High-Performance Placement and Routing for the Nanometer Scale.

Modern semiconductor manufacturing facilitates single-chip electronic systems that only five years ago required ten to twenty chips. Naturally, design complexity has grown within this period. In contrast to this growth, it is becoming common in the industry to limit design team size which places a heavier burden on design automation tools. Our work identifies new objectives, constraints and concerns in the physical design of systems-on-chip, and develops new computational techniques to address them. In addition to faster and more relevant design optimizations, we demonstrate that traditional design flows based on ``separation of concerns'' produce unnecessarily suboptimal layouts. We develop new integrated optimizations that streamline traditional chains of loosely-linked design tools. In particular, we bridge the gap between mixed-size placement and routing by updating the objective of global and detail placement to a more accurate estimate of routed wirelength. To this we add sophisticated whitespace allocation, and the combination provides increased routability, faster routing, shorter routed wirelength, and the best via counts of published techniques. To further improve post-routing design metrics, we present new global routing techniques based on Discrete Lagrange Multipliers (DLM) which produce the best routed wirelength results on recent benchmarks. Our work culminates in the integration of our routing techniques within an incremental placement flow to improve detailed routing solutions, shrink die sizes and reduce total chip cost. Not only do our techniques improve the quality and cost of designs, but also simplify design automation software implementation in many cases. Ultimately, we reduce the time needed for design closure through improved tool fidelity and the use of our incremental techniques for placement and routing.Ph.D.Computer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/64639/1/royj_1.pd

Floorplan-guided placement for large-scale mixed-size designs

In the nanometer scale era, placement has become an extremely challenging stage in modern Very-Large-Scale Integration (VLSI) designs. Millions of objects need to be placed legally within a chip region, while both the interconnection and object distribution have to be optimized simultaneously. Due to the extensive use of Intellectual Property (IP) and embedded memory blocks, a design usually contains tens or even hundreds of big macros. A design with big movable macros and numerous standard cells is known as mixed-size design. Due to the big size difference between big macros and standard cells, the placement of mixed-size designs is much more difficult than the standard-cell placement. This work presents an efficient and high-quality placement tool to handle modern large-scale mixed-size designs. This tool is developed based on a new placement algorithm flow. The main idea is to use the fixed-outline floorplanning algorithm to guide the state-of-the-art analytical placer. This new flow consists of four steps: 1) The objects in the original netlist are clustered into blocks; 2) Floorplanning is performed on the blocks; 3) The blocks are shifted within the chip region to further optimize the wirelength; 4) With big macro locations fixed, incremental placement is applied to place the remaining objects. Several key techniques are proposed to be used in the first two steps. These techniques are mainly focused on the following two aspects: 1) Hypergraph clustering algorithm that can cut down the original problem size without loss of placement Quality of Results (QoR); 2) Fixed-outline floorplanning algorithm that can provide a good guidance to the analytical placer at the global level. The effectiveness of each key technique is demonstrated by promising experimental results compared with the state-of-the-art algorithms. Moreover, using the industrial mixed-size designs, the new placement tool shows better performance than other existing approaches

Algorithmic techniques for physical design : macro placement and under-the-cell routing

With the increase of chip component density and new manufacturability constraints imposed by modern technology nodes, the role of algorithms for electronic design automation is key to the successful implementation of integrated circuits. Two of the critical steps in the physical design flows are macro placement and ensuring all design rules are honored after timing closure. This thesis proposes contributions to help in these stages, easing time-consuming manual steps and helping physical design engineers to obtain better layouts in reduced turnaround time. The first contribution is under-the-cell routing, a proposal to systematically connect standard cell components via lateral pins in the lower metal layers. The aim is to reduce congestion in the upper metal layers caused by extra metal and vias, decreasing the number of design rule violations. To allow cells to connect by abutment, a standard cell library is enriched with instances containing lateral pins in a pre-selected sharing track. Algorithms are proposed to maximize the numbers of connections via lateral connection by mapping placed cell instances to layouts with lateral pins, and proposing local placement modifications to increase the opportunities for such connections. Experimental results show a significant decrease in the number of pins, vias, and in number of design rule violations, with negligible impact on wirelength and timing. The second contribution, done in collaboration with eSilicon (a leading ASIC design company), is the creation of HiDaP, a macro placement tool for modern industrial designs. The proposed approach follows a multilevel scheme to floorplan hierarchical blocks, composed of macros and standard cells. By exploiting RTL information available in the netlist, the dataflow affinity between these blocks is modeled and minimized to find a macro placement with good wirelength and timing properties. The approach is further extended to allow additional engineer input, such as preferred macro locations, and also spectral and force methods to guide the floorplanning search. Experimental results show that the layouts generated by HiDaP outperforms those obtained by a state-of-the-art EDA physical design software, with similar wirelength and better timing when compared to manually designed tape-out ready macro placements. Layouts obtained by HiDaP have successfully been brought to near timing closure with one to two rounds of small modifications by physical design engineers. HiDaP has been fully integrated in the design flows of the company and its development remains an ongoing effort.A causa de l'increment de la densitat de components en els xip i les noves restriccions de disseny imposades pels últims nodes de fabricació, el rol de l'algorísmia en l'automatització del disseny electrònic ha esdevingut clau per poder implementar circuits integrats. Dos dels passos crucials en el procés de disseny físic és el placement de macros i assegurar la correcció de les regles de disseny un cop les restriccions de timing del circuit són satisfetes. Aquesta tesi proposa contribucions per ajudar en aquests dos reptes, facilitant laboriosos passos manuals en el procés i ajudant als enginyers de disseny físic a obtenir millors resultats en menys temps. La primera contribució és el routing "under-the-cell", una proposta per connectar cel·les estàndard usant pins laterals en les capes de metall inferior de manera sistemàtica. L'objectiu és reduir la congestió en les capes de metall superior causades per l'ús de metall i vies, i així disminuir el nombre de violacions de regles de disseny. Per permetre la connexió lateral de cel·les, estenem una llibreria de cel·les estàndard amb dissenys que incorporen connexions laterals. També proposem modificacions locals al placement per permetre explotar aquest tipus de connexions més sovint. Els resultats experimentals mostren una reducció significativa en el nombre de pins, vies i nombre de violacions de regles de disseny, amb un impacte negligible en wirelength i timing. La segona contribució, desenvolupada en col·laboració amb eSilicon (una empresa capdavantera en disseny ASIC), és el desenvolupament de HiDaP, una eina de macro placement per a dissenys industrials actuals. La proposta segueix un procés multinivell per fer el floorplan de blocks jeràrquics, formats per macros i cel·les estàndard. Mitjançant la informació RTL disponible en la netlist, l'afinitat de dataflow entre els mòduls es modela i minimitza per trobar macro placements amb bones propietats de wirelength i timing. La proposta també incorpora la possibilitat de rebre input addicional de l'enginyer, com ara suggeriments de les posicions de les macros. Finalment, també usa mètodes espectrals i de forçes per guiar la cerca de floorplans. Els resultats experimentals mostren que els dissenys generats amb HiDaP són millors que els obtinguts per eines comercials capdavanteres de EDA. Els resultats també mostren que els dissenys presentats poden obtenir un wirelength similar i millor timing que macro placements obtinguts manualment, usats per fabricació. Alguns dissenys obtinguts per HiDaP s'han dut fins a timing-closure en una o dues rondes de modificacions incrementals per part d'enginyers de disseny físic. L'eina s'ha integrat en el procés de disseny de eSilicon i el seu desenvolupament continua més enllà de les aportacions a aquesta tesi

Algorithmic techniques for physical design : macro placement and under-the-cell routing

With the increase of chip component density and new manufacturability constraints imposed by modern technology nodes, the role of algorithms for electronic design automation is key to the successful implementation of integrated circuits. Two of the critical steps in the physical design flows are macro placement and ensuring all design rules are honored after timing closure. This thesis proposes contributions to help in these stages, easing time-consuming manual steps and helping physical design engineers to obtain better layouts in reduced turnaround time. The first contribution is under-the-cell routing, a proposal to systematically connect standard cell components via lateral pins in the lower metal layers. The aim is to reduce congestion in the upper metal layers caused by extra metal and vias, decreasing the number of design rule violations. To allow cells to connect by abutment, a standard cell library is enriched with instances containing lateral pins in a pre-selected sharing track. Algorithms are proposed to maximize the numbers of connections via lateral connection by mapping placed cell instances to layouts with lateral pins, and proposing local placement modifications to increase the opportunities for such connections. Experimental results show a significant decrease in the number of pins, vias, and in number of design rule violations, with negligible impact on wirelength and timing. The second contribution, done in collaboration with eSilicon (a leading ASIC design company), is the creation of HiDaP, a macro placement tool for modern industrial designs. The proposed approach follows a multilevel scheme to floorplan hierarchical blocks, composed of macros and standard cells. By exploiting RTL information available in the netlist, the dataflow affinity between these blocks is modeled and minimized to find a macro placement with good wirelength and timing properties. The approach is further extended to allow additional engineer input, such as preferred macro locations, and also spectral and force methods to guide the floorplanning search. Experimental results show that the layouts generated by HiDaP outperforms those obtained by a state-of-the-art EDA physical design software, with similar wirelength and better timing when compared to manually designed tape-out ready macro placements. Layouts obtained by HiDaP have successfully been brought to near timing closure with one to two rounds of small modifications by physical design engineers. HiDaP has been fully integrated in the design flows of the company and its development remains an ongoing effort.A causa de l'increment de la densitat de components en els xip i les noves restriccions de disseny imposades pels últims nodes de fabricació, el rol de l'algorísmia en l'automatització del disseny electrònic ha esdevingut clau per poder implementar circuits integrats. Dos dels passos crucials en el procés de disseny físic és el placement de macros i assegurar la correcció de les regles de disseny un cop les restriccions de timing del circuit són satisfetes. Aquesta tesi proposa contribucions per ajudar en aquests dos reptes, facilitant laboriosos passos manuals en el procés i ajudant als enginyers de disseny físic a obtenir millors resultats en menys temps. La primera contribució és el routing "under-the-cell", una proposta per connectar cel·les estàndard usant pins laterals en les capes de metall inferior de manera sistemàtica. L'objectiu és reduir la congestió en les capes de metall superior causades per l'ús de metall i vies, i així disminuir el nombre de violacions de regles de disseny. Per permetre la connexió lateral de cel·les, estenem una llibreria de cel·les estàndard amb dissenys que incorporen connexions laterals. També proposem modificacions locals al placement per permetre explotar aquest tipus de connexions més sovint. Els resultats experimentals mostren una reducció significativa en el nombre de pins, vies i nombre de violacions de regles de disseny, amb un impacte negligible en wirelength i timing. La segona contribució, desenvolupada en col·laboració amb eSilicon (una empresa capdavantera en disseny ASIC), és el desenvolupament de HiDaP, una eina de macro placement per a dissenys industrials actuals. La proposta segueix un procés multinivell per fer el floorplan de blocks jeràrquics, formats per macros i cel·les estàndard. Mitjançant la informació RTL disponible en la netlist, l'afinitat de dataflow entre els mòduls es modela i minimitza per trobar macro placements amb bones propietats de wirelength i timing. La proposta també incorpora la possibilitat de rebre input addicional de l'enginyer, com ara suggeriments de les posicions de les macros. Finalment, també usa mètodes espectrals i de forçes per guiar la cerca de floorplans. Els resultats experimentals mostren que els dissenys generats amb HiDaP són millors que els obtinguts per eines comercials capdavanteres de EDA. Els resultats també mostren que els dissenys presentats poden obtenir un wirelength similar i millor timing que macro placements obtinguts manualment, usats per fabricació. Alguns dissenys obtinguts per HiDaP s'han dut fins a timing-closure en una o dues rondes de modificacions incrementals per part d'enginyers de disseny físic. L'eina s'ha integrat en el procés de disseny de eSilicon i el seu desenvolupament continua més enllà de les aportacions a aquesta tesi.Postprint (published version

Clock routing for high performance microprocessor designs.

Tian, Haitong.Chinese abstract is on unnumbered page.Thesis (M.Phil.)--Chinese University of Hong Kong, 2011.Includes bibliographical references (p. 65-74).Abstracts in English and Chinese.Abstract --- p.iAcknowledgement --- p.iiiChapter 1 --- Introduction --- p.1Chapter 1.1 --- Motivations --- p.1Chapter 1.2 --- Our Contributions --- p.2Chapter 1.3 --- Organization of the Thesis --- p.3Chapter 2 --- Background Study --- p.4Chapter 2.1 --- Traditional Clock Routing Problem --- p.4Chapter 2.2 --- Tree-Based Clock Routing Algorithms --- p.5Chapter 2.2.1 --- Clock Routing Using H-tree --- p.5Chapter 2.2.2 --- Method of Means and Medians(MMM) --- p.6Chapter 2.2.3 --- Geometric Matching Algorithm (GMA) --- p.8Chapter 2.2.4 --- Exact Zero-Skew Algorithm --- p.9Chapter 2.2.5 --- Deferred Merge Embedding (DME) --- p.10Chapter 2.2.6 --- Boundary Merging and Embedding (BME) Algorithm --- p.14Chapter 2.2.7 --- Planar Clock Routing Algorithm --- p.17Chapter 2.2.8 --- Useful-skew Tree Algorithm --- p.18Chapter 2.3 --- Non-Tree Clock Distribution Networks --- p.19Chapter 2.3.1 --- Grid (Mesh) Structure --- p.20Chapter 2.3.2 --- Spine Structure --- p.20Chapter 2.3.3 --- Hybrid Structure --- p.21Chapter 2.4 --- Post-grid Clock Routing Problem --- p.22Chapter 2.5 --- Limitations of the Previous Work --- p.24Chapter 3 --- Post-Grid Clock Routing Problem --- p.26Chapter 3.1 --- Introduction --- p.26Chapter 3.2 --- Problem Definition --- p.27Chapter 3.3 --- Our Approach --- p.30Chapter 3.3.1 --- Delay-driven Path Expansion Algorithm --- p.31Chapter 3.3.2 --- Pre-processing to Connect Critical ports --- p.34Chapter 3.3.3 --- Post-processing to Reduce Capacitance --- p.36Chapter 3.4 --- Experimental Results --- p.39Chapter 3.4.1 --- Experiment Setup --- p.39Chapter 3.4.2 --- Validations of the Delay and Slew Estimation --- p.39Chapter 3.4.3 --- Comparisons with the Tree Grow (TG) Approach --- p.41Chapter 3.4.4 --- Lowest Achievable Delays --- p.42Chapter 3.4.5 --- Simulation Results --- p.42Chapter 4 --- Non-tree Based Post-Grid Clock Routing Problem --- p.44Chapter 4.1 --- Introduction --- p.44Chapter 4.2 --- Handling Ports with Large Load Capacitances --- p.46Chapter 4.2.1 --- Problem Ports Identification --- p.47Chapter 4.2.2 --- Non-Tree Construction --- p.47Chapter 4.2.3 --- Wire Link Selection --- p.48Chapter 4.3 --- Path Expansion in Non-tree Algorithm --- p.51Chapter 4.4 --- Limitations of the Non-tree Algorithm --- p.51Chapter 4.5 --- Experimental Results --- p.51Chapter 4.5.1 --- Experiment Setup --- p.51Chapter 4.5.2 --- Validations of the Delay and Slew Estimation --- p.52Chapter 4.5.3 --- Lowest Achievable Delays --- p.53Chapter 4.5.4 --- Results on New Benchmarks --- p.53Chapter 4.5.5 --- Simulation Results --- p.55Chapter 5 --- Efficient Partitioning-based Extension --- p.57Chapter 5.1 --- Introduction --- p.57Chapter 5.2 --- Partition-based Extension --- p.58Chapter 5.3 --- Experimental Results --- p.61Chapter 5.3.1 --- Experiment Setup --- p.61Chapter 5.3.2 --- Running Time Improvement with Partitioning Technique --- p.61Chapter 6 --- Conclusion --- p.63Bibliography --- p.6

Embedded electronic systems driven by run-time reconfigurable hardware

Abstract This doctoral thesis addresses the design of embedded electronic systems based on run-time reconfigurable hardware technology –available through SRAM-based FPGA/SoC devices– aimed at contributing to enhance the life quality of the human beings. This work does research on the conception of the system architecture and the reconfiguration engine that provides to the FPGA the capability of dynamic partial reconfiguration in order to synthesize, by means of hardware/software co-design, a given application partitioned in processing tasks which are multiplexed in time and space, optimizing thus its physical implementation –silicon area, processing time, complexity, flexibility, functional density, cost and power consumption– in comparison with other alternatives based on static hardware (MCU, DSP, GPU, ASSP, ASIC, etc.). The design flow of such technology is evaluated through the prototyping of several engineering applications (control systems, mathematical coprocessors, complex image processors, etc.), showing a high enough level of maturity for its exploitation in the industry.Resumen Esta tesis doctoral abarca el diseño de sistemas electrónicos embebidos basados en tecnología hardware dinámicamente reconfigurable –disponible a través de dispositivos lógicos programables SRAM FPGA/SoC– que contribuyan a la mejora de la calidad de vida de la sociedad. Se investiga la arquitectura del sistema y del motor de reconfiguración que proporcione a la FPGA la capacidad de reconfiguración dinámica parcial de sus recursos programables, con objeto de sintetizar, mediante codiseño hardware/software, una determinada aplicación particionada en tareas multiplexadas en tiempo y en espacio, optimizando así su implementación física –área de silicio, tiempo de procesado, complejidad, flexibilidad, densidad funcional, coste y potencia disipada– comparada con otras alternativas basadas en hardware estático (MCU, DSP, GPU, ASSP, ASIC, etc.). Se evalúa el flujo de diseño de dicha tecnología a través del prototipado de varias aplicaciones de ingeniería (sistemas de control, coprocesadores aritméticos, procesadores de imagen, etc.), evidenciando un nivel de madurez viable ya para su explotación en la industria.Resum Aquesta tesi doctoral està orientada al disseny de sistemes electrònics empotrats basats en tecnologia hardware dinàmicament reconfigurable –disponible mitjançant dispositius lògics programables SRAM FPGA/SoC– que contribueixin a la millora de la qualitat de vida de la societat. S’investiga l’arquitectura del sistema i del motor de reconfiguració que proporcioni a la FPGA la capacitat de reconfiguració dinàmica parcial dels seus recursos programables, amb l’objectiu de sintetitzar, mitjançant codisseny hardware/software, una determinada aplicació particionada en tasques multiplexades en temps i en espai, optimizant així la seva implementació física –àrea de silici, temps de processat, complexitat, flexibilitat, densitat funcional, cost i potència dissipada– comparada amb altres alternatives basades en hardware estàtic (MCU, DSP, GPU, ASSP, ASIC, etc.). S’evalúa el fluxe de disseny d’aquesta tecnologia a través del prototipat de varies aplicacions d’enginyeria (sistemes de control, coprocessadors aritmètics, processadors d’imatge, etc.), demostrant un nivell de maduresa viable ja per a la seva explotació a la indústria

VLSI Design

This book provides some recent advances in design nanometer VLSI chips. The selected topics try to present some open problems and challenges with important topics ranging from design tools, new post-silicon devices, GPU-based parallel computing, emerging 3D integration, and antenna design. The book consists of two parts, with chapters such as: VLSI design for multi-sensor smart systems on a chip, Three-dimensional integrated circuits design for thousand-core processors, Parallel symbolic analysis of large analog circuits on GPU platforms, Algorithms for CAD tools VLSI design, A multilevel memetic algorithm for large SAT-encoded problems, etc

Fast floorplanning by look-ahead enabled recursive bipartitioning

A new paradigm is introduced for floorplanning any combination of fixed-shape and variable-shape blocks under tight fixed-outline area constraints and a wirelength objective. Dramatic improvement over traditional floorplanning methods is achieved by explicit construction of strictly legal layouts for every partition block at every level of a cutsize-driven, top-down hierarchy. By scalably incorporating legalization into the hierarchical flow, post-hoc legalization is successfully eliminated. For large floorplanning benchmarks, an implementation, called PATOMA, generates solutions with half the wirelength of state-of-the-art floorplanners in orders of magnitude less run time. Experiments on standard GSRC industry benchmarks compare an implementation, called PATOMA, to the Traffic floorplanner and to both the default and high-effort modes of the Parquet-2 floorplanner. With all blocks hard, PATOMA’s average wirelength is 38 % shorter than Traffic’s in the same run time. With all blocks soft, PATOMA on average produces wirelengths 16 % shorter than Parquet-2’s default mode and runs 37 ¢ faster. Compared to the high-effort mode of Parquet-2, PATOMA’s average wirelength is 8 % shorter, and it runs 824 ¢ faster, on average. I