mobility is the features of mobile communication that makes it desirable by all and varied. The whole world is now attractive in wireless communication as it provides users' ability to communicate on-the-go. IT is accomplished by transferring users from a radio network to another. This process is called handover. Handover occurs by adjusting the duration of soft handovers, the size of the areas and either by cell crossing or by deterioration in the signal quality of the current channel — the brief overview of handover, Handover in WiMAX and LTE, types of handover, handover types solutions, usually used handover parameters, some methods employed in the literature and I contemporary the convergent fact for continuance in the area of mobile wireless communication Handover
Performance Optimization of WiMAX Mobile Networks with a Predictive Handover Process
Worldwide Interoperability for Microwave Access (WiMAX) is one of the most promising technologies for the next generation networks as it provides high data rates at medium and long range with full support of mobility. The technology is based on IEEE 802.16 standards and amendments specifying the MAC and PHY layers for fixed, nomadic, portable and mobile access. High speed mobility scenarios require low delay handover so as not to degrade end-to-end QoS indicators, such as delay time or data loss, that are significantly more affected. The WiMAX Forum Network Working Group aims to provide methods for controlled transition of the MS between BSs without significant loss of data or decreased QoS. It has been observed that prediction-based methods reduce handover latency and by the way the packets loss rate. In this paper we use the linear regression model to build a predictive hard handover algorithm that predict the Received Signal Strength Indicator (RSSI) value and advertize the MS to trigger the scanning procedure and the handover process operations reducing so the total handover latency and packets loss rate. The numerical analysis and simulation results show that the proposed method significantly reduces the handover latency and the packets loss rate
Recommended from our members
Design of interface selection protocols for multi-homed wireless networks
This thesis was submitted for the degree of Doctor of Philosophy and was awarded by Brunel University on 10 December 2010.The IEEE 802.11/802.16 standards conformant wireless communication stations have multi-homing transmission capability. To achieve greater communication efficiency, multi-homing capable stations use handover mechanism to select appropriate transmission channel according to variations in the channel quality. This thesis presents three internal-linked handover schemes, (1) Interface Selection Protocol (ISP), belonging to Wireless Local Area Network (WLAN)- Worldwide Interoperability for Microwave Access (WiMAX) environment (2) Fast Channel Scanning (FCS) and (3) Traffic Manager (TM), (2) and (3) belonging to WiMAX Environment. The proposed schemes in this thesis use a novel mechanism of providing a reliable communication route. This solution is based on a cross-layer communication framework, where the interface selection module uses various network related parameters from Medium Access Control (MAC) sub-layer/Physical Layer (PHY) across the protocol suite for decision making at the Network layer. The proposed solutions are highly responsive when compared with existing multi-homed schemes; responsiveness is one of the key factors in the design of such protocols. Selected route under these schemes is based on the most up to date link-layer information. Therefore, such a route is not only reliable in terms of route optimization but it also fulfils the application demands in terms of throughput and delay. Design of ISP protocol use probing frames during the route discovery process. The 802.11 mandates the use of different rates for data transmission frames. The ISP-metric can be incorporated into various routing aspects and its applicability is determined by the possibility of provision of MAC dependent parameters that are used to determine the best path metric values. In many cases, higher device density, interference and mobility cause variable medium access delays. It causes creation of ‘unreachable zones’, where destination is marked as unreachable. However, by use of the best path metric, the destination has been made reachable, anytime and anywhere, because of the intelligent use of the probing frames and interface selection algorithm implemented. The IEEE 802.16e introduces several MAC level queues for different access categories, maintaining service requirement within these queues; which imply that frames from a higher priority queue, i.e. video frames, are serviced more frequently than those belonging to lower priority queues. Such an enhancement at the MAC sub-layer introduces uneven queuing delays. Conventional routing protocols are unaware of such MAC specific constraints and as a result, these factors are not considered which result in channel performance degradation. To meet such challenges, the thesis presents FCS and TM schemes for WiMAX. For FCS, Its solution is to improve the mobile WiMAX handover and address the scanning latency. Since minimum scanning time is the most important issue in the handover process. This handover scheme aims to utilize the channel efficiently and apply such a procedure to reduce the time it takes to scan the neighboring access stations. TM uses MAC and physical layer (PHY) specific information in the interface metric and maintains a separate path to destination by applying an alternative interface operation. Simulation tests and comparisons with existing multi-homed protocols and handover schemes demonstrate the effectiveness of incorporating the medium dependent parameters. Moreover, show that suggested schemes, have shown better performance in terms of end-to-end delay and throughput, with efficiency up to 40% in specific test scenarios
Mobility and Handoff Management in Wireless Networks
With the increasing demands for new data and real-time services, wireless
networks should support calls with different traffic characteristics and
different Quality of Service (QoS)guarantees. In addition, various wireless
technologies and networks exist currently that can satisfy different needs and
requirements of mobile users. Since these different wireless networks act as
complementary to each other in terms of their capabilities and suitability for
different applications, integration of these networks will enable the mobile
users to be always connected to the best available access network depending on
their requirements. This integration of heterogeneous networks will, however,
lead to heterogeneities in access technologies and network protocols. To meet
the requirements of mobile users under this heterogeneous environment, a common
infrastructure to interconnect multiple access networks will be needed. In this
chapter, the design issues of a number of mobility management schemes have been
presented. Each of these schemes utilizes IP-based technologies to enable
efficient roaming in heterogeneous network. Efficient handoff mechanisms are
essential for ensuring seamless connectivity and uninterrupted service
delivery. A number of handoff schemes in a heterogeneous networking environment
are also presented in this chapter.Comment: 28 pages, 11 figure
Energy-efficient vertical handover parameters, classification and solutions over wireless heterogeneous networks: a comprehensive survey
In the last few decades, the popularity of wireless networks has been growing dramatically for both home and business networking. Nowadays, smart mobile devices equipped with various wireless networking interfaces are used to access the Internet, communicate, socialize and handle short or long-term businesses. As these devices rely on their limited batteries, energy-efficiency has become one of the major issues in both academia and industry. Due to terminal mobility, the variety of radio access technologies and the necessity of connecting to the Internet anytime and anywhere, energy-efficient handover process within the wireless heterogeneous networks has sparked remarkable attention in recent years. In this context, this paper first addresses the impact of specific information (local, network-assisted, QoS-related, user preferences, etc.) received remotely or locally on the energy efficiency as well as the impact of vertical handover phases, and methods. It presents energy-centric state-of-the-art vertical handover approaches and their impact on energy efficiency. The paper also discusses the recommendations on possible energy gains at different stages of the vertical handover process
Energy-efficient vertical handover parameters, classification and solutions over wireless heterogeneous networks: a comprehensive survey
In the last few decades, the popularity of wireless networks has been growing dramatically for both home and business networking. Nowadays, smart mobile devices equipped with various wireless networking interfaces are used to access the Internet, communicate, socialize and handle short or long-term businesses. As these devices rely on their limited batteries, energy-efficiency has become one of the major issues in both academia and industry. Due to terminal mobility, the variety of radio access technologies and the necessity of connecting to the Internet anytime and anywhere, energy-efficient handover process within the wireless heterogeneous networks has sparked remarkable attention in recent years. In this context, this paper first addresses the impact of specific information (local, network-assisted, QoS-related, user preferences, etc.) received remotely or locally on the energy efficiency as well as the impact of vertical handover phases, and methods. It presents energy-centric state-of-the-art vertical handover approaches and their impact on energy efficiency. The paper also discusses the recommendations on possible energy gains at different stages of the vertical handover process
- …