935 research outputs found
An Efficient Uplink Multi-Connectivity Scheme for 5G mmWave Control Plane Applications
The millimeter wave (mmWave) frequencies offer the potential of orders of
magnitude increases in capacity for next-generation cellular systems. However,
links in mmWave networks are susceptible to blockage and may suffer from rapid
variations in quality. Connectivity to multiple cells - at mmWave and/or
traditional frequencies - is considered essential for robust communication. One
of the challenges in supporting multi-connectivity in mmWaves is the
requirement for the network to track the direction of each link in addition to
its power and timing. To address this challenge, we implement a novel uplink
measurement system that, with the joint help of a local coordinator operating
in the legacy band, guarantees continuous monitoring of the channel propagation
conditions and allows for the design of efficient control plane applications,
including handover, beam tracking and initial access. We show that an
uplink-based multi-connectivity approach enables less consuming, better
performing, faster and more stable cell selection and scheduling decisions with
respect to a traditional downlink-based standalone scheme. Moreover, we argue
that the presented framework guarantees (i) efficient tracking of the user in
the presence of the channel dynamics expected at mmWaves, and (ii) fast
reaction to situations in which the primary propagation path is blocked or not
available.Comment: Submitted for publication in IEEE Transactions on Wireless
Communications (TWC
Channel Dynamics and SNR Tracking in Millimeter Wave Cellular Systems
The millimeter wave (mmWave) frequencies are likely to play a significant
role in fifth-generation (5G) cellular systems. A key challenge in developing
systems in these bands is the potential for rapid channel dynamics: since
mmWave signals are blocked by many materials, small changes in the position or
orientation of the handset relative to objects in the environment can cause
large swings in the channel quality. This paper addresses the issue of tracking
the signal to noise ratio (SNR), which is an essential procedure for rate
prediction, handover and radio link failure detection. A simple method for
estimating the SNR from periodic synchronization signals is considered. The
method is then evaluated using real experiments in common blockage scenarios
combined with outdoor statistical models
Millimeter Wave Cellular Networks: A MAC Layer Perspective
The millimeter wave (mmWave) frequency band is seen as a key enabler of
multi-gigabit wireless access in future cellular networks. In order to overcome
the propagation challenges, mmWave systems use a large number of antenna
elements both at the base station and at the user equipment, which lead to high
directivity gains, fully-directional communications, and possible noise-limited
operations. The fundamental differences between mmWave networks and traditional
ones challenge the classical design constraints, objectives, and available
degrees of freedom. This paper addresses the implications that highly
directional communication has on the design of an efficient medium access
control (MAC) layer. The paper discusses key MAC layer issues, such as
synchronization, random access, handover, channelization, interference
management, scheduling, and association. The paper provides an integrated view
on MAC layer issues for cellular networks, identifies new challenges and
tradeoffs, and provides novel insights and solution approaches.Comment: 21 pages, 9 figures, 2 tables, to appear in IEEE Transactions on
Communication
Improved Handover Through Dual Connectivity in 5G mmWave Mobile Networks
The millimeter wave (mmWave) bands offer the possibility of orders of
magnitude greater throughput for fifth generation (5G) cellular systems.
However, since mmWave signals are highly susceptible to blockage, channel
quality on any one mmWave link can be extremely intermittent. This paper
implements a novel dual connectivity protocol that enables mobile user
equipment (UE) devices to maintain physical layer connections to 4G and 5G
cells simultaneously. A novel uplink control signaling system combined with a
local coordinator enables rapid path switching in the event of failures on any
one link. This paper provides the first comprehensive end-to-end evaluation of
handover mechanisms in mmWave cellular systems. The simulation framework
includes detailed measurement-based channel models to realistically capture
spatial dynamics of blocking events, as well as the full details of MAC, RLC
and transport protocols. Compared to conventional handover mechanisms, the
study reveals significant benefits of the proposed method under several
metrics.Comment: 16 pages, 13 figures, to appear on the 2017 IEEE JSAC Special Issue
on Millimeter Wave Communications for Future Mobile Network
End-to-End Simulation of 5G mmWave Networks
Due to its potential for multi-gigabit and low latency wireless links,
millimeter wave (mmWave) technology is expected to play a central role in 5th
generation cellular systems. While there has been considerable progress in
understanding the mmWave physical layer, innovations will be required at all
layers of the protocol stack, in both the access and the core network.
Discrete-event network simulation is essential for end-to-end, cross-layer
research and development. This paper provides a tutorial on a recently
developed full-stack mmWave module integrated into the widely used open-source
ns--3 simulator. The module includes a number of detailed statistical channel
models as well as the ability to incorporate real measurements or ray-tracing
data. The Physical (PHY) and Medium Access Control (MAC) layers are modular and
highly customizable, making it easy to integrate algorithms or compare
Orthogonal Frequency Division Multiplexing (OFDM) numerologies, for example.
The module is interfaced with the core network of the ns--3 Long Term Evolution
(LTE) module for full-stack simulations of end-to-end connectivity, and
advanced architectural features, such as dual-connectivity, are also available.
To facilitate the understanding of the module, and verify its correct
functioning, we provide several examples that show the performance of the
custom mmWave stack as well as custom congestion control algorithms designed
specifically for efficient utilization of the mmWave channel.Comment: 25 pages, 16 figures, submitted to IEEE Communications Surveys and
Tutorials (revised Jan. 2018
Context Information Based Initial Cell Search for Millimeter Wave 5G Cellular Networks
Millimeter wave (mmWave) communication is envisioned as a cornerstone to
fulfill the data rate requirements for fifth generation (5G) cellular networks.
In mmWave communication, beamforming is considered as a key technology to
combat the high path-loss, and unlike in conventional microwave communication,
beamforming may be necessary even during initial access/cell search. Among the
proposed beamforming schemes for initial cell search, analog beamforming is a
power efficient approach but suffers from its inherent search delay during
initial access. In this work, we argue that analog beamforming can still be a
viable choice when context information about mmWave base stations (BS) is
available at the mobile station (MS). We then study how the performance of
analog beamforming degrades in case of angular errors in the available context
information. Finally, we present an analog beamforming receiver architecture
that uses multiple arrays of Phase Shifters and a single RF chain to combat the
effect of angular errors, showing that it can achieve the same performance as
hybrid beamforming
Toward End-to-End, Full-Stack 6G Terahertz Networks
Recent evolutions in semiconductors have brought the terahertz band in the
spotlight as an enabler for terabit-per-second communications in 6G networks.
Most of the research so far, however, has focused on understanding the physics
of terahertz devices, circuitry and propagation, and on studying physical layer
solutions. However, integrating this technology in complex mobile networks
requires a proper design of the full communication stack, to address link- and
system-level challenges related to network setup, management, coordination,
energy efficiency, and end-to-end connectivity. This paper provides an overview
of the issues that need to be overcome to introduce the terahertz spectrum in
mobile networks, from a MAC, network and transport layer perspective, with
considerations on the performance of end-to-end data flows on terahertz
connections.Comment: Published on IEEE Communications Magazine, THz Communications: A
Catalyst for the Wireless Future, 7 pages, 6 figure
- …