Fast and Accurate 3D Face Recognition Using Registration to an Intrinsic Coordinate System and Fusion of Multiple Region classifiers

In this paper we present a new robust approach for 3D face registration to an intrinsic coordinate system of the face. The intrinsic coordinate system is defined by the vertical symmetry plane through the nose, the tip of the nose and the slope of the bridge of the nose. In addition, we propose a 3D face classifier based on the fusion of many dependent region classifiers for overlapping face regions. The region classifiers use PCA-LDA for feature extraction and the likelihood ratio as a matching score. Fusion is realised using straightforward majority voting for the identification scenario. For verification, a voting approach is used as well and the decision is defined by comparing the number of votes to a threshold. Using the proposed registration method combined with a classifier consisting of 60 fused region classifiers we obtain a 99.0% identification rate on the all vs first identification test of the FRGC v2 data. A verification rate of 94.6% at FAR=0.1% was obtained for the all vs all verification test on the FRGC v2 data using fusion of 120 region classifiers. The first is the highest reported performance and the second is in the top-5 of best performing systems on these tests. In addition, our approach is much faster than other methods, taking only 2.5 seconds per image for registration and less than 0.1 ms per comparison. Because we apply feature extraction using PCA and LDA, the resulting template size is also very small: 6 kB for 60 region classifiers

Setting a world record in 3D face recognition

Biometrics - recognition of persons based on how they look or behave, is the main subject of research at the Chair of Biometric Pattern Recognition (BPR) of the Services, Cyber Security and Safety Group (SCS) of the EEMCS Faculty at the University of Twente. Examples are finger print recognition, iris and face recognition. A relatively new field is 3D face recognition based on the shape of the face rather that its appearance. This paper presents a method for 3D face recognition developed at the Chair of Biometric Pattern Recognition (BPR) of the Services, Cyber Security and Safety Group (SCS) of the EEMCS Faculty at the University of Twente and published in 2011. The paper also shows that noteworthy performance gains can be obtained by optimisation of an existing method. The method is based on registration to an intrinsic coordinate system using the vertical symmetry plane of the head, the tip of the nose and the slope of the nose bridge. For feature extraction and classification multiple regional PCA-LDA-likelihood ratio based classifiers are fused using a fixed FAR voting strategy. We present solutions for correction of motion artifacts in 3D scans, improved registration and improved training of the used PCA-LDA classifier using automatic outlier removal. These result in a notable improvement of the recognition rates. The all vs all verification rate for the FRGC v2 dataset jumps to 99.3% and the identification rate for the all vs first to 99.4%. Both are to our knowledge the best results ever obtained for these benchmarks by a fairly large margin

State of the Art in Face Recognition

Notwithstanding the tremendous effort to solve the face recognition problem, it is not possible yet to design a face recognition system with a potential close to human performance. New computer vision and pattern recognition approaches need to be investigated. Even new knowledge and perspectives from different fields like, psychology and neuroscience must be incorporated into the current field of face recognition to design a robust face recognition system. Indeed, many more efforts are required to end up with a human like face recognition system. This book tries to make an effort to reduce the gap between the previous face recognition research state and the future state

TractorEYE: Vision-based Real-time Detection for Autonomous Vehicles in Agriculture

Agricultural vehicles such as tractors and harvesters have for decades been able to navigate automatically and more efficiently using commercially available products such as auto-steering and tractor-guidance systems. However, a human operator is still required inside the vehicle to ensure the safety of vehicle and especially surroundings such as humans and animals. To get fully autonomous vehicles certified for farming, computer vision algorithms and sensor technologies must detect obstacles with equivalent or better than human-level performance. Furthermore, detections must run in real-time to allow vehicles to actuate and avoid collision.This thesis proposes a detection system (TractorEYE), a dataset (FieldSAFE), and procedures to fuse information from multiple sensor technologies to improve detection of obstacles and to generate a map. TractorEYE is a multi-sensor detection system for autonomous vehicles in agriculture. The multi-sensor system consists of three hardware synchronized and registered sensors (stereo camera, thermal camera and multi-beam lidar) mounted on/in a ruggedized and water-resistant casing. Algorithms have been developed to run a total of six detection algorithms (four for rgb camera, one for thermal camera and one for a Multi-beam lidar) and fuse detection information in a common format using either 3D positions or Inverse Sensor Models. A GPU powered computational platform is able to run detection algorithms online. For the rgb camera, a deep learning algorithm is proposed DeepAnomaly to perform real-time anomaly detection of distant, heavy occluded and unknown obstacles in agriculture. DeepAnomaly is -- compared to a state-of-the-art object detector Faster R-CNN -- for an agricultural use-case able to detect humans better and at longer ranges (45-90m) using a smaller memory footprint and 7.3-times faster processing. Low memory footprint and fast processing makes DeepAnomaly suitable for real-time applications running on an embedded GPU. FieldSAFE is a multi-modal dataset for detection of static and moving obstacles in agriculture. The dataset includes synchronized recordings from a rgb camera, stereo camera, thermal camera, 360-degree camera, lidar and radar. Precise localization and pose is provided using IMU and GPS. Ground truth of static and moving obstacles (humans, mannequin dolls, barrels, buildings, vehicles, and vegetation) are available as an annotated orthophoto and GPS coordinates for moving obstacles. Detection information from multiple detection algorithms and sensors are fused into a map using Inverse Sensor Models and occupancy grid maps. This thesis presented many scientific contribution and state-of-the-art within perception for autonomous tractors; this includes a dataset, sensor platform, detection algorithms and procedures to perform multi-sensor fusion. Furthermore, important engineering contributions to autonomous farming vehicles are presented such as easily applicable, open-source software packages and algorithms that have been demonstrated in an end-to-end real-time detection system. The contributions of this thesis have demonstrated, addressed and solved critical issues to utilize camera-based perception systems that are essential to make autonomous vehicles in agriculture a reality

Continuous Human Activity Tracking over a Large Area with Multiple Kinect Sensors

In recent years, researchers had been inquisitive about the use of technology to enhance the healthcare and wellness of patients with dementia. Dementia symptoms are associated with the decline in thinking skills and memory severe enough to reduce a person’s ability to pay attention and perform daily activities. Progression of dementia can be assessed by monitoring the daily activities of the patients. This thesis encompasses continuous localization and behavioral analysis of patient’s motion pattern over a wide area indoor living space using multiple calibrated Kinect sensors connected over the network. The skeleton data from all the sensor is transferred to the host computer via TCP sockets into Unity software where it is integrated into a single world coordinate system using calibration technique. Multiple cameras are placed with some overlap in the field of view for the successful calibration of the cameras and continuous tracking of the patients. Localization and behavioral data are stored in a CSV file for further analysis