Fast Mapping of Short Sequences with Mismatches, Insertions and Deletions Using Index Structures

With few exceptions, current methods for short read mapping make use of simple seed heuristics to speed up the search. Most of the underlying matching models neglect the necessity to allow not only mismatches, but also insertions and deletions. Current evaluations indicate, however, that very different error models apply to the novel high-throughput sequencing methods. While the most frequent error-type in Illumina reads are mismatches, reads produced by 454's GS FLX predominantly contain insertions and deletions (indels). Even though 454 sequencers are able to produce longer reads, the method is frequently applied to small RNA (miRNA and siRNA) sequencing. Fast and accurate matching in particular of short reads with diverse errors is therefore a pressing practical problem. We introduce a matching model for short reads that can, besides mismatches, also cope with indels. It addresses different error models. For example, it can handle the problem of leading and trailing contaminations caused by primers and poly-A tails in transcriptomics or the length-dependent increase of error rates. In these contexts, it thus simplifies the tedious and error-prone trimming step. For efficient searches, our method utilizes index structures in the form of enhanced suffix arrays. In a comparison with current methods for short read mapping, the presented approach shows significantly increased performance not only for 454 reads, but also for Illumina reads. Our approach is implemented in the software segemehl available at http://www.bioinf.uni-leipzig.de/Software/segemehl/

Fast Mapping of Short Sequences with Mismatches, Insertions and Deletions Using Index Structures

With few exceptions, current methods for short read mapping make use of simple seed heuristics to speed up the search. Most of the underlying matching models neglect the necessity to allow not only mismatches, but also insertions and deletions. Current evaluations indicate, however, that very different error models apply to the novel high-throughput sequencing methods. While the most frequent error-type in Illumina reads are mismatches, reads produced by 454's GS FLX predominantly contain insertions and deletions (indels). Even though 454 sequencers are able to produce longer reads, the method is frequently applied to small RNA (miRNA and siRNA) sequencing. Fast and accurate matching in particular of short reads with diverse errors is therefore a pressing practical problem. We introduce a matching model for short reads that can, besides mismatches, also cope with indels. It addresses different error models. For example, it can handle the problem of leading and trailing contaminations caused by primers and poly-A tails in transcriptomics or the length-dependent increase of error rates. In these contexts, it thus simplifies the tedious and error-prone trimming step. For efficient searches, our method utilizes index structures in the form of enhanced suffix arrays. In a comparison with current methods for short read mapping, the presented approach shows significantly increased performance not only for 454 reads, but also for Illumina reads. Our approach is implemented in the software segemehl available at http://www.bioinf.uni-leipzig.de/Software/segemehl/

Accurate long read mapping using enhanced suffix arrays

With the rise of high throughput sequencing, new programs have been developed for dealing with the alignment of a huge amount of short read data to reference genomes. Recent developments in sequencing technology allow longer reads, but the mappers for short reads are not suited for reads of several hundreds of base pairs. We propose an algorithm for mapping longer reads, which is based on chaining maximal exact matches and uses heuristics and the Needleman-Wunsch algorithm to bridge the gaps. To compute maximal exact matches we use a specialized index structure, called enhanced suffix array. The proposed algorithm is very accurate and can handle large reads with mutations and long insertions and deletions

SOAP3-dp: Fast, Accurate and Sensitive GPU-based Short Read Aligner

To tackle the exponentially increasing throughput of Next-Generation Sequencing (NGS), most of the existing short-read aligners can be configured to favor speed in trade of accuracy and sensitivity. SOAP3-dp, through leveraging the computational power of both CPU and GPU with optimized algorithms, delivers high speed and sensitivity simultaneously. Compared with widely adopted aligners including BWA, Bowtie2, SeqAlto, GEM and GPU-based aligners including BarraCUDA and CUSHAW, SOAP3-dp is two to tens of times faster, while maintaining the highest sensitivity and lowest false discovery rate (FDR) on Illumina reads with different lengths. Transcending its predecessor SOAP3, which does not allow gapped alignment, SOAP3-dp by default tolerates alignment similarity as low as 60 percent. Real data evaluation using human genome demonstrates SOAP3-dp's power to enable more authentic variants and longer Indels to be discovered. Fosmid sequencing shows a 9.1 percent FDR on newly discovered deletions. SOAP3-dp natively supports BAM file format and provides a scoring scheme same as BWA, which enables it to be integrated into existing analysis pipelines. SOAP3-dp has been deployed on Amazon-EC2, NIH-Biowulf and Tianhe-1A.Comment: 21 pages, 6 figures, submitted to PLoS ONE, additional files available at "https://www.dropbox.com/sh/bhclhxpoiubh371/O5CO_CkXQE". Comments most welcom

Simultaneous alignment of short reads against multiple genomes

New software for the alignment of short-read sequence data to multiple genomes allows identification of polymorphisms that cannot be identified by alignment to a single reference genome

A comprehensive evaluation of alignment algorithms in the context of RNA-seq.

Transcriptome sequencing (RNA-Seq) overcomes limitations of previously used RNA quantification methods and provides one experimental framework for both high-throughput characterization and quantification of transcripts at the nucleotide level. The first step and a major challenge in the analysis of such experiments is the mapping of sequencing reads to a transcriptomic origin including the identification of splicing events. In recent years, a large number of such mapping algorithms have been developed, all of which have in common that they require algorithms for aligning a vast number of reads to genomic or transcriptomic sequences. Although the FM-index based aligner Bowtie has become a de facto standard within mapping pipelines, a much larger number of possible alignment algorithms have been developed also including other variants of FM-index based aligners. Accordingly, developers and users of RNA-seq mapping pipelines have the choice among a large number of available alignment algorithms. To provide guidance in the choice of alignment algorithms for these purposes, we evaluated the performance of 14 widely used alignment programs from three different algorithmic classes: algorithms using either hashing of the reference transcriptome, hashing of reads, or a compressed FM-index representation of the genome. Here, special emphasis was placed on both precision and recall and the performance for different read lengths and numbers of mismatches and indels in a read. Our results clearly showed the significant reduction in memory footprint and runtime provided by FM-index based aligners at a precision and recall comparable to the best hash table based aligners. Furthermore, the recently developed Bowtie 2 alignment algorithm shows a remarkable tolerance to both sequencing errors and indels, thus, essentially making hash-based aligners obsolete

Inexact Mapping of Short Biological Sequences in High Performance Computational Environments

La bioinformática es la aplicación de las ciencias computacionales a la gestión y análisis de datos biológicos. A partir de 2005, con la aparición de los secuenciadores de ADN de nueva generación surge lo que se conoce como Next Generation Sequencing o NGS. Un único experimento biológico puesto en marcha en una máquina de secuenciación NGS puede producir fácilmente cientos de gigabytes o incluso terabytes de datos. Dependiendo de la técnica elegida este proceso puede realizarse en unas pocas horas o días. La disponibilidad de recursos locales asequibles, tales como los procesadores multinúcleo o las nuevas tarjetas gráfi cas preparadas para el cálculo de propósito general GPGPU (General Purpose Graphic Processing Unit ), constituye una gran oportunidad para hacer frente a estos problemas. En la actualidad, un tema abordado con frecuencia es el alineamiento de secuencias de ADN. En bioinformática, el alineamiento permite comparar dos o más secuencias de ADN, ARN, o estructuras primarias proteicas, resaltando sus zonas de similitud. Dichas similitudes podrían indicar relaciones funcionales o evolutivas entre los genes o proteínas consultados. Además, la existencia de similitudes entre las secuencias de un individuo paciente y de otro individuo con una enfermedad genética detectada podría utilizarse de manera efectiva en el campo de la medicina diagnóstica. El problema en torno al que gira el desarrollo de la tesis doctoral consiste en la localización de fragmentos de secuencia cortos dentro del ADN. Esto se conoce bajo el sobrenombre de mapeo de secuencia o sequence mapping. Dicho mapeo debe permitir errores, pudiendo mapear secuencias incluso existiendo variabilidad genética o errores de lectura en el mapeo. Existen diversas técnicas para abordar el mapeo, pero desde la aparición de la NGS destaca la búsqueda por pre jos indexados y agrupados mediante la transformada de Burrows-Wheeler [28] (o BWT en lo sucesivo). Dicha transformada se empleó originalmente en técnicas de compresión de datos, como es el caso del algoritmo bzip2. Su utilización como herramienta para la indización y búsqueda posterior de información es más reciente [22]. La ventaja es que su complejidad computacional depende únicamente de la longitud de la secuencia a mapear. Por otra parte, una gran cantidad de técnicas de alineamiento se basan en algoritmos de programación dinámica, ya sea Smith-Watterman o modelos ocultos de Markov. Estos proporcionan mayor sensibilidad, permitiendo mayor cantidad de errores, pero su coste computacional es mayor y depende del tamaño de la secuencia multiplicado por el de la cadena de referencia. Muchas herramientas combinan una primera fase de búsqueda con la BWT de regiones candidatas al alineamiento y una segunda fase de alineamiento local en la que se mapean cadenas con Smith-Watterman o HMM. Cuando estamos mapeando permitiendo pocos errores, una segunda fase con un algoritmo de programación dinámica resulta demasiado costosa, por lo que una búsqueda inexacta basada en BWT puede resultar más e ficiente. La principal motivación de la tesis doctoral es la implementación de un algoritmo de búsqueda inexacta basado únicamente en la BWT, adaptándolo a las arquitecturas paralelas modernas, tanto en CPU como en GPGPU. El algoritmo constituirá un método nuevo de rami cación y poda adaptado a la información genómica. Durante el periodo de estancia se estudiarán los Modelos ocultos de Markov y se realizará una implementación sobre modelos de computación funcional GTA (Aggregate o Test o Generate), así como la paralelización en memoria compartida y distribuida de dicha plataforma de programación funcional.Salavert Torres, J. (2014). Inexact Mapping of Short Biological Sequences in High Performance Computational Environments [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/43721TESI

Context-based RNA-seq mapping

In recent years, the sequencing of RNA (RNA-seq) using next generation sequencing (NGS) technology has become a powerful tool for analyzing the transcriptomic state of a cell. Modern NGS platforms allow for performing RNA-seq experiments in a few days, resulting in millions of short sequencing reads. A crucial step in analyzing RNA-seq data generally is determining the transcriptomic origin of the sequencing reads (= read mapping). In principal, read mapping is a sequence alignment problem, in which the short sequencing reads (30 - 500 nucleotides) are aligned to much larger reference sequences such as the human genome (3 billion nucleotides). In this thesis, we present ContextMap, an RNA-seq mapping approach that evaluates the context of the sequencing reads for determining the most likely origin of every read. The context of a sequencing read is defined by all other reads aligned to the same genomic region. The ContextMap project started with a proof of concept study, in which we showed that our approach is able to improve already existing read mapping results provided by other mapping programs. Subsequently, we developed a standalone version of ContextMap. This implementation no longer relied on mapping results of other programs, but determined initial alignments itself using a modification of the Bowtie short read alignment program. However, the original ContextMap implementation had several drawbacks. In particular, it was not able to predict reads spanning over more than two exons and to detect insertions or deletions (indels). Furthermore, ContextMap depended on a modification of a specific Bowtie version. Thus, it could neither benefit of Bowtie updates nor of novel developments (e.g. improved running times) in the area of short read alignment software. For addressing these problems, we developed ContextMap 2, an extension of the original ContextMap algorithm. The key features of ContextMap 2 are the context-based resolution of ambiguous read alignments and the accurate detection of reads crossing an arbitrary number of exon-exon junctions or containing indels. Furthermore, a plug-in interface is provided that allows for the easy integration of alternative short read alignment programs (e.g. Bowtie 2 or BWA) into the mapping workflow. The performance of ContextMap 2 was evaluated on real-life as well as synthetic data and compared to other state-of-the-art mapping programs. We found that ContextMap 2 had very low rates of misplaced reads and incorrectly predicted junctions or indels. Additionally, recall values were as high as for the top competing methods. Moreover, the runtime of ContextMap 2 was at least two fold lower than for the best competitors. In addition to the mapping of sequencing reads to a single reference, the ContextMap approach allows the investigation of several potential read sources (e.g. the human host and infecting pathogens) in parallel. Thus, ContextMap can be applied to mine for infections or contaminations or to map data from meta-transcriptomic studies. Furthermore, we developed methods based on mapping-derived statistics that allow to assess confidence of mappings to identified species and to detect false positive hits. ContextMap was evaluated on three real-life data sets and results were compared to metagenomics tools. Here, we showed that ContextMap can successfully identify the species contained in a sample. Moreover, in contrast to most other metagenomics approaches, ContextMap also provides read mapping results to individual species. As a consequence, read mapping results determined by ContextMap can be used to study the gene expression of all species contained in a sample at the same time. Thus, ContextMap might be applied in clinical studies, in which the influence of infecting agents on host organisms is investigated. The methods presented in this thesis allow for an accurate and fast mapping of RNA-seq data. As the amount of available sequencing data increases constantly, these methods will likely become an important part of many RNA-seq data analyses and thus contribute valuably to research in the field of transcriptomics